ReviewsFan Clutch Tool

ARES 15027- Cooling System Refill Kit - Easily Test for Leakage in Cooling System - Change Coolant Quickly - Works with Most Radiator and Coolant Bottlenecks

  • Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan.
  • Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench.
  • If you need to remove the reverse threaded fan,this fan clutch wrench Worked great, made the job of replacing the radiator so much easier..
  • This 2-Piece Fan Clutch Wrench Set is a necessary option if you are going to remove your thermostat or water puimp. Cut my job in more than half the time without it. I recommend that anyone this job needs this tool and the combo set makes it a brainier.
Check Stock

Schwaben 003466SCH01 Coolant Refill/Air Purge Tool

  • Lock it onto the waterpump face and use 32mm or 36 mm (both included) spanner to undo the nut..
  • Fan Clutch Holder fits BMW engine models : M10,M20 ,M30,M40, M44,M50,M52,M52TU,M54,M56,M60, M70,M73, S14, S38, S50B30, S50B32, S54..
  • When performing cooling jobs or any job that involves removal of the viscous fan, this tool will save you a lot of time..
Check Stock

Powerbuilt Fan Clutch Wrench Master Kit, 10 Piece, Remove, Wrenches Loosen Fan Clutches, Ford, Chrysler, GM, Imports, Storage Case - 648651

  • Made to be the most reliable tools in the market today.
  • Tool set for removing threaded-on viscous fan clutches.
  • Includes smaller spanner-type wrenches for engaging the hex nut on the fan clutch.
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

Magacyo 8pcs Fan Clutch Removal Tool - Pneumatic Fan Clutch Tool Kit Compatible with Jeep, Ford, GM, Chrysler

  • Function: Insert the tool into the air hammer with the correct wrench size for the fan nut and activate the air hammer , then the fan clutch will be loosed.(Note: Air Hammer is NOT included).
  • Adapter Models: Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Kindly note: please make sure the size you need before purchase).
  • Size: 7pcs Fan Clutch Wrench include 7/8", 1-7/8", 2", 32mm, 36mm, 40mm thin, and 47mm..
  • Material: Made of sturdy steel, ensures high strength and durability, great resistance to corrosion and rust..
  • Package Box: High quality blow molded storage case, convenient for storage..
Check Stock

Electric Engine Cooling Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Chevy GMC Envoy L6 V8 Replace#3201

  • Electronic Electric Engine Cooling Fan Clutch Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Chevy Trailblazer GMC Envoy.
  • For 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Fan Clutch Replace#3201.
  • Engine Cooling Fan Clutch Radiator Fan Clutch for Chevy Trailblazer GMC Envoy L6 V8 4.2L 6L.
  • Meets OE standard quality and performance requirements..
  • Please CONFIRM FITMENT before purchase(Check Date Above), 1 Year WARRANTY !.
  • If not fit, we accept return, please keep the package clean and products in good condition.
Check Stock

Dual Clutch Transmission Remover Installer Tool Compatible with Ford Focus, DCT Dual Clutch Transmission Reinstall Reset Tool Set for Reuse DCT F1FZ-7B546-B, Clutch Transmission Tools Accessories

  • 【Dual Clutch Transmission Tool with Good Compatibility】The dual clutch transmission remover installer tool is made of heavy-duty steel, which is corrosion-resistant and high in hardness. Perfectly compatible with Ford Focus DCT dual-clutch transmission DPS6..
  • 【Professional Dual Clutch Transmission Tool】Reuse the removed/previously installed dual-clutch assembly. It resprings/re-trips the springs on the clutch so that the user can reinstall it..
  • 【Durable Dual Clutch Transmission Tool】The surface of the dual-clutch transmission remover installer tool is specially phosphated, which not only prevents rust, but also has a longer service life. With this tool, you will not need to purchase any new DCT clutch components..
  • 【How to Use the Dual Clutch Transmission Tool】Install the special tool and press the input shaft tightly. After the threaded bar is in contact with the input shaft, it rotates 20 times..
  • 【All-In-One DCT Tool Set】The dual-clutch transmission tool is equipped with a toolbox, which is very convenient for product organization and storage. If you have any q....
Check Stock

Radiator Cooling Fan Clutch for BMW 3 5 M Z3 E36 E46 E53 E34 Series e39 528i 525i 530i 338 728i 728il x5 328i 325i 323i 320i 520i Fan Clutch 11527505302

  • ★ This part is compatible to: 11521719269, 11527505302, E9738,376732111, LK011, 2100 011 031, 2100011031.
  • ★ GOOD QUALITY-Directly replace OEM components BMW fan clutch and will fit exactly for easy installation..
  • ★ Fitment: BMW fan clutch,325i bmw fan clutch,bmw x5 fan clutch,bmw e46 fan clutch.
  • ★ ★ 2 YEAR WARRANTY:We offer 2 year warranty and lifetime support..
Check Stock

GEARWRENCH Fan Clutch Service Set |Fan Nut Wrenches|Pully Holder|Blow Mold Case| - 41580D

  • Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys.
  • Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing.
  • Features the patented universal PULLEY holder.
  • Fan nut wrenches included: 22mm, 36mm, 40mm, 50mm, & diesel.
  • Durable blow mold case for tool retention.
Check Stock

Lisle 43300 Pneumatic Fan Clutch Wrench

  • Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
  • Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L....
  • Use with an air hammer. Includes blow molded storage case..
Check Stock

Electronic Radiator Fan Clutch - with Harness - Fits Chevy Trailblazer 2002-2009, EXT, GMC Envoy, Buick Rainier, Isuzu Ascender, Bravada, Saab 9-7x - Replaces 25790869, 622-001, 15-40133, 15293048

  • REPLACeMENT ELECTRIC FAN CLUTCH WITH HARNESS – Keeps the engine cool as it operates. It is also an essential part of the whole vehicle cooling system including the air conditioning system as it also cools the radiator and the freon flowing from the AC compressor. The fan clutch is driven by the power from the engine and only engages when needed..
  • FITS THE FOLLOWING VEHICLES – 2004 – 2007 Buick Rainier | 2002 – 2009 Chevrolet Trailblazer | 2002 – 2006 Chevrolet Trailblazer EXT | 2002 – 2009 GMC Envoy | 2002 – 2006 GMC Envoy XL | 2004 – 2005 GMC Envoy XUV | 2003- 2008 Isuzu Ascender | 2002 – 2004 Oldsmobile Bravada | 2006 – 2007 Saab 9-7x |..
  • REPLACeS PART# 25790869, 622-001, 15-40133, 15293048, 8103830290, 10383029, 15192192, 15192191, 154937, 15-40133, Duralast 922498, 376734021, Dorman 622001 found on the popular Trailblazer and Envoy models including years 02, 03, 04, 05, 06, 07, 08, 09. The fan clutch can easily be located attached to the fan between the engine and the radiator..
  • OEM FIT, QUALITY, FINISH – While this is NOT a genuine GM, Isuzu, Dorman, Duralast part it is a direct replacement and it will appear, fit and work like the factory part. If you are experiencing w....
Check Stock