ReviewsExternal Power Supply

Lyetny White-Tailed Deer Acrylic LED Light Alarm Clock Battery Power Supply for Bedroom Office

  • Power Supply Mode: USB line power supply. It has a built-in 1000MA lithium battery, it can be work even if losing the supply of external power..
  • Extra USB Power Supply Interface: Very useful and convenient, you can use it to charge your mobile phone while the clock being plugged into an....
  • Power Saving: It has voice display light function which could use sound to make the display light about 10 seconds. It can set 3 groups of alarm..
Check Stock

Zyyini Laptop External Independent Video Card Dock, External PCI-E Discrete Graphics Card Mini PCI-E 220W DC 12V Support 6Pin+8P Interface Output Without Power Supply

  • Improve computer performance: The notebook computer external independent graphics card base supports dual TD compatible switching (hardware conflict resolution), multi-level anti-interference circuit and data cable reinforcement, which can help the computer use an independent external high-performance graphics card..
  • Output Interface: The 8p power output interface of the external independent graphics card base of the laptop can be connected to a 220W power supply and an ATX line and an ATX desktop power supply to improve the performance of the laptop..
  • Protect the circuit: The stand-alone graphics card base of the notebook computer adopts the reinforced design of the data transmission line, and the high-quality electronic components can isolate and protect the circuit..
  • Play exciting games: The external device of the notebook computer can play games that require high-performance graphics cards. Compatible with graphics cards, sound cards, array cards, graphics cards, capture cards, etc..
  • Application: The external discrete graphics card base is used for industrial applications such ....
Check Stock

Serounder Laptop External Independent Video Card Dock for Mini PCI-E Without Power Supply

  • ... see the update method in the official website of your laptop.) Enter in Computer-Device Management-System. Disable PCI related port until the built-in independent graphics card is gone..
  • Instructions 2: Restart the notebook after the hardware installation is complete. The external graphics card power supply is controlled by the laptop, the external graphics card start when the laptop is activated, the external graphics card can close when the laptop is closed. The 6Pin interface of the graphics card must be connected correctly, otherwise the power supply is insufficient..
Check Stock

YHJIC V8.5C EXP GDC Laptop External Independent Video Card Dock NGFF Notebook PCI-E Expansion Device

  • If you use N series card which over GTS450, and your laptop own Core ,and use the EGPU software to set,then it can use the laptop internal....
  • power supply interface:Support 12 volt power supply input interface type outer diameter 5.5MM, inner diameter 2.1MM, maximum power 150W, support the....
  • 6P power output:The maximum provides the interface output 6PIN+8PIN, maximum support 12A, maximum support 18A output with the motherboard and the. If....
  • 8P power supply interface:The main board and the equipment of the power supply interface, support soft switch function (notebook starting power....
  • (screen: use its notebook display need laptop comes with (R) HD and connected above GTS450 as .Otherwise you need external monitor.)The main....
Check Stock

ASUS NVIDIA GeForce GT 730 Graphics Card (PCIe 2.0, 2GB GDDR5 Memory, 4X HDMI Ports, Single-Slot Design, Passive Cooling)

  • EXP GDC is the laptop’s external equipment.
  • It can help them to use the independent external high-performance graphics, can be used to use any of the pci-e interface equipment, to improve the performance of the laptop, so that they can play the huge game requirement high high-performance graphics..
  • The EXP GDC notebook external independent video card base has an Express card data cable and a 6-pin/8-pin power cable..
  • The enhanced MINI PCI-E data cable , uses a 26pin interface and supports Type 54 and Type 34 Express card interfaces..
  • With 6pin interface for connecting graphics card power supply.
  • 8pin interface for connecting EXP GDC power supply..
  • Industrial applications such as engineering measurement, data acquisition, server debugging, GPU computing, etc., of course, can still be used to access most graphics cards to play games..
Check Stock

20/24 4/6/8 Pin Computer PC Power Supply Tester with LCD Display and Buzzer for ATX, ITX, BTX, PCI E, SATA, HDD

  • ...em, the hardware of the computer system may work abnormally or even burn out. To measure whether the output voltage output of the power supply is stable, the player usually uses a multimeter. But for the average user is still a little troublesome..
  • NOTE: It can also measure the output wire P4/P6/P8/SATA/IDE, and the external DIE/SATA/P6/P8 is the light display, there is no LCD voltage. There is LCD voltage display only when connecting to the 24pin or 20pin..
Check Stock

Atwood/Hydroflame 33521MC Ignition Board

  • DUAL SENSE - Flame sense works through high voltage connector and edge connector simultaneously.
  • EXTERNAL SENSE -Connector on the board for external sense wire.
  • DIAGNOSTIC-AID LED on board is green to show power to board.
  • VOLTAGE REGULATOR -Cleans up the 12 Volt supply power.
Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A,5V (Micro-USB),9~24V Power Port, for High-Power Device

  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10, Linux, Ubuntu, MacOS systems, no need drive file, plug and play. If the USB device needs to be restarted, the device can be powered off and restarted through the switching power supply without plugging and damaging the interface..
  • Size support Raspberry Pi stack installation -- Support installation of Raspberry Pi 4B/3B+/3B,The kit contains the exclusive copper column screw accessories for jetson nano and raspberry pi, the material is of reliable....
Check Stock

ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

HiLetgo USBTiny USBtinyISP AVR ISP Programmer 6/10 Pin Bootloader for Arduino UNO MEGA

  • Power supply options: external power supply and USB power.
Check Stock