ReviewsFeeler Gauges

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.

Check Stock

JTC Tools 24 INCH Engine Block Straight Edge S50C High-Carbon Steel by JTC 1010

*Dimension 36mm height and 600 mm length. Convenient hanging hole and edge protector. *Use with feeler gauges to check distortion in engine blocks, cylinder heads and flywheels..
Best Quality,Fastest Shipping,Local Service Support.

Check Stock

MusicNomad Precision Nut Height Slotting Gauge Tool (MN601), Silver

Gauge Includes the 3 Most Common Nut Height Measurements (.016", .018", .020") for Electric, Acoustic, Classical & Bass Guitars. Plus 3 additional sizes (.012”, .014”, .022”) to accommodate a desire for lower action or a heavier pick attack..
Precision, Smooth Stainless Steel without the Annoying, Messy Oil Found on Traditional Feeler Gauge Sets.
Laser Etched Sizes (in. & mm) & Instrument Type that Won't Rub Off.
Easy to Follow Instructions Printed Right on the Handle.
This Gauge is Part of our KEEP IT SIMPLE, SETUP (KISS) Method using our Precision Gauges & Tool Sets.

Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..

Check Stock

ARES 11042-2-Piece Tapered Feeler Gauge and Offset Feeler Gauge Set - Tapered Gauge has 32 Dual-Marked SAE & Metric Sizes - Offset has 16 Dual-Marked Sizes - Precisely Measure Mechanical Clearances

SPECIFICATIONS: This set includes two types of feeler gauges. The tapered gauge has 32 blades with a tapered profile to allow for access into tight places. The Offset gauge has 16 blades with an offset design that’s great for awkward areas. Each blade is marked with both metric and SAE sizing, and each set folds neatly into itself for easy transportation and storage. These gauges let you measure tappet clearances, spark plug gaps, bearing clearances, piston ring gaps and more..
TAPERED GAUGE SIZES: Inch - 0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.034, 0.040 (Metric - 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00mm).
OFFSET GAUGE SIZE: Inch - 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 (Metric - 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.48....

Check Stock

Rustark 4 Pcs Metric Radius Gauge Stainless Metal External and Internal Arc Fillet Concave Convex Measuring Tool Set Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25

【What you Get】The Radius Gauges set contains 4 pcs Radius Fillet Gauge in 4 kinds of shape and measuring range: R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25. In addition, we also offer you reliable after-sale service. Pls feel free contact us!!!.
【Long Service Time】Made of stainless metal, not easy to rust in dry environment, Wear resistant and durable, high hardness. NOTE: In order to prevent the feeler gauge from rusty and caton, the surface of each ruler is coated with anti-rust oil. Pls don’t mind..
【Excellent Design】The 360-degree Locking Screw design allows you to unfold or fold it easily.Laser Engraving treatment makes each leaf convenient to identify..
【Multiple Function】Each of feeler gauge have 2 kinds of blades so that it can check both convex and concave surfaces, meeting your different demands.High hardness and precision, good toughness, smooth surface could satisfies your needs..
【Work Great】Widely use in home improvement, machine installation,electric equipment, suitable for designers, engineers, fitter, mechanics to measure the thickness or width of screw, valve, bearing ect..

Check Stock

3 Pieces Stainless Steel Feeler Gauge Dual Marked Metric SAE Offset Valve Thickness Gauge 32-Pieces/ 26-Pieces/ 16-Pieces Feeler Gauge for Measuring Width Thickness

Feeler fauge sets: package contains 3 pieces of feeler gauge, including 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), 26-pieces feeler gauge (measurement: 0.0015-0.025 inch/ 0.04-0.63 mm) and 16-pieces offset feeler gauge (measurement: 0.005-0.02 inch/ 0.127-0.508 mm).
Adequate size and style to meet your needs, you can choose appropriate feeler to use according to the actual needs.
Quality material: made of 65 manganese steel, each feeler gauge is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corr....

Check Stock

CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge..
【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently..
【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces..

Check Stock

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.

Check Stock

Monoprice Delta PRO 3D Printer with 270 x 300 mm Heated Glass Build Plate Auto Leveling Triple Fan PID Tuning Fully Assembled

Auto bed level: no longer will you have to chase the perfect bed level using hex keys & feeler gauges. The new auto bed leveling system allows you to....
Extra large build volume: the extra large, 270 x 300 mm build volume lets you make full prints of models that would otherwise need to be printed....
All metal construction: all structural parts and parts related to printing are constructed with metal, fitting together with no room for unwanted....
Auto pid tuning: the ambient temperature of your environment affects your print. Maintain consistent temperatures during printing by taking advantage....
Fully assembled quiet performance: the delta pro ships fully assembled & ready to print out of the box, so you can spend more time printing & less....

Check Stock

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperati....

Check Stock