ReviewsExtra thick Gasket

K2 Coolers Summit 90 Cooler, Gray,S90G

  • One piece roto-molded polyethylene construction for extreme durability.
  • Extra thick insulation for maximum ice retention.
  • Premium features such as ICE vault lid gasket, POSITRAC latches.
  • Professional Grade - Engineered to make the outdoors great!.
Check Stock

K2 Coolers Summit 70 Cooler, White

  • One piece roto-molded polyethylene construction for extreme durability.
  • Extra thick insulation for maximum ice retention.
  • Premium features such as ICE vault lid gasket, POSITRAC latches.
  • Professional Grade - Engineered to make the outdoors great!.
Check Stock

K2 Coolers Summit 60 Cooler, Gray

  • One piece roto-molded polyethylene construction for extreme durability.
  • Extra thick insulation for maximum ice retention.
  • Premium features such as ICE vault lid gasket, POSITRAC latches.
  • Professional Grade - Engineered to make the outdoors great!.
Check Stock

S-9892 Pressure Cooker Gasket Seal - For Mirro Pressure Cooker S9892 9892 M-0296 M-0436 M-0498 M-0536 M-0596 M-0646 M-1952 Replacement ４｜6 ｜ 8 QT Models - 2 Pack

  • Our pressure cooker gasket are made from high-quality, durable, food-grade silicone, Factory sealed and individually wrapped. PLEASE NOTE: Not suitable for S9882, nor suitable for righr pressure cooker seals..
  • Replacement pressure cooker gasket for select 4, 6 and 8 quart pressure cooker,replacement mirro pressure cooker Part Numbers: S-9892, S9892, 9892. Fits Mirro models (may be partial list): M-0296, M-0436, M-0498, M-0536, M-0596, M-0598, M-0646, M-1952, M-1956 (Includes models with -11, -35, etc. such as M-0536-11)..
  • pressure cooker rubber gasket Dimensions :Outside Diameter (OD): 10.08" Inside,Diameter (ID): 10",Thickness: 0.4" All dimensions are approximate considering gaskets can stretch or shrink to fit specific lids..
  • PLEASE NOTE: To ensure compatibility, measure your old gasket and pressure cooker pot. pressure cooker sealing rings are manufactured to arrive up to 1" too large to be resilient to normal shrinkage. soaking your gasket for pressure cooker in warm water for 10 minutes before installing it can increase pliability..
  • Please Note: Mirro no longer manufacturers these gaskets. These are one of the only replacement gaskets on the market for the mirro gasket S-9892. They may differ slightly in thickness from the original gasket and m....
Check Stock

K2 Coolers Summit 120 Cooler, Gray,19.5 x 19.3 x 41.6,S120G

  • One piece roto-molded polyethylene construction for extreme durability.
  • Extra thick insulation for maximum ice retention.
  • Premium features such as ICE vault lid gasket, POSITRAC latches.
  • Professional Grade - Engineered to make the outdoors great!.
Check Stock

Ninja Blender Replacement Parts, Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Auto Iq BL642 Nn102 Bl682 Bl2013 BL450-30 BL482-30 and More(1 Pack, 2 Gasket Rubber)

  • 【SIZE & PACKAGE INCLUDED】 The diameter of the Replacement Parts for Nutri Ninja is 3.94 inches. 1 x 7 Fins Replacement Bottom Blades, 2 x Extra Rubber Gaskets, 1 x Gasket Rubber Replace Tool..
  • 【Easy to Use & Wash】Simply attaches Bottom Blade to the Pro Extractor blade that comes with the blender. The blender blades are made of environmentally friendly materials and are easy to clean..
  • 【WELL BUILT & NO LEAKS】This replacement blade fits perfect in the cup of the ninja and the gasket keeps it sealed without leaking. Exact replica of the original, kept you from buying a new blender..
  • 【NOTICE】1: There is already one gasket in blade when you receive it, the extra gasket is for replace in future,do not install the extra one when test. 2: Please use the matching tool to TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket..
  • 【FIT PERFECTLY 】The 7 Fins Blender Blade is fit for Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender model before purchasing).
Check Stock

Gasket for Primo Grill High Temperature Resistance Gasket Replacement for Large & XL Primo Kamado BBQ Smoker Pre-Shrunk Gasket Primo Self-Stick Felt 14ft Long 3/4 Wide enough for L/XL Primo

  • HIGH TEMPERATURE RESISTANT MATERIALS - Won't burn or melt, much better than others. It is an ideal replacement for a worn or fried gasket on your BBQ....
  • PERFECT FOR YOUR L/XL PRIMO KAMADO - 14feet Long, 3/4" Wide, 1/8" Thick self-adhesive belt is long enough for your Extra-Large or Large Primo Kamado....
  • NO NEED TO CUT FOR THE WIDTH - The felt width is special for L/XL Primo Kamado, no extra cuts needed. Don't worry about accidental tailoring errors....
  • FOLLOW THE INSTRUCTIONS TO EASILY REPLACE - Remove the worn/old gasket on your grill's upper and lower rims, clean the rim completely, dry and apply....
  • NO SMOKE LEAKAGE - Nice tight seal, keeping smoke in your grill and helping you maintain better temperature control. You won't tear up anymore when....
Check Stock

Nature s Way Brid Products WWGHF1 Top Fill Hummingbird Feeder

  • Beautiful, thick, hand blown glass in vibrant colors.
  • Extra wide opening enables easier filling and cleaning.
  • Silicone gasket on lid and flowers for tight leak-free fit.
  • Decorative hanging basket with perching rings allows hummingbirds to perch for more comfortable feeding.
  • All parts easily remove and are dishwasher safe for easy cleaning.
Check Stock

Assault Racing Products A8493 GM 700R4 4L60E Polished Aluminum Transmission Pan Kit Gasket Bolts

  • Stainless steel allen head bolts and gasket included.
  • Thick pan rail to resist warpage and provide a positive seal.
Check Stock

(2) Gasket for Mirro S-9892 Pressure Cooker Replacement 4, 6 and 8 QT Models by TacPower

  • Please Note: Mirro no longer manufacturers these gaskets. These are one of the only replacement gaskets on the market for the S-9892. They may differ slightly in thickness from the original gasket and may fit specific models better than others..
  • Each gasket will have ‘9892’ printed on the rubber.
  • Fits Mirro models (may be partial list): M-0296, M-0436, M-0498, M-0536, M-0596, M-0598, M-0646, M-1952, M-1956 (Includes models with -11, -35, etc. such as M-0536-11).
  • Outside Diameter (OD): 10-3/4″ Inside Diameter (ID): 9-3/4″ Thickness: 5/16″.
  • Includes two (2) gasket seals as pictured.
Check Stock

6 Fins Extractor Blades Replacement Part for Ninja Blender fit for Nutri Ninja Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz 32 oz (1)

  • ✅NUTR# NINJIA 6 FIN Blade for Nutri Ninja Blender ONLY FITS models:900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
  • ✅Package Include: 1 x 6 Fins Extractor Bottom Blade Replacements for Ninja series Models(Each has Gasket Rubbers), 1 x Extra Gasket Rubbers(Extra gift)..
  • ✅【Note Tips】Tip1:The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade. Tip2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket..
  • ✅Safe and high quality:The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable food-grade PP material, not easy to break and scrape..
  • ✅Statement:The blades replacement 6 fins for ninja we sell is not an original product. Design and production are in line with original standards. It can functionally reach the same level as the original.
Check Stock