ReviewsFabricated Tube

Schluter Kerdi Shower Kit 38” x 60” Center Shower Tray (KSK965/1525) with 2” PVC Bonding Flange, Strainer, Joint Sealant and 4” Stainless Steel Chrome Grate

  • SHOWER TRAY: the pre sloped shower tray KST965/1525 (38 Inch x 60 Inch) is machine fabricated to ensure proper water drainage.
  • KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed..
  • WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz).
  • EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high-density polymer. The material is lightweight and trimmable to achieve the desired shower base size..
  • WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual..
Check Stock

Schluter Kerdi Shower Kit 38” x 60” Offset Shower Tray (KST965/1525S) with 2” PVC Bonding Flange, Strainer, Joint Sealant and 4” Brushed Nickel Grate

  • SHOWER TRAY: the pre sloped shower tray KST965/1525S (38 Inch x 60 Inch) Offset is machine fabricated to ensure proper water drainage.
  • KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed..
  • WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz).
  • EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high-density polymer. The material is lightweight and trimmable to achieve the desired shower base size..
  • WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual..
Check Stock

Corning Pyrex 99445-16 Borosilicate Glass Round Bottom 15mL Disposable Rimless Culture Tube, 16mm OD x 100mm Height, Clear (Case of 1000)

  • PYREX 20mL Reusable screw cap culture tube with a PTFE lined phenolic cap.
  • Caps fabricated from special formula resistant to effects of temperature and steam in autoclaving.
  • PTFEinterface firmly bonded to glued-in rubber liner provides sure and highly inert sealing face.
  • White enamel marking spot for pencil notations.
Check Stock

Corning Pyrex 99445-13 Borosilicate Glass Round Bottom 10mL Disposable Rimless Culture Tube, 13mm OD x 100mm Height, Clear (Case of 1000)

  • PYREX 11mL Reusable screw cap culture tube with a PTFE lined phenolic cap.
  • Caps fabricated from special formula resistant to effects of temperature and steam in autoclaving.
  • PTFEinterface firmly bonded to glued-in rubber liner provides sure and highly inert sealing face.
  • White enamel marking spot for pencil notations.
  • For replacement caps see part Number 9998.
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Speedway Motors Speedy Notcher Roll Cage Tube Joint Tubing Notcher with Instructions, Built-In Protractor Gauge with Degree Angle, Premium Holesaw Blade

  • Fantastic tool and is a ‘must have’ for making custom fabricated tube chassis, roll cages and header/exhaust work.
  • Works well with 9/16" to 2" O.D. tubing, useful in joining different sized tubing.
  • Ideal for anything that you need to put an angle onto the end of either round or square tubing for tight notches and perfect fit.
  • Incorporates and includes a built-in protractor gauge to quickly and easily set the degree angle of the tubing where end matches up to mating tubing.
  • Takes the challenges and difficulty out of making 40° to 90° angled tubing joints and makes angled tubing joints quickly and accurately.
Check Stock

Vacuum Reservoir Tank, with Hardware (Texture Black Steel)

  • Fabricated of strong lightweight aluminum.
  • Includes mounting hardware brackets and fittings.
  • Improves power brake vacuum due to performance cam shaft.
Check Stock

ReadyLift 66-5075 Toyota Tundra Front Leveling Suspension - Strut Extension

  • Includes one pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
  • Max Lift 2. 4 in. - Max Tire Diameter 33 in..
  • Not for use on 2015-2017 Tundra TRD Pro w/ Bilstein shocks.
  • One pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
Check Stock

Moroso 97340 Valve Cover Breather Grommets, Pair

  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1.220" diameter hole.
  • Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1. 220" diameter hole Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
Check Stock

CHALA Large Bowling Tote Bag with coin purse Stone Gray Dragonfly - Gray

  • - Material: High Quality Vegan leather- Fabricated flower & metal button details..
  • - Comes with a detachable Animal keyfob/coin purse..
  • - Dimensions: 12" x 16.5" x 7". Handle drop 9.5 inch.
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Silver

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock