ReviewsFast Installation Water Heaters

HE 55220 Water Heater Element Replacement for Ecosmart ECO POU 6, ECO 8, ECO 11 Eco Smart Electric Tankless Water Heater Heating Element 5.5KW 220V or 6KW 240V Unit

  • ...er material. High performance alloys that can withstand higher temperatures. Effectively prevents corrosion and mineral build-up, maximising the life of your water heater..
  • Easy to install: The heating element has a screw-in construction that allows routine maintenance and installation to be completed in a matter of minutes. Disconnect the water heater from all power and water sources during installation..
Check Stock

3M Aqua-Pure Whole House Sanitary Quick Change Water Filter System AP904, Reduces Sediment, Chlorine Taste and Odor, and Scale

  • Clearly Great Water: This Whole House Water Filter Reduces Sediment Build-Up, Chlorine Taste And Odor As Well As Scale* – Helping To Increase The Life Of Hot Water Heaters And Appliances (Dishwashers, Clothes Washers, Etc)..
  • Easy To Replace: Sanitary Quick Change (Sqc) Design Allows For Fast And Easy Change-Outs Of The 3M Aqua-Pure Ap917Hd-S Replacement Water Filter Cartridge Without Having To Contact The Filter Media Or The Need For A Filter Wrench..
  • 100,000 Gallon Capacity: Replacement Cartridge Has An Activated Carbon Filter With Nominal Heavy Duty Particulate Reduction Rating Of 5 Microns And A 100,000 Gallon Capacity At High Flow Rates Of 10 Gpm And Even At Intermittent Peak Flow Rates Of 20 Gpm..
  • Flow Rate: 1” Inlet And Outlet Connections To Help A Plumbing Professional With Easy Installation And Peak Flow Rates Up To 20 Gpm To Meet The Water Pressure Demands Of Most Homes..
Check Stock

RHS Snow Melting System Roof and Valley Heater Ice and Snow Melting Mats Sizes 10 feet x 13 inches Color black 10ft mat melts 2 inches of snow per hour buy factory direct 10 ft x 13 in

  • ...re made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 10 feet length (can be made in 8', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more clinbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remodeling, and existing roofs. Installing RHS Valley Heater Systems can increase the life of your roof in addition it will enhance the value of your home or comm....
Check Stock

RHS Snow Melting System, Roof and Valley Heater, Ice and Snow Melting Mats, Sizes 5' feet x 13' inches, Color Black, 5 ft. mat Melts 2' inches of Snow per Hour, Buy Factory Direct, (5' ft. x 13' in.)

  • ...re made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 5 feet length (can be made in 8', 10', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more climbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remodeling, and existing roofs. Installing RHS Valley Heater Systems can increase the life of your roof in addition it will enhance the value of your home or ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • ...rs Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Portable Sink Self Contained Hand Wash Station with Cold and Hot Water

  • Product Information: A simple yet practical design meets most licensing health department requirements for sanitation. Portable and easy to plug in. It will run cold and hot water from the faucets. Completely assembled and ready to use as soon as needed..
  • Self contained. NO water installation or drain hose required. Only plug into a 110v outlet and fill the fresh water tank. You have now a whole sink wherever you want and need it..
  • Stainless steel NFS approved sink. We have helped hundreds of business through the US to comply with health department requirements. These portable sinks are high quality and durable. Cabinet is made out of injection molded polypropylene that is: Germ-resistant, Maintenance free, Will not warp, Will not rust and Will not dent.
  • This sink is equiped with a quality water pump, a FLOJET BW5000 Bottled Water System. FLOJET water pumps are build to last not like other water pumps that only run for a couple of months. The water heater is an EEMAX Mini Tank Electric Water Heater with a thermostat to adjust temperature range (50°F to 140°F). The EMT1 is the industry’s first (and only) glass-lined, one-gallon electric mini tank water heater. EEMAX’s water heaters are designed and tested t....
Check Stock

2 Pcs Immersion Water Heater Pool Heater Bucket Heater Submersible Electric Pool Heater for Above Ground Pool and Portable Water Heater Hot Tub Heater (Yellow, Stainless Steel-1500W)

  • Heat Fast: there are 2 pieces of the electric pool heaters, they have porous surface made of 304 stainless steel, with the high power, so that they feature the reliable thermal conductivity, and can help you quickly up heat 5 gallons of water in minutes, bringing you an enjoyable using experience.
  • Dependable and Safe: designed with reliable automatic power off function, the bath tub heater for bath can automatically turn off when the water getting 120 to160 degrees Fahrenheit, which relieves you from worries about fire, and allows you to use it with confidence.
  • Simple to Apply: place the pool water heater in a container, then fill the container with water to completely cover the heater, including the stainless steel shroud and plastic parts, and plug the heater into a properly grounded 120V AC outlet, turn on the heater, and wait for the heating to finish.
  • Extensive Applications: the immersion water heater is suitable for containers in various sizes, like portable bathtubs, pond, sink, bucket, mini inflatable swimming pools.
  • Please make sure that your container is designed to hold boiling water.
Check Stock

Eemax SP3012, White

  • Eemax Tankless water heaters heat your water faster, heat your water with more precision, and heat your water safer.
  • Eemax water heaters are designed to reduce liming and calcification.
  • Eemax water heaters are designed and tested to last past the 10 year mark.
  • Heat water instantly where you use it, so you don't have to waste water waiting for the water to heat up.
  • Micro-processors keep the water the exact temperature with +/- 1 Degree accuracy to prevent scalding.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • ...rs Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • ...arders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

2 Pcs Immersion Water Heater Pool Heater Bucket Heater Submersible Electric Pool Heater for Above Ground Pool and Portable Water Heater Hot Tub Heater Black Stainless Steel-1500W

  • Heat Fast: there are 2 pieces of the electric pool heaters, they have porous surface made of 304 stainless steel, with the high power, so that they feature the reliable thermal conductivity, and can help you quickly up heat 5 gallons of water in minutes, bringing you an enjoyable using experience.
  • Dependable and Safe: designed with reliable automatic power off function, the bath tub heater for bath can automatically turn off when the water getting 120 to160 degrees Fahrenheit, which relieves you from worries about fire in some way, and allows you to use it with confidence.
  • When heating the inflatable pool, please avoid the contact of the heater with the inflatable pool to prevent damage.
  • Simple to Apply: place the pool water heater in a container, then fill the container with water to completely cover the heater, including the stainless steel shroud and plastic parts, and plug the heater into a properly grounded 120V AC outlet, turn on the heater, and wait for the heating to finish.
  • Extensive Applications: the immersion water heater is suitable for containers in various sizes, like portable bathtubs, pond, sink, bucket, mini inflatable swimming pools.
  • Please make sure that your container is designed to hold boiling water.
Check Stock