ReviewsFe cr al Alloys

Fielect Heating Element Coil Wire 220V 4000W Resistance Wire Furnace Heater Wire FeCrAl Silver Heat-resistant Wire Length 1000mm,1Pcs

【Parameters】 - Size(approx):Inner diameter:1.3mm/0.05".
【Material】 - The heating element is made of FeCrAl heating alloy, high temperature resistance, corrosion resistance, high quality, and safety.
【Advantage】 - The kiln element has good performance, good thermal efficiency, uniform heating, safe use and long service life.
【Application】 - Heating element coils have a wide range of uses, such as small electric furnaces, muffle furnaces, electric heating tubes, and household appliances.
【Noted】 -Please stretch the heating element coil before connecting the power supply, otherwise it will burn and cause damage.

Check Stock

Element 1” Cube Set 7 PCS - Titanium Tungsten Aluminum Copper Iron Chromium Magnesium - with Display (95.0-99.95% Purity TI W Al Cu Fe Cr Mg)

STUNNING 1”X1”X1”, 95.0-99.95% pure, element cube set, precision machined, engraved with the name and atomic data, set on a machined aluminum display base..
PREMIUM QUALITY Set includes Titanium (Ti), Tungsten (W), Aluminum (Al), Copper (Cu), Iron (Fe), Chromium (Cr), Magnesium (Mg), cubes plus base..
DEMONSTRATION of some of the most globally significant elements in the periodic table..
PERFECT for display in the office, classrooms, labs..
100% CUSTOMER SATISFACTION: The 7 Piece 1” Cube Element Set is guaranteed for full satisfaction. If you receive the product with any damage, we take full responsibility. If the product does not meet your standards, a full refund will be issued..

Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..

Check Stock

MASTERCANOPY 10FT Patio Umbrella,Outdoor Offset Cantilever Umbrella with Crank and Cross Base (Light Grey)

⛱ Materials：The frame of the cantilever umbrella is made of heavy duty anti-rust Fe-Al material and cover is made of 100% polyester fabric (weight 200g), which is waterproof, UV-resistant and fade resistant..
⛱ Easy to Operate：Rotate the crank to open or close the umbrella. Easy to adjust the angle with the handle according to the angle of the sun ,detachable pole allow easy installation and storage.
⛱ Suitable For : Garden, pool, deck, beach, restaurant and other outdoor areas. This offset hanging patio umbrella provides more sun shade for patio or other outdoor to keeps you cool and comfortable in your outdoor life.
⛱ High Quality: Anti-rust powder coated Fe-Al frame with 8 Aluminum ribs for durability. 8 sturdy ribs provide stronger support than 6. Single wind vent on top for stability..

Check Stock

38 Piece 5/16 Premium C6 Carbide Tipped Lathe Tool BIT Set BRAZED Single Point

5/16" Premium C-6 carbide tips designed for long tool life in steel, alloys, etc..
8 Pcs Style AR & AL- For general machining applications, turning, facing, boring and chamfering.
6 Pcs Style E- 30-degree Lead angle for threading, chamfering, V-grooving, turning, facing & boring.

Check Stock

WeldingCity 10-pcs Titanium TIG Welding Rods ERTi-5 (Grade-5) 1/16' x 36' | Pack of 10-pcs

Premium quality ERTi-5 (Grade-5) Titanium TIG welding rods with available diameters 0.035", 0.045", 1/16", 3/32" and 1/8".
acid-pickled surface to fully remove contaminants.
Features and Applications: ERTi-5 (Grade 5, Ti 6Al-4V), commonly called “6-4” is the most common and widely used alloy grade. It has good weldability and can be heat treated to a higher strength or toughness. Often used in corrosion service where higher strength is required..
Package of 10-pcs and 1-lb ERTi-5 Titanium TIG welding rods. With volume discount. Buy More Save More!.
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

Bike Pedals Mountain MTB Road Bicycle BMX Clipless Non-Slip Pedal with 3 Bearing 9/16\(Aluminum)

