ReviewsExternal Resistor For 12v Coil

Full Version USB Hart Modem WS232UP Hart -USB Modem Hart Transmitter with Built-in 24VDC & Loop Resistor for All HART Device

• The Latest Full Version USB HART MODEM WS232UP, With Built-in 24V DC & Loop Resistor, Windows XP/7/8/10 Support, Suitable For All Devices Which Support HART Protocol, etc..
• The WS232UP USB-HART Modem provides a complete and flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter. The WS232UP is developed based on BELL202 modem standard, this external interface is rugged and compact and ideal choice for field service, commissioning, engineering, training, table top shows, lunch and learns and demo cases..
• Fully HART compliant for communication with any HART instrument and error-free slave testing * DC-DC isolation power draws from USB port and needs no external power supply.
• * Three modes: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω. The mode is easily slide-switch selected so you’ll always have a power supply or loop resistor with you * Easy installation and use, this modem can power all 2-wire HART devices-independent of supplier.
• * Rugged aluminium alloy case gives you industrial-grade reliability in a small package * Free HART application software for you to configure your HART device * Smart Design, smaller than a normal name card.

Aexit 5pcs Green Fixed Resistors 47 Ohm 25W 5% Chassis Mounted Aluminum Single Resistors Wirewound Resistor

• AxleHole to Hole Center Distance : 45mm/ 1.8".
• Total Size : 53 x 27 x 15mm/ 2.1" x 1.1" x 0.59"(L*W*T).

Aexit 5% 200W Fixed Resistors 50 Ohm Wirewound Aluminum Housed Clad Resistor Gold Tone Single Resistors 12cm Long

• Body Size: 10 x 5.1 x 2.8cm/3.9" x 2" x 1.1"(L*W*T).

All States Ag Parts Parts A.S.A.P. Alternator Conversion Kit fits Ford 2N 9N 8N

• Compatible with Ford Tractor(s) 2N, 8N (s/n 263844-earlier), 9N.
• Includes: Alternator, Resistor, Coil, Wiring Harness, Belt, Brackets, & Hardware Kit.

Total Power Parts New 1100-0544 12 Volt Conversion Coil Internal Resistor Compatible with/Replacement For Ford 8N Tractors 2000 3000 4000 5000 2600 3600 4600 5600 D5Te12029Ab

• 100% New aftermarket Conversion Coil compatible with/replacement for Ford.
• 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare....
• Compatible with/Replacement For: Ford/New Holland: D5TE12029AB.
• Specs: Coil, Notes: Replacement For use with side mount distributor. Can use when converting from 6V to 12V. Has internal resistor..

DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

• Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
• Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
• Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
• Measure the temperature directly in water or soil.
• DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.

5V-12V ZVS Induction Heating Power Supply Module with Coil

• 【Input Voltage】Input Voltage dc5v-12v (we are not guarantee the module will work when the Voltage is over 12V or less than 5V).
• 【Heating Coil】Heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds..
• 【Induction Heating】 Induction heating, power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high..
• 【Wide Application】It can work for DIY players and meet need for small parts quenching, annealing and other heat treatment..
• 【PCB Layout Design】This heating module uses a large PCB layout design which ensures a good heat dissipation and high power..

GM Genuine Parts D1539J Brake Light Switch

• 12 awg tinned copper wires for Pin 30, Pin 87. Length: 5.1in.
• 16 awg tinned copper wires for Pin 85, Pin 86. Length: 5.1in.
• 12-volt relay (max 14-volt). 40a/30a High switching capability.

Aexit 2Pcs Chassis Fixed Resistors Mounted Yellow Aluminum Housing Clad Resistors 10W Single Resistors 82 Ohm

• Mount Hole to Hole Distance : 22mm/0.87".
• Connect Hole to Hole Distance : 27mm/1.1".
• Plate Size : 31 x 21mm/1.1" x 0.83"(L*W).
• Body Size : 18 x 11 x 10mm/ 0.71" x 0.43" x 0.4"(L*W*T).
• Package Content : 2 Pcs x Aluminum Resistor.

ICQUANZX 2pcs DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

• Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
• Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
• Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
• Measure the temperature directly in water or soil.
• DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.

HELLA 933766111 MICRO Relay 12V 20A SPST RES