ReviewsFan Header Controller

Thermaltake 9 Port LED Hub Sync Controller - Black

Manufactured with a stable SATA power input in mind, TT Sync Controller safely and reliably powers up to 9 addressable LED products..
TT Sync Controller supports motherboards that have Aura Addressable Header (ASUS), Digital Pin Header (GIGABYTE) or JRAINBOW (MSI).
3 PWM signal cables and 2 mainboard signal bridge cables are included in the pack..

Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..

Check Stock

Waveshare Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the raspberry pi CM4 or being integrated into end products.
Compared with version B, there're NO RTC, Fan controller, and battery holder on version A, which is more cost effective.
Standard Raspberry Pi CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
Onboard multiple connectors including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot.
Comes with mounting screw, easy to install. When using the M.2 interface, please use the matching screws..

Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..

Check Stock

StarTech.com USB 3.1 PCIE Card - 5 Port - 1x USB-C - 2x USB-A - 1x 2 Port IDC - Internal USB Header Expansion - USB C PCIe Card (PEXUSB312EIC)

Add an external USB Type-C and two external USB Type-A ports to your computer, plus an IDC header port that can provide two internal USB 3.0 ports.
5 Port USB 3.1 PCIe Card with 1x USB-C 2x USB-A + 1x 2 Port IDC (5Gbps).
Easily add a range of USB port types to your computer with this USB 3.1 Card to connect a variety of modern and legacy USB devices, both inside and outside your computer.
Perfect for PC upgrades or builds, it works with both USB-A and USB-C devices, and also supports older USB 3.0 and 2.0 devices / USB-C card / USB C PCIe card / USB C controller / USB Type C PCIe card / USB 3.1 controller / USB 3.1 mother board header / Internal USB header expansion / PCIe USB Host Controller / USB Type-C Host Card /PCI Express USB 3.1 Card / USB Type-C Port Adapter.

Check Stock

Gigabyte GA-970A-DS3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

...SATA 6Gb/s devices. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD..
USB: South Bridge: Up to 12 USB 2.0/1.1 ports. Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel.
Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/6 x SATA 6Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x power fan header/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/3 x USB 2.0/1.1 headers/1 x Clear CMOS jumper.
Back Panel Connectors: 1 x PS/2 keyboard/mouse port. 6 x USB 2.0/1.1 ports. 2 x USB 3.0/2.0 ports. 1 x RJ-45 port. 3 x audio jacks.

Check Stock

DEEPCOOL RF120 3in1 3X120mm RGB LED PWM Fans with Fan Hub and Extension Compatible with ASUS Aura Sync

RGB plugs of these fans can be daisy chained and the last one can be plugged into 12V motherboard header. No cable controller.
Support up to 6pcs of DEEPCOOL RGB devices, such as Gammaxx GT, Captain EX RGB, etc.
Max Air Flow: 56.5CFM, Noise: 17.8~27dB(A).

Check Stock

DeepCool SC700 A-RGB Fan Hub, 12-Port 5V 3pin ARGB Fan HUB, Magnetic backplane Design, Suitable for 5V 3-Pin Aura Sync, Gigabyte RGB Fusion, msi Mystic Light sync, SATA Powered

【Addressable RGB SYNC CONTROL】Fit for Motherboard with 3-pin Addressable RGB header(+5V, DATA, N/A, GND) , Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync and SignalRGB software..
【Safe, efficient stable output】more concise and more efficient,Even with full loaded, it still can maintain stable output..
【Small body, large capacity】. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment..
【ARGB hub 5V 3 pin fan controller pc】Only supports 5V 3pin ARGB fan Supports the installation of 12 groups of ARGB devices, supports ARGB fans, ARGB light strips, and other 3-pin 5V interface devices, lighting effect synchronization.
【Note】 the + 12V 4Pin RGB interface device is not supported! Do not insert!.

Check Stock

DEEPCOOL RF120M 5IN1, 5x120mm RGB PWM Fans with 2 Fan Hubs, Compatible with ASUS Aura Sync, Controlled by Motherboard with 12V 4-pin RGB Header, No Wired Controller

RGB plugs of these fans can be daisy chained and the last one can be plugged into motherboard 12V 4-pin RGB header. No cable controller.
Multiple control modes: breathing, static state, or multi-color cycling.
Support up to 6pcs of DEEPCOOL RGB devices, including: GAMMAXX GT/GT BK, Captain EX RGB, RGB 200EX, and so on.
Intelligent PWM functions to meet system cooling demands.
Fan Speed: 500~1500 RPM±10%. Max. Air Flow: 56.5 CFM. Noise: ≤27 dB(A). Fan Connector: 4-pin PWM. RGB LED Connector: 4-pin (+12V-G-R-B).

Check Stock

Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01

LIGHT UP THE SYSTEM: 3 pre-installed 120mm 12V motherboard sync RGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo) + 1 black fan at back.
BUILT-IN DUAL-MODE 12V SYNC CONTROLLER: Control light via I/O Port RGB Light Button (16 LED modes/7 color) or via 12V header RGB sync motherboard (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo).
16 LED MODES THROUGH I/O PORT RGB LIGHT BUTTON: RGB Mode, Single Color Mode (7 Colors), Breath Mode (7 Colors), Light Off [7 Colors: Red, Yellow, Green, Cyan, Blue, White, Purple].
CLEAR VIEW OF PC GAMING: 4mm thick tempered glass side panel with standard mounting.
BUILT-IN PSU COVER: Cover all your cables for a Professional Look combined with a window to show off your Colorful power.
DRIVE BAYS: 3 x 2.5″ with HDD Bracket + 2 x 3.5″ with HDD Tray.
Supports Mini ITX, Micro ATX, and ATX Motherboard.
I/O PORT: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Light Button.
OUTSTANDING EXPANDABILITY: 7 expansion slot. Max CPU cooler height: 160mm / Max VGA length: 380mm / Max PSU length: 170mm.
DIMENSION: 17.6″(H) x 8.3″(W) x 17.3″(D), 15.65lb.

Check Stock

Noctua NA-SYC1, 4 Pin Y-Cables for PC Fans (Black)

Y-type splitter cables for running two fans on one fan header.
Two 4-pin PWM fans can be controlled simultaneously via one PWM fan header.
RPM speed signal of one fan is transmitted to the motherboard for monitoring.
4-pin connector supports both 3-pin and 4-pin fans.
Black connectors and black cable sleeving for clean optics.
Trusted Noctua quality backed up with 6-year manufacturer’s warranty.

Check Stock