ReviewsFabric Stores Pei

Pair of SoundXtreme 6' in 3-Way 350 Watts Coaxial Car Audio Speaker CEA Rated (2 Speakers)

  • New 2x SoundXtreme ST-603 6" 3-Way 350W pei dome tweeter coaxial car audio speakers.
  • Product specification: peak power rating: 320 watts power/ frequency response: 55-20, 000/ Hz sensitivity: 89 dB/ Impedance: 4 ohm.
  • Polypropylene woofer gives amazing bass and mid's/ flex motion rubber surround.
  • 30mm pei dome tweeter with magnet give amazing highs 0. 6” Super tweeter/ steel high quality basket/ rubber magnet boot cover.
  • Package Contents: 1 * SX ST-603 speakers/ 1 * speaker wire/ 1 * screws/ 1 * User Manual.
Check Stock

Pair of SoundXtreme 4x6 in 3-Way 220 Watts Coaxial Car Speakers CEA Rated 2 Speakers

  • New SoundXtreme 4x6" 3-Way 220 watts coaxial car speakers CEA rated (pair).
  • Product specification: Power handling - Peak: 220 watts per pair/ recommended power range: 10 - 50 watts RMS per Channel.
  • 4 ohms impedance/ Frequency response: 60 - 20, 000 Hz/ sensitivity: 88dB/ 1/2" Poly-ether Imide (pei) balanced dome tweeter.
  • Polypropylene mid-woofer Cone Material/ polyester foam speaker surround/ 1/2" Poly-ether Imide (pei) balanced dome tweeter.
  • Package Contents: 1 * SX ST-460 speakers/ 1 * speaker wire/ 1 * screws/ 1 * User Manual.
Check Stock

Memphis Audio PRX3 Power Reference Series 3 Inch 15 Watt RMS 30 Watt Peak Power Car Audio Coaxial Speaker System

  • MULTI-DIRECTIONAL: Upgrade your audio system to this high-performance multi-directional 3-inch speaker system.
  • POWERFUL PERFORMANCE: Powerful peak performance offers reliable service at 30 watts and 15 watt RMS.
  • PEI DOME TWEETER: Equipped with PEI dome tweeter to offer wider dispersion pattern.
  • ADDED PROTECTION: Polyuerthane surround adds protection to speakers.
  • AUDIO UPGRADE: Perfect solution for most vehicles looking for a solid audio upgrade.
Check Stock

Memphis Audio PRX46 Power Reference 4 x 6 Inch 30 Watt RMS 60 Watt Peak Power 2 Way Coaxial Car Speaker System

  • MULTI-DIRECTIONAL: Upgrade your audio system to this high-performance multi-directional 4-inch by 6-inch speakers.
  • POWERFUL PERFORMANCE: Powerful peak performance offers reliable service at 100 watts and 30 watt RMS.
  • PEI DOME TWEETER: Equipped with PEI dome tweeter to offer wider dispersion pattern.
  • ADDED PROTECTION: Polyuerthane surround adds protection to speakers.
  • AUDIO UPGRADE: Perfect solution for most vehicles looking for a solid audio upgrade.
Check Stock

Memphis Audio PRX410 Power Reference 4x10 Inch 50 Watt RMS 100 Watt Peak Power 2 Way Coaxial Car Speaker System

  • MULTI-DIRECTIONAL: Upgrade your audio system to this high-performance multi-directional 4-inch by 10-inch speakers.
  • POWERFUL PERFORMANCE: Powerful peak performance offers reliable service at 100 watts and 50 watt RMS.
  • PEI DOME TWEETER: Equipped with PEI dome tweeter to offer wider dispersion pattern.
  • ADDED PROTECTION: Polyuerthane surround adds protection to speakers.
  • AUDIO UPGRADE: Perfect solution for most vehicles looking for a solid audio upgrade.
Check Stock

Pair of Rockford Fosgate Punch P1694 6' X 9' 300W 4-Way + P1650 6.5' 220W 2-Way Full Range Coaxial Speakers - 4 Speakers

  • P1694 6″ X 9″ 4-Way | P1650 6.5″ 2-Way.
  • P1694: peak: 300 watts per pair/ 150 watts each RMS: 150 watts per pair/ 75 watts each.
  • P1650: peak: 220 watts per pair/ 110 watts each RMS: 110 watts per pair/ 55 watts each.
  • P1694: two 1/2″ Pei dome tweeters with built-in 3-way Crossover.
  • P1650: santoprene rubber Surround with 3/4″ Pei dome tweeter | gravity phone holder magnet.
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12\ x 12\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 10\ x 10\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

KICKER 46KMC3 Marine-Grade Stereo Receiver with Built-in Amplifier

  • 6.5-INCH COAXIAL SPEAKER PAIR: The pair of Kicker CS Series 6.5 Inch 4 Ohm 2-Way Car Audio Coaxial Speaker System are made to fit most cars and give you remarkable performance with ultra clear bass.
  • PERFORMANCE FEATURES: 300 Watt MAX100-watt RMS power.
  • EVC technology improves woofer performance.
  • PEI DOME TWEETERS: Includes 0.5-inch PEI dome tweeters for rich sound detail and large neodymium tweeter magnets ramp up the volume at high frequencies.
  • POLYPROPYLENE CONE: Features polypropylene cones and ribbed, UV-treated polyester woofer surround that resists heat and sunlight.
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 8" x 8" (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Sundown Audio SA-2.75 FR V2 Ferrite 2.75' Car Dash Speakers Mid Tweeters New

  • 4x6-INCH COAXIAL SPEAKER PAIR: The pair of Kicker CS Series 4 x 6 Inch 4 Ohm 2-Way Car Audio Coaxial Speaker System are made to fit most cars and give you remarkable performance with ultra clear bass.
  • 150 WATT POWER: 150 Watts MAX 50 Watts RMS power.
  • EVC technology improves woofer performance a.
  • PEI DOME TWEETERS: Includes 0.5-inch PEI dome tweeters for rich sound detail and large neodymium tweeter magnets ramp up the volume at high frequencies.
  • POLYPROPYLENE CONE: Features polypropylene cones and ribbed, UV-treated polyester woofer surround that resists heat and sunlight.
  • SPECIFICATIONS: 88 dB sensitivity and 50 to 20,000 Hz frequency response.
Check Stock