ReviewsFemale Pipe Thread Fittings

Set of Brass Garden Expanding Hose Joint Male Pipe Adaptor Repair with Quick Connector Fitting

Heavy-duty brass construction with rust proof. Follow the instructions when repairing water pipes, and they do not fit for thicker outer hose cloth expandable hoses..
Pipe joint diameter is 10mm/0.39″. Note: The outer diameter of the hose should not exceed 0.47”(11.8mm). And these pipe fittings are quick connector system, not 3/4″ thread..
Make quick, effective repairs to an expandable hoses. Suitable for most quick male end connectors (outer diameter 16mm), secure Fit, no-Leak connection. Not 3/4″ thread..
They can be use garden hose mender, end hoses male mender, end hoses female mender..
Include: 2 x brass female quick connectors, 1 double male quick connector.

Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
Bulkhead OD 25mm, suitable for about 25mm ID hole..

Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....

Check Stock

Brass Bushing 1 Male x 3/4 Female Threaded Brass Reducer Bushing Lead-Free Pipe Fittings 1inch x 0.75 inch

ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..

Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.

Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 3/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N3(Pack of 2)

【Product Name】 Straight Push to Connect Fittings Air Fittings.
【Size】1/4" Tube OD x 3/8" Female NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
【Features】Control pipeline connection or disconnection..

Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N1(Pack of 10)

【Product Name】Straight Push to Connect Fittings Air Fittings.
【Size】1/4" Tube OD x 1/8" Female NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
【Features】Control pipeline connection or disconnection..

Check Stock

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.

Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

Check Stock

Brass Pipe Fitting Brass Bushing 1 Male x 3/4 Female Hex Bushing Reducer Threaded Brass Reducer Bushing Pipe Fittings 1inch x 0.75 inch

ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..

Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..

Check Stock