ReviewsFemale Pin Header Dimensions

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

  • Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
  • It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
  • 4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
  • ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
  • PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Rocketek 9pin USB Header Male 1 to 4 Female Extension Card USB 2.0 Splitter Cable Connector for Motherboard Adapter Port Multiplier for CPU WiFi Receiver Fans and RGB Light …

  • ✔ Motherboard USB header splitter 1 to 4 ports Hub, wire belt shielding.
  • ✔9 Pin USB Header for PC motherboard Can Prevent short circuit outlet design. motherboard USB splitter can prevent accidental removal of circuit....
  • ✔ USB Splitter Convert motherboard USB 2.0 Female to 4 Females. High-quality electronic components.
  • ✔ 30cm 9 pin USB Header Male 1 to 4 and hub connecting.
  • ✔ Self-Stick 9 pin Motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the....
Check Stock

Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces

  • Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers..
  • Total length is 12" (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets..
  • Wire Pitch: 0.05" (1.27 mm) Center Spacing.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

YOUKITTY PWM Fan Splitter, 4-Pin Adapter Cable Y Splitter PC CPU Fan Splitter PC 4-Pin Fan Extension Power Cable 1 to 4 Converter 10 inch (2 Pack)

  • Connector 1: 4-pin female connector port..
  • Connector 2: 4-pin male connector (1 of which is 4-pin and 3 of which are 3-pin)..
  • Compatibility: the cable is compatible with all 4-pin and 3-pin chassis fan coolers and with 4-pin and 3-pin PMW fan connectors..
  • Functionality: a 4-pin female connector on one end connects to the motherboard port and a 4-pin male connector on the other end (1 of which is 4-pin and 3 of which are 3-pin) allows 4 computer case fans to be connected to a single motherboard fan header, with the fan distributor cable providing additional fans to increase airflow in your computer case..
  • Parameter specifications: Length 10 inches (25 cm) (approx.). Quantity: 2 pieces..
Check Stock

MakerSpot Proto Board Breadboard HAT Soldered with Female Pin Connector PCB Prototyping Board for Raspberry Pi Zero W (3 Pack)

  • 164 holes of prototyping area, pre-soldered with Female Pin Header.
  • 4 rows of 6 connected holes for power rails and other purposes.
  • Silkscreen marking for 40-pin Pi Header reference.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

Wishiot 5pcs MPU-6050 Acceleration Sensor 6dof Three-Axis Accelerometer Gyro Sensor IMU with 1pc 40Pin Male Header and 1pc 40Pin Male to Female Dupont Cable for Arduino RC Quadcopter Drone

  • Communication modes: standard IIC communication protocol.
  • Use the chip: MPU-6050, Power supply: 3V-5V.
  • DIY your own project and display the MPU-6050 Sensor Readings on oled via connecting it with R3 MCU Board or NodeMCU ESP32 Devkit.(oled display, R3 MCU board or ESP32 Devkit, breadboards not included in this listing).
  • What you will get: 5pcs MPU-6050 Accelerometer Gyro Sensor with 5pcs 8Pin Straight Pin Header and 5pcs 8P Bend Pin Header, 1pc 40P Female to Male Dupont Cable, 1pc 40P Male Pin Header..
  • How to email us? Please click “WISHIOT”(you can find Sold by WISHIOT under Buy Now button), in the new page, click “Ask a question” to email us.
Check Stock

Smraza 100pcs Double Sided PCB Board Kit, Prototype Boards for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits, 30PCS 40 Pin 2.54mm Male and Female Header Connector

  • Selection of Multi-Sized Proto Boards - 30 pieces double-sided prototype boards of 4 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards.
  • Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header.
  • pitch: 2.54mm, single row and straight connector.
  • Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P.
  • pitch: 5.08mm, rated voltage: 300V, rated current: 16A..
  • Jumper caps - 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color..
  • Environmental and Elegant Packaging - Compact paper package take little footprint..
Check Stock

Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black

  • 600mm in length and flexible for easy cable routing and management.
  • Synchronize and control using Phanteks DRGB cases or compatible addressable RGB motherboards.
  • The cable features two connectors one for Phanteks DRGB products and the other for third party addressable RGB products.
  • Compatible with Asus MSI Gigabyte and Asrock addressable RGB motherboards.
  • Connector 1 x 3 Pin adapter (Female 5V Data X Ground) to MB DRGB PIN header (Male) 1 x 3 Pin adapter (Male 5V Data X Ground) to split another DRGB adapter 1 x 3pin connector (Female 5V Data X Ground) to PHANTEKS DRGB Device.
Check Stock