ReviewsExtreme pressure Transmission Fluid

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
pumping is only required to build additional pressure..
The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..

Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..

Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..

Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....

Check Stock

Power Up HydraMaxx Hydraulic Fluid Additive 1 Quart Bottle

Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures..
Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water..
Pour Point Depressants: Reduce the pour point and improve flow at low temperatures..
Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants..
Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions..

Check Stock

Mityvac MV6412 ATF Pneumatic Refill System; Air Operated, Services Sealed Automatic Transmissions with up to 2.5 Gallons of Fluid; Includes Quick-Change Style Accessory Connections

EASY OPERATION: Transmission Fluid is dispensed under pressure by pressurizing the reservoir with the built in hand pump for smooth continual flow. ON/OFF and flow control valve are conveniently located near fluid output..
ACCESSORIES: Includes ten (10) adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions..
PRESSURE GAUGE: Integrated Pressure gauge indicates fluid dispensing pressure..
NO TOOLS NEEDED: The MV6412 utilizes push-to-connect, quick-change style accessory connections..
SOLID CONSTRUCTION: Internal pump components are sealed against exposure to fluids. This ATF refill system includes a custom-molded storage case for easy and safe storage of adapters..

Check Stock

Thorstone Automotive Fluid Extractor Pump 500cc

TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.

Check Stock

9L2Z7G391A Automatic Transmission Control Solenoid Pack Assembly Fits for Ford Explorer 2003-2010 Mustang 05-10 Thunderbird 04-05 Mercury Mountaineer 03-10 Lincoln Aviator 03-05 LS 04-06 5R55S 5R55W

Transmission solenoids are one of your automatic transmission’s many critical components. A transmission solenoid is an electro-mechanical component “valve” used to control the flow of transmission fluid in the transmission, and they open and close as per the electrical signals they receive from your vehicle’s engine or transmission control unit, which pulls its data from a series of speed sensors in the engine..
Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. If one of these electro-mechanical valves fail, then all sorts of transmission problems can ensue..
This Automatic Transmission Control Solenoid Fits For the Following Vehicles: 2003-2010 Ford Explorer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L.
2007-2010 Ford Explorer Sport Trac 6 Cyl 4.0L , 8 Cyl 4.6L.
2005-2010 Ford Mustang 6 Cyl 4.0 , 8 Cyl 4.6L, 8 Cyl 5.4L.
2004-2006 Lincoln LS 6 Cyl 3.0L, 8 Cyl 3.9L.
2003-2010 Mercury Mountaineer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L..
Customers can find the product you need accurat....

Check Stock

Amalie 160-62836-56 Ford Type F ATF Trans

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

Check Stock

Lisle 38780 22' Square No-Splatter Pad

22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
Porous material allows fluid to quickly pass through into funnel or pan..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..

Check Stock