ReviewsFeeding Machinery

Fulton 6 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines

  • ..., pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working..
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even..
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!.
Check Stock

SFU2005-600mm Ballscrew Kit + 1Pcs BK/BF15 End Support, Ball Screw RM2005 20mm Length 600mm(23.6 inch) Pitch 5mm with End Machined

  • SFU2005 with end Machined ballscrew Length 600mm(23.6inch) with nut+BK15/BF15 end support..
  • The antibacklash ballscrew material is bearing steel, the ballscrew support seat surface is electroplated processing, surfacing smooth and beautiful..
  • SFU2005-600mm ballscrew, low frictional loss, high transmission efficiency, manufactured under strict control of temperature and humidity..
  • C7 standard, precision is assured because of thorough quality control system, minimum starting torque, able to apply high speed and micro-feeding.Above average axial stiffness..
  • The ballscrews apply for electronic machinery robot, measuring instruments, medical equipment, factory automation equipment, CNC machine, machine tools..
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines

  • ..., pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working..
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even..
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. 24 inch straight edge has a .001" tolerance, the 38 inch straight edge has a .002" tolerance and the 50 inch straight edge has a .003" tolerance..
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

CHUANGNENG Ballscrew kit SFU1605 RM1605 1500mm Ball Screws Bearings + Set BK/BF12 Kits End Support Ballnut Housing,with end Machining,Length Approx 59inch / 1500mm for CNC Machine

  • Ballscrew Overall Length: 1500mm(59in),model:SFU/RM1605.
  • End machined ballscrew SFU1605-1500mm L with nut+BK12/BF12+Ball nut housing..
  • Material :Bearing Steel and aluminum alloy, Minimum starting torque, able to apply high speed and micro-feeding The ball screws precision is assured because of thorough quality control system..
  • no stick-slip effect, heats up less, reduced drive power required , high axial forces per Ball Screw volumina..
  • The ballscrews apply for electronic machinery robot, measuring instruments, medical equipment, X-Y table, factory automation equipment, etc..
  • Packange would be sent within one day FROM CA & NJ WAREHOUSE ,Items are generally dispatched within 1 business day..
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Vktech 4 Pcs SC20UU 20mm Aluminum Linear Motion Ball Bearing Slide Bushing for CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock