ReviewsFast setting Bonding

Starbond Instant Set Accelerator (Activator) for CA Super Glue, 6 oz. Aerosol

  • ✅ SUPER GLUE ACCELERATOR - SPEED UP THE BONDING TIME: No more waiting! Cures CA glue in seconds..
  • ✅ NO MORE WHITENING: When superglues dry too fast, you'll end up with whitening or "hazing" of the bonding surface. Our specially formulated CA accelerator is made to dry slightly slower than other accelerators on the market to prevent this effect..
  • ✅ EASY BONDING: Simply spray accelerator on one surface, glue on the other surface, and press together and hold for a few seconds..
  • ✅ CLEAN APPLICATION: The aerosol accelerator sprays a finer mist that could sometimes be preferred..
Check Stock

Permatex 09102-6PK Rearview Mirror Adhesive Kit Pack of 6

  • Fast-setting, clear epoxy in an easy-to-use 2-part dispensing syringe.
  • This water and solvent resistant epoxy sets in 5 minutes with no clamping needed.
  • Better choice than super glues for bonding parts with larger gaps.
  • Temperature Range: -60°F to 180°F (-51°C to 82°C).
  • Suggested Applications: Complex, multi-piece assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic,....
Check Stock

Epoxy 330 Glue, 1/2 Fluid Ounces, Pack of 2 | GLU-203.30

  • Great for bonding gems, glass, china, ceramics, stone, metals and more.
  • Thickens in 15 minutes and hardens in 2 hours.
Check Stock

Weldon 16-- Sci grip 16 -- 5 oz. tube-- 3 PACK

  • Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other.
  • It will also bond to other plastics and porous materials.
Check Stock

Epoxy

  • This two-part xpoxy 330 water-clear glue line bonds with fast setting time..
  • Used to bond gem materials to metal jewelry findings and takes a high polish for inlay..
  • It can also be used for invisible bonding of glass china ceramics stone metals and other non-porous materials..
  • Thickens in 15 minutes and hardens in 2 hours..
  • Hardens in 10 minutes under a heat lamp. Two 1/2 fl. oz tubes..
Check Stock

D Aventik Edison Design Three Best Selected Bonding UV Glues Combo Tool Kit with 395nm Zoom-able UV Pen Most Versatile Application in Bonding Plastic Welding

  • Combo tool kit of three best selected bonding function UV glues, each 1/3oz, 10ml with a bluelight pen included, providing versatile applications for welding plastic, figurines, glass, ceramic, metal, wooden, leather, vinyl, Kevlar and so much more to fix ends of phone chargers, children's broken toys, jewelry, glasses. Great for repairs, jewelry making, gap filling, parts fabrication, electronics potting, and tacking. Silicon rubber and PP might not work..
  • Fast Cure within 10 seconds under bluelight pen light. After curing, high and stable transparency without yellowing nor whitening under extreme temperature and humidity, great for indoor and outdoor uses.
  • High bonding strength, peeling test can tear the body of most targeted materials.
  • Resistant to severe vibration. Safe and environmental friendly pass EU certification..
  • All purposes UV glue 360 (356) provides excellent bonding power for both plastic materials such as Acrylic, PC, PVC, ABS, etc, and also for inorganic materials such as glasses, ceramics, metal, etc. All purpose can also be used for bonding wood, leather, paper and more others. It has specially engineered 800 to 1000 CPS viscosity ideal for easy application in relative large break surface. It is also great for crystal crafts and elec....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...2 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

Permatex 84145 Permapoxy Black Plastic Weld - 0.84 fl. oz.

  • Structural adhesive designed for general purpose bonding of a wide variety of materials.
  • Forms a tough, durable bond with a permanent strength up to 3500 PSI.
  • Fast-curing product sets in five minutes at room temperature.
  • Bonds most plastics, composites, ceramics, and wood in any combination.
Check Stock

BLACK+DECKER Hot Glue Gun Kit, White (BDHT70001)

  • USE ON A VARIETY OF MATERIALS: High- and low-temperature gluing with one gun.
  • GLUE STICK COMPATIBILITY: Uses standard dual-temperature glue on both settings and hot-melt formulas on high setting.
  • FAST HEAT-UP AND BONDING: Glue gun heats up quickly and bonds within 6 minutes.
  • BUILT-IN STAND: Fold-down stand keeps the glue gun upright and stable when left on between uses.
  • GLUE STICKS INCLUDED: 30 glue sticks (7/16 in. diameter) included so you can get started crafting right away.
Check Stock

3M Scotch-Weld Green Low Odor Acrylic Adhesive, DP8810NS, 490 mL

  • Transportation, metal working, HVAC, sign, marine, general industrial, sporting goods, solar energy, composites, electronics, military, metal bonding, transportation and aerospace.
  • Bonding, joining, gluing, adhering, attaching, assembling, encapsulating, potting and sealing.
  • Durable finished bond with excellent shear and high impact strength.
  • Low odor and non-flammable properties for a safer working product compared to typical adhesives.
  • Bonds difficult surfaces such as powder coats and oily surfaces.
  • Fast adhesion and drying time reduces waiting and maximizes work efficiency.
  • Glass bead technology to control bond line thickness to produce consistent quality.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock