ReviewsF type Terminators

Kiln Oven Furnace Digital Pyrometer F,C for Pottery Ceramic Glass fusing Annealing PMC Metal Clay Beads Enameling Forges Sensor Probe Thermometer Thermocouple 2372 Fahrenheit

Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer.
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Ceramic Thermocouple ( -58°F to 2372°F)....
Shipping to USA is 3-6 business days. For more information please go to our website Thermomart.

Check Stock

Kiln Oven Furnace Digital Pyrometer F,C+ Ceramic Protection Tube for Pottery Ceramic Glass fusing Annealing PMC Metal Clay Beads Enameling Forges Sensor Probe Thermometer Thermocouple 2372 Fahrenheit

Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer.
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit..
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Package Includes: Didital Pyrometer+ 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Ceramic....
Shipping to USA is 3-6 business days. Ceramic Protection tube specification :Temperature Resistance Up to 2372 °F (1300 °C) Diameter (ɸ) Inside....

Check Stock

Traceable 4-Input Data Logging Thermocouple Probe Thermometer, Type K/J

Temp range: Type K: -328 to 2501°f (-200 to 1372°c) Type J: -346 to 2012°f (-210 to 1100°c).

Check Stock

SWM

Technical Information - Frequency Range - 2000 kHz to 2150 MHz.
Input Voltage Range - 100 V AC to 120 V AC.

Check Stock

Superbat FM Telescopic Antenna Kit 75 Unbal F Type Connector DAB Radio Replacement Antenna for TV AM FM Radio Stereo Receiver Bose Wave Radio etc.

Type: 75 Ohm FM Dipole indoor antenna with type F connector to enhances FM stereo reception.
Length:13.5CM / 5.3" included "F" connector ,Extend length:51CM / 5.3" included "F" connector ,Material: Steel, Brass.
Installation: F type male connctor easy for install Simply screw in it to the intended female connctor antenna connection | Stretch the end of the antenna as far as possible away from the device for the best reception..
Application: Fit for FM Radio / DAB / AV Receiver,like Tivoli Audio Sangean WR-11,Sangean WR-2,Sangean WR-12 ,Harmon Kardon Musicsystem radio,SONY, YAMAHA, DENON, TEAC, PIONEER, Panasonic, ONKYO, MARANTZ, SANSUI,Sangean WR-15WL,WR-11SE, WR 22WL,HDR-18, ect.
Package include: 1pcs telescopic antenna + 1pcs F female to PAL male connector + 1pcs F female to PAL female connector + 1pcs F female to 3.5mm connector.

Check Stock

ANHAN F Type Female Splitter F Female to Female Connectors 3 Way F Type Female Satellite TV Signal Splitter RF Coax Coaxial Cable Adapters for TV Video Antenna 2Packs

Type: F Female Connector ,Satellite TV F type splitter,tv signal splitter,F female to female connectors adapters.
F connector splitter Allows 2 units to be operated from one source like cable television (CATV), VCR, DVD, HD-TV, Satellite receiver, cable box, or antenna into multiple outgoing signals,and all other home theater audio/video equipment..
F female Antenna connector designed to split a single coax cable such as cable television, satillite receiver etc. into multiple signals..
F type female connector adapter easy to assemble and disassemble,High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
F female to female coax connector gold plating resists corrosion and provides rigidity.

Check Stock

wlaniot F Type Adapter，F Female to F Female Bulkhead Connector 2pcs F Type Coax Barrel Connector for Video Cables

Type: F female to F Female Bulkhead Adapter Coax Barrel Connector ..
Impedance: 75 Ohm | Material:Brass Plating:Nickel-plated | Features:Bulkhead and High Frequency.
Application: Antennas, RG6 F Type male Coaxial cables, satellite box , TV Antennas, video cable adapter, cable box fm antenna etc..
Accommodates most Male F-type connectors and wall plates for indoor and outdoor settings alike..
Package Contents:2 Pcs F female to female coax connectors.
Never worry about any security problems. We are confident in the quality of our connector and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..

Check Stock

Antronix High Performance 8-Way Cable TV Splitter CMC2008U OTA Coaxial 5-1002M

Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards..
6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)..
3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
PTC Short-Circuit Protected UL Listed Adaptor – Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators..

Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.

Check Stock

WELLBOB 6GTPY Battery for Dell XPS 15 9550 9560 9570 Battery Fit for Dell Precision 5510 5520 5540 Battery, XPS 17 9700, Precision 17 5750 6GTPY XG4K6 4GVGH Battery with Warranty,6 Cell 97Wh

[ 97Wh 6GTPY Dell Battery ] - Type: Lithium polymer, Voltage: 11.4V, Capacity: 97Wh,Cell:6-cell.
Check Your Battery and Dell Model First Before Purchasing to Avoid Buying Mistakes..
[ Battery Type Which printed on the battery ]- XG4K6 6GTPY 5XJ28 GPM03 4GVGH 06GTPY HZV0VN2.
[ For Dell Laptop Model ] for Dell XPS 15 9550 9560 9570 7590,XPS 17 9700 9710, for Dell Precision 5510 5520 5540 5750 5760, for Inspiron 15 7500 7590, G7 17 7700.Reg Type No:P56F001,P56F002,P56F003,P92F001,P92F002 P46E001,P102F003, P83F001.
[WELLBOB] We are a professional battery manufacturer with 10 years of experience and we have been doing our best to meet customer needs..

Check Stock

300 Pcs 4x8.5mm Folding Crimp Cord Ropes Ends Tips Terminators for Leather DIY Necklace Bracelet,Metal Fold Over Cord Ending Clasp Jewelry Making Connector Silver

★ Used to cover the knots on the end of beaded necklaces or bracelets to join to a clasp,these mini fold over crimp ends are handy for finishing your cord..
★【Size】:4x8.5mm.Made of high quality metal material,durable and long service life..
★ You can use to finish leather and other fibers.The sides can be folded over or crimped,around the back of your stringing material..
★ Perfect for leather,silk and satin cord necklaces,simply laying the trimmed end of the cord in the metal crimp end,and folding down and flattening one side..
★【Package content】:300 Pcs Fold Over Cord Ends Terminators Crimp End Tips.Color:Silver..

Check Stock