ReviewsExtruder Screen

Kywoo Tycoon Slim 3D Printer with Auto Leveling Direct Drive Extruder Resume Printing Function and Dual Z-axis Linear Rail Silent Motherboard Touch Screen Printing Size 9.4x9.4x11.8 inch

【Excellent performance】 Kywoo Tycoon Slim features a linear X-axis guide design, dual Z-axes and gantry frame for 30% more accuracy compared to....
【Automatic leveling sensor and 32-bit motherboard with silent TMC 2209】. Kywoo Touch, developed in-house, is user-friendly, smart and time-saving.....
【Integrated Extruder Kit and Direct Drive Extrusion】With the direct drive extruder, Tycoon Slim 3D printer provides smooth feeding, which is....
【Smart Filament Sensor and HD Touch Screen】Whenever there is a possibility of an incident such as filament leakage or breakage, the smart sensor....
【Safe and stable power supply and warranty】350W switching power supply better protects your prints from short circuit, overload voltage or low....

Check Stock

FlashForge Creator Max Dual Extruder 3D Printer 3D-FFG-CMAX

Enclosed Printing Chamber - Retain Printing Chamber Temperature.
Full LED Touch Screen Interface for Easy Operation.
Build Plate - Provides Flat and Smooth Printing Surface with Use of Industrial Grade Metal.
Dual Extruder Printing for 2-Color or 2-Material Models.

Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
“SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..

Check Stock

Raise3D 101016001 Pro2 3D Printer Dual Extruder Fully Enclosed

Dual Extruder Electronic driven lifting 4× increased torque performance Diverse Filament Compatibility (300℃).
Huge Build Volume (12*12*11 8 in) Minimum 0 01mm Layer Height.
7" Touch Screen Resume Print after Power Outage Wireless Compatibility.

Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
【Advantage】A direct drive extruder improves extrusion and retraction.
【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
【Filament】More material options,easy to print TPU flexible filament.
【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.

Check Stock

Shimpo Handheld Extruder

Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
Hollow die set available Product number: H-EXTRD-HDS.
The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.

Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

...0℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing..
“Sprite” All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user frien....

Check Stock

Raise3D 101017001 Pro2 Plus 3D Printer Dual Extruder Fully Enclosed

Dual extruder: electronic driven lifting.
Massive build volume (12 x 12 x 23. 8 in).

Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
All metal frame body with stable structure.
Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....

Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
100% brand new and original Creality exturder. If you have any question, please feel free to contact us..

Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).

Check Stock