ReviewsF152wd Lift Kit

2009-2016 Dodge Ram 1500 5.7 Hemi 2WD MaxTrac Suspension 7" Lift Kit w/Shocks

The hemi kit comes with the following: PN# 702145 4.5" Lift spindles with extended DOT approved brake lines. PN# 872171 2.5" Front Lift Coils, PN# 902430 3" Rear Lift Coils, Track & Sway Bar Brackets & MAXTRAC Shocks..
This kit is for the 5.7 hemi RAM Part# 612400 required for vehicles with 2 piece driveshaft ,Wheel & Tire Fitment: Will clear up to a 37" tires with the correct wheel & tire combination. 17" wheel or larger with 5.5" backspace or less. This kit will allow factory wheels & tires to bolt back on..

Check Stock

Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit for 2007-2019 Chevy Silverado/GMC Sierra 1500 2WD/4WD - Full Suspension Lift Kit with Rear Shock Mount Extenders (Black)

... Center Pin. This kit is NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System..
NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks..
TECHNICAL NOTES: 3.5 inch front and 3 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. IMPORTANT NOTE: Installation of Aftermarket Uniball UCA is highly recommended after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA..
HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy 2-4 hour installation* process, you're ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of y....

Check Stock

AKM F150 Lift Kit 3' Front and 2' Rear Leveling Lift Kit for 2004-2022 Ford F150 4WD 2WD

WARM TIP: This set will raise the front of the truck by 3″ and the rear of the truck by 2″. Suitable for for 2004-2022 Ford F150 4WD 2WD.（The label on some products may not be updated in time,the product is applicable to the F150 mentioned above）.
HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable..
EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2″, the height of the car front lift is 3″, the thickness of the rear lift block is 3″, but the height of the car rear lift is 2″.Because the lifting height and kit thickness are not 1:1..
ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level..
PRODUCTS INCLUDE: 3″Front lift spacers x2,2″Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you..

Check Stock

KAX 2" Front Leveling Lift Kit Fit for Ram 2500 4WD 1994-2013, 2 inch Front Leveling Kit for 1994-2012 Ram 3500 4WD, Leveling Kit for Ram 1500 1994-2001 2003-2008, Suspensions Spacer LLK016

Vehicle Specific: the leveling kits fit for Ram 2500 4wd 1994-2013 Ram 3500 4wd 1994-2012 and Ram 1500 1994-2001 2003-2008..
Looks more aggressive : This kit improves the look of your vehicle by lifting the front of your truck to even out the overall body of the vehicle. It can be helpful to go off road or to a snowplow or trailer..
Increases ground clearance: After installing our 2" leveling kit, your tires will no longer be rubbed. It allows you to fit larger custom rims and tires and you will get MORE Comfortable Riding Experience..
Rust and corrosion resistance: Leveling kit is made of the same material as the aircraft, CNC machined out of billet aluminum, T6 treated and 12.9 Grade premium bolts, powdercoated black. It can cope with Harsh Environments..
NOTE: The ratio between lift height and kit thickness is not 1:1, because of suspension geometry. The thickness of front lift kits is less than 2", but the leveling kits will actually raise the truck by 2"..

Check Stock

Supreme Suspensions - Full Lift Kit for 1993-1998 Jeep Grand Cherokee ZJ 3" Front + 3" Rear Suspension Lift Kit - High-Density Delrin Lift Spacers - Can Cooler Included with Purchase

COMPATIBLE WITH 1993 - 1998 Jeep Grand Cherokee ZJ (2WD 4WD)..
CONTENTS: (4x) Front and Rear High-Density Delrin Coil Spring Lift Spacers, Installation Instructions, Supreme Suspensions Pro Pack and one Premium Neoprene Can Cooler.
TECHNICAL NOTES: 3 inch front and 3 inch rear lift..
BENEFITS: Improves the look of your Jeep and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy installation process, you're ready to feature your new and improved ride! No special tools are required to mount these bolt-on lift spacers..
PREMIUM CAN COOZIE: Included with purchase is one Supreme Suspensions Waterproof Can Cooler designed with 3mm neoprene to keep your beverage perfectly chilled while tackling your DIY lift kit install..

Check Stock

MZS 3.5 Front Leveling Lift Kit [upper+lower] Strut Spacers Compatible with 2007-2020 Tahoe Yukon Avalanche/Silverado/Sierra/Suburban 1500 2WD 4WD

Will raise the front 3.5" by a true,but spacer thickness is less than lift height..
MZS Leveling Lift Kit are CNC machined out of billet aluminum,strong & anti-rust.Easy bolt-on installation,no special tools are required..
Improve the stance of your vehicle and provide additional fender clearance for larger tires and wheels..
A front end alignment back to factory spec is recommend after install..
Compatible with Tahoe,Yukon,Avalanche 1500,Silverado 1500,Sierra 1500,Suburban 1500 2WD 4WD..

Check Stock

Dynofit 2.5 In Front Leveling Lift Kits for 2004-2021 F150 XLT FX4 Lariat etc 4x4 2WD, 2.5' Raise F-150 Strut Spacers 4WD 2WD, 03 - 18 Expedition, 05-08 Lincoln Mark LT Suspension Lifts

2005-2008 Lincoln Mark LT, read the listing carefully!.
2.5″ raise leveling kit: when you receive it it’s gonna be 1.6″ of thickness but will lift 2.5 inch(lever principle).
Performance and off-road functionality: keep stance and give the truck aggressive look, solving rubbing.
Easy installation: bolts on top of the strut assembly and nothing complicated, more easy with second person.
Package: 2 x forged lift kit with parts in padding box separated! instruction included! nice powder coated billet aluminum and 10.9 bolts.

Check Stock

Liftcraft - Fits Jeep Grand Cherokee ZJ Lift Kit | 2 Inch Front 2 Inch Rear Delrin® Spring Spacers 2WD 4WD

LIFT: 2 inch front and 2 inch rear llift over stock.
FITMENT: For 1993 - 1998 Jeep Grand Cherokee ZJ 2WD 4WD Models.
MATERIAL: DELRIN engineered construction for high stiffness, low friction and excellent dimensional stability.
INSTALLATION: Bolt-on kit, only takes a few hours to install. Once lifted, we do recommend getting an alignment to ensure your ride quality..
CONTENTS: Front Delrin Spring Spacers (2), Rear Delrin Spring Spacers (2) and Detailed Instructions - Liftcraft suspension lift and leveling kits are designed to offer a safe and easy way to improve the look of your truck and run larger-diameter wheels and tires without compromising your vehicle's ride quality..

Check Stock

Supreme Suspensions - 2.5" Front Leveling Kit for 1994-2013 Dodge Ram 2500 3500 and 1994-2001 Dodge Ram 1500 High-Strength Steel Spring Spacers Lift Kit 4WD

COMPATIBLE WITH 1994 - 2001 Dodge Ram 1500 4WD, 1994 - 2013 Dodge Ram 2500 4WD and 1994 - 2012 Dodge Ram 3500 4WD. *Does NOT Fit Ram 1500 Mega Cab or Extended Cab models..
TECHNICAL NOTES: 2.5 Inch Front Suspension Lift. *An alignment is always recommended after altering the height of your vehicle. **Compressing your springs can be VERY dangerous. For a safe installation process we recommend using a Coil Spring Compressor Tool..
HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
BOLT-ON INSTALLATION: After an easy 1-2 hour installation process*, you are ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle..
LIMITED LIFETIME WARRANTY: All Supreme Suspensions brand products have been thoroughly tested before market release and are backed by or Limited Lifetime Warranty..

Check Stock

TORCH 3″ Front Leveling Lift Kit for 1995-2004 Toyota Tacoma 2WD 4WD TRD SR5 – Models with 6 Lugs (wheel lug) ONLY

FITS: 1995.5-2004 Toyota Tacoma 2WD 4WD TRD SR5 (6 LUG MODELS ONLY – will NOT fit 5 lug models).
CONTENTS: 3″ Front Lift Strut Spacers with Hardware.
INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
Ships Same/Next Business Day. 2-3 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
NOTES: Front Strut Spacers will generate 3″ of Lift, it is NOT a 3″ thick spacer. Will NOT fit 5 Lug models or 1995 models with production date between 01/95 and 06/95. Please message us if you have any questions..

Check Stock

3″F + 2″R Leveling Lift Kit for 2005-2021 Tacoma, 3″ Front Strut Spacers and 2″ Rear Black Leveling Lift Block Kit Extended Square U-Bolts, 3″+2″ Height for 2005-2021 Tacoma 2WD/4WD

✫NOTE: 12.9 grades the leaf springs U-Bolts is Longer than original bolts and the thread pitch is 9/16-18, which is more suitable for the higher block on the tuner..
✫Compatible with: 2005-2021 Tacoma 2WD 4WD (6 lugs only).The thickness of the front leveling Lift Kit is 1.5″, it will raise the front of your Pickup by 3″. This is due to suspension geometry, the ratio of the lifting height to the thickness of the lift kit is not 1:1..
✫ BENEFITS: (I) CNC automatic processing ensure high accuracy and stability(0.02mm) (II)6061-T6 aluminum forged alloymaterial. (III)High quality pre-installed heat treated 12.9 grade studs.(IV)The Cross Gusset Plate Locked design of the rear lift block, ensuring stronger support than others..
✫ Easy Install: Installation can be completed within 1-2 hours and does not require strut/coil disassembly like other kits..
✫ PRODUCT WARRANTY：All Richeer products are covered by the Richeer two year warranty to be free of defects in material and workmanship for two years from date purchased. If you have any questions or you are not satisfied with the product, welcome to contact us..

Check Stock