【Premium Material】Hollow lightweight Al Alloy Bike pedals are wide but thin with DU Bearing smooth bearings, corrosion resistant wear, to ensure a durable use, no need to worry about fracture, and it is waterproof and dust-proof.
【Sturdy & Durable】High-strength al alloy integrated molding and CNC anodizing process design make Bicycle Pedals high strength, impact resistance. Bike pedals can withstand strong forces, minimizing friction, saving up to 30% of physical effort.
【Sealed bearing】The pedals adopt sealed and self-lubricating bearings to prevent dust from entering and do not hinder rotation and extend life.
【Anti-slip nail】Each bike pedal has 12 non-slip nails, makes the pedal more efficient, gives you a lot of grip and stability. the bike pedals are suitable for mountain bikes, road bikes, city bikes, etc. And make it an ideal choice for your riding.
【Package list】A pair of road bike pedals, and there are left and right letters on the outer layer of the pedal axis.(CR-L should be installed on the left, and CR-R on the right.).

Check Stock

Paint Thickness Gauge for Automotive Digital Auto Paint Meter Coating Thickness Gauge Painting Tester Coat Gauge Meter Resolution 0.1mil Auto Digital Calibration Data Hold Soft Carrying Case

【Automatic Substrate Recognition】Steel(Fe)/Al(nFe)/Galvanized(Fe+Zn) modes(Auto Detect). This paint thickness gauge can make a quick and....
【High Accuracy and Large EBTN LCD】This Auto Paint Meter equip with high accuracy probe can measure up to 0.1um/0.1mil/0.001mm, large EBTN LCD....
【Multi-function with Soft Carrying Case】Maximum, minimum and average value, battery indicator, three measurement methods, automatic shutdown,....
【Tri-color Backlight】Orange/Green/Red three color backlight, represent different range of test result, and the range is can be customized..
【Widely Used】This coating thickness meter is suitable for Corrosion protection, Electroplaters, laboratory, workshop, paint shops, automobile,....

Check Stock

20 PC 1/4 C2 & C6 Carbide-Tipped Tool BIT Set Single Point BRAZED Lathe KIT

Set contains 20 pcs 1/4" premium carbide tips- 10 pcs C2 grade (for cast iron, brass, and similar materials) and 10 pcs C6 grade (designed for long tool life in steel, alloys, & harder materials).
2 Pcs C2 & C6 each- Style AR & AL- For general machining applications, turning, facing, boring and chamfering. Cuts to a square shoulder..
2 Pcs each Style BR, 1 pc each Style BL- For general machine applications where a 15-degree lead angle is desired.

Check Stock

20 PC 1/2 C2 & C6 Carbide-Tipped Tool BIT Set Single Point BRAZED Lathe KIT

Set contains 20 pcs 1/2" premium carbide tips- 10 pcs C2 grade (for cast iron, brass, and similar materials) and 10 pcs C6 grade (designed for long tool life in steel, alloys, & harder materials).
2 Pcs C2 & C6 each- Style AR & AL- For general machining applications, turning, facing, boring and chamfering. Cuts to a square shoulder..
2 Pcs each Style BR, 1 pc each Style BL- For general machine applications where a 15-degree lead angle is desired.

Check Stock

Dollger Classic Square Half Frame Polarized Sunglasses for Mens Womens Green lens Horn Rimmed Glasses for UV Eye Protection

★TAC POLARIZED LENS-These green mirror lenses includes 9 layers,blocks 100% harmful UVA & UVB Rays, revo lens restores true color, eliminates....
★PREMIUM COMPOSITE METAL FRAME-This gunmetal frame is made of Al-Mg（Aluminum and Magnesium） alloys from Brazil,which is widely used in Aerospace....
★TRENDY APPEARANCE WITH QUALITY TEXTURE: New coming elegant retro brand womens polarized sunglasses design，combination of vintage with stylish....
★LIFETIME BREAKAGE WARRANTY ON FRAME & LENS -In case any broken problem happens, Dollger provides lifetime after sale service for all products..
★30 DAY MONEY BACK GUARANTEE- All Dollger customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing....

Check Stock