ReviewsFemale Thread Ball Valve

YELUN Garden hose shut off Valve- 3/4”Heavy Duty Brass Shut Off Valve Hose ball Valve Garden Hose Connector 2 Set

  • Solid Brass Shutoff Ball Valve Faucet Hose Adapter，3/4 in.Male * 3/4 in. Female,garden hose thread. Garden nozzle,watering tools,accurate attachment to faucet/spigot..
  • Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage，Contains 2 Set Solid Brass Shutoff Ball Valve with 4 pcs free rubber gaskets and 1 PTFE pipe seal tape.
  • Shut off valve offers easy on, off and flow control.Allows you to change out any spraying device without having to trek back and forth to the faucet to shut the water on and off.Used indoors or outdoors, you can connect hoses or hard pipes!.
  • swivel connectors for accurate attachment to garden hose ends,sprayer,outdoor faucet..
  • With 3 years product warranty， If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

R134A R410A R22 R12 Charging Hoses and Ball Valve Set, 3 Pcs Color Coded Hoses/w Ball Valve 1/4" SAE Thread (7" Long) for AC HVAC Maintenance Kit and Air Condition Refrigeration Charging Tools

  • WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R410A,R22,R134a,R12..
  • HIGH WROKING PRESSURE --- 7" Long Charging Hose Completed with Solid Brass Manual Shut-off Ball Valve. Rated working pressure: 3000 psi burst / 600 psi Max. working pressure..
  • WELL DESIGN --- Designed to meet standard 1/4" SAE female refrigerant charging hoses set with shut off of red, blue and yellow. Ball valve design with a quarter turn of the valve handle switch for controls refrigerant. Can be operated with one hand - Screws onto charging hose end..
  • PREMIUM QUALITY --- Made of heavy-duty solid metal for durable use. Valves are color coded on knobs 1-Red, 1-Blue & 1-Yellow..
  • ONE YEAR WARRANTY --- The HVAC, HVAC/r, A/C maintenance tools comply with one year warranty, should be there any question, please feel free to contact us..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • ...lease feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
Check Stock

Mudder 5 Pieces 1/4 Inch Air Chuck Set Including S690 Dual Head Air Chuck, Open Flow Chuck and Closed Flow Straight Tire Chuck with Clip for Tire Inflator Pressure Gauge Supplies

  • Package includes: there are 1 piece of S690 dual head air chuck, 2 pieces of closed flow air chuck and 2 pieces of open flow ball air chuck with clip, 5 pieces in total, can meet your needs of different needs.
  • Dual head air chuck: designed with 1/ 4 inch Female national thread, can compatible with tires on trucks, buses, and other 2-in-1 multi-functional air chucks, functional in checking inflation and pressure, the maximum air pressure is 150 pounds per square inch.
  • Closed flow air chuck: 1/ 4 inch female national thread and rated pressure can be up to 250 pounds per square inch, it enables the shutoff valve to shut down the air flow when the stem is not opened, air only flowed when the chuck is engaged, the straight tire chuck can compatible with valves for most vehicles.
  • Note: when you take the air chuck to measure pressure or inflate a tire, please use the clip to make sure the chuck to the valve stem for sealing.
  • Open flow air chuck: designed to compatible with tire inflator gauges, suitable for most, there is a locking clip which can secure to seal the air chuck into place to a valve stem, so you don't need to make the chuck to valve stems, suitable for trucks, buses, cars, bicycles and motorcycles.
  • Material: our air chuck set is mainly made of bra....
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
  • STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Tecmolog 3-way 3/8" and 1/2" 3 Way Adapter Tee Connector Stainless Steel 3/8" Water Line T Fitting Brushed Nickel, SBA020B

  • US 3/8" female thread connects to the angle stop valve, US 3/8" male thread connects to the water supply line and G 1/2" male thread connects to the G1/2" flexible hose.
  • Solidly constructed of stainless steel with nickel finish for long term durability, resisting daily rust and tarnishing.
  • Rubber gaskets included for a better tight seal, fits well with your fixtures without leaking if install properly.
  • Screwing on the movable female thread nut without turning the entire valve around when outlet is close to a wall.
  • Used for adding an outlet on a water shut off valve for a laundry washer, toilet bidet, faucet and many more.
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

Boltigen R134A Can Tap, R134A Self-Sealing and Puncture Style Refrigerant Can Tap Valves with Refrigerant Tank Adapters for Refilling Automotive Air Conditioning Systems

  • You Will Receive: 1pc R134a self sealing can tap, 1pc R134a non self sealing can tap, 1 pc 6014 vacuum pump adapter 1/4 Flare Female to 1/2 Male, 1 pc 6015 R134A refrigerant tank adapter 1/2 Female to 1/4 Male Flare and 1 pc valve core remover, 5 pcs in total, valuable and practical kits of R134a can tap that meet your connectivity needs and provide convenience in your daily life..
  • R134A CAN TAP: the R134a can taps are made of quality brass material, which has good durability and anti-rust, can deal with most extreme conditions, T handle for easy fingertip control, thickening seals to prevent leaking..
  • REFRIGERANT ADAPTER: the vacuum pump adapter features quick and easy connection and disconnection with high flow, you can just hand tighten the vacuum pump adapter and get a good sealing, suitable for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems..
  • Wide Compatibility: Our R134a self sealing can tap valve refrigerant dispenser and non-self sealing can tap valve with 1/2 female thread to compatible with 1/4" SAE (R12 R22) female fitting AC charging hose, and it comes with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac....
Check Stock