ReviewsFace Grooving Tools

THINBIT 3 Pack SGI040D2 0.040\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

OSCARBIDE 3/8\x1/2\Indexable Grooving Parting Holder Nickel Plated Heavy Duty QA06R-20J Right -Hand Lathe Cut Off Tool with GTN-2 Carbide Insert, 1pcs

  • Size：Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

THINBIT 3 Pack SGI039D5 0.039\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

THINBIT 3 Pack SGI012D2FR 0.012\ Width 0.036\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .036" deep. Can also be used for parting stock up to .072"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI062D2FR 0.062\ Width 0.100\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI029D5E 0.029\ Width 0.087\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel and Stainless Steel Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .087" deep. Can also be used for parting stock up to .174"..
  • TiAlN Coated DURA-MAX 5000 carbide grooving insert for steel, titanium, nickel and stainless steel without interrupted cuts..
Check Stock

OSCARBIDE 3/8\x1/2\ Indexable Lathe Parting Grooving Holder with 10 Pieces GTN-2(QC1402) Carbide Inserts Heavy Duty Nickel Plated QA06R-20J Right -Hand Cut Off Tool

  • Size：Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

THINBIT 3 Pack LGT062D5RFR 0.062\ Width 0.155\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .155" deep. Can be used for parting stock up to .310". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock