ReviewsFep Teflon Insulation Wires

NewFantasia 4.4mm Male to Male Balanced 5 Pole Headphone Audio Adapter Cable 8 Cores 6N OCC Copper Single Crystal Silver Plated Wire Walnut Wood Shell 4.4mm to 4.4mm Male 15cm

  • This cable is made of 8 strands*0.08mm*37 cores 6N OCC copper Single Crystal Silver Plated wires, and the sheath is made of FEP, which has excellent temperature resistance range: -65℃~300℃.
  • Connector: 4.4mm Balanced Male to 4.4mm Balanced Male, package include:1*audio AUX adapter cable.
  • The connectors shell are made of the walnut wood / Solid Wood - Walnut + Brass Gold Plated.
  • The 6N OCC copper Single Crystal Silver Plated wires provide clear sound, and a protective layer is added to eliminate noise interference problems, you will enjoy matchless HiFi sound and maintain original sound quality of your headphone..
  • The 4.4mm Balanced male is compatible with SONY WM1A, NW-WM1Z, PHA-2A, ZX300A Audio player & Power amplifier / Monitors / Speaker / HIFI equipment and so on players with 4.4mm Balanced port.
Check Stock

NewFantasia 4.4mm Balanced Male Cable 6N OCC Copper Single Crystal Silver Plated Cord Compatible with Hifiman Ananda, Sundara, Arya, HE400SE, Deva-Pro Headphones (4.4mm to Dual 3.5mm Male Version)

  • Only compatible with Hifiman Sundara, Arya, Ananda, HE400SE with dual 3.5mm version Headphones.
  • Connector: 4.4mm Balanