ReviewsFantech Db 10

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.

65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..

Banana Jacks for Speaker Cable Connection.
12dB / Octave High-Pass Crossover Network.
Sensitivity: 94 dB@1W 1M ^1 X 10" Woofer + 2 X 3 1/2" Tweeters ^Banana Jacks for Speaker Cable Connection ^Internal Speaker Mounting Top Hat ^12dB / Octave High-Pass Crossover Network.

Specifications: POWER [watts/ch], 1 OHM MONO: 800 x 1, DYNAMIC POWER [watts]: 1200, COMES WITH WIRED REMOTE: Yes..
DIMS [in] all models 2-5/16H x 7-1/8W x_L: 8-1/16, DIMS [cm] all models 5.9H x 18.0W x_L: 20.5..
FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB, INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V..
SIGNAL-TO-NOISE RATIO: 95dB, a-weighted, re: rated power, ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, low pass only..
SUBSONIC FILTER: 24dB/octave, high pass fixed 25Hz, KickEQ BOOST: Variable 0-6dB, centered 40Hz..

Product Type: Headset, Connection: USB-A/3.5mm Stereo Jack, Cable Length: 4.9 ft (1.5 m), Ear Pad Material: Synthetic Leather.
Headphones: [Audio output] Stereo, [Sensitivity] 94db+/-3db [Response frequency] 20-20,000Hz [Other] Adjustable headband.
Microphone: [Type] Boom [Sensitivity] -47dB+/-3db [Response frequency] 150-7000Hz [Adjustment range] 270° rotation [Noise cancellation].
Control: Status LED, microphone mute, volume (+/-), speaker mute. *Supports USB connection only.
Compatible operating systems: Windows 7 and later, Mac OS 10.7 or later, Linux.
[Dimensions/Weight] Headset: 6.3 x 6.1 x 2.3 inches (161.5 x 155.2 x 59.8 mm).
Ear pads: 2.4 x 2.4 x 0.4 inches (60 x 60 x 10 mm).
Package Contents: Headset, headset control, documents.

... Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Tape, Tuner, CD, Aux: 150mV / 22 Kohms. Output/Impedance. Tape Rec: 150mV / 3 Kohms. Pre Output: max. 11V / 1 Kohms. Total Harmonic Distortation. Mic: less than 0.02%. Phono: less than 0.04%. Tape, Tuner, CD, Aux: less than 0.01%. Signal To Noise Ration. Mic: more than 70 dB. Phono: more than 90 dB. Tape, Tuner, CD, Aux: more than 100 dB.
Frequency Response: 5Hz . 30kHz +0, -3 dB. Bass: 12dB at 100Hz. Midrange: 9dB at 1 Hz. Treble: 12dB at 10kHz. Loudness: 9/0/+9dB at 100/1k/10kHz. Mute: 20dB. Power Consumption: 15W.

Right & Left Channel Balance Settings - Right and left output can be adjusted in order to appeal to users with different ear sensitivity..
Bass Adjustment - Independent bass adjustment function provides 20-shifting choice from -10 to +10..
Treble Adjustment - Independent treble adjustment function provides 20-shifting choice from -10 to +10..
Line Output - LO BYPASS switch can relize direct line output which should be used together with E09K or L7..
Gain Selection - Three levels of gain selection at 0Db, 6Db and 12Db..

10" Woofer With Treated Foam Surround power Output 100 Watts Max85 Hz Low-Pass Filter (18 Db/Octave).
Line- And Speaker-Level Inputs frequency Response 39-85 Hz.
Subsonic Filter (12 Db/Octave At 35 Hz) For Improved Amp Efficiency sensitivity 107 Db20-7/8"L X 10-3/8"W X 12-1/4"H2-Ohm Impedance.
10-inch bass tube with on-board 100-Watt, 2-channel amplifier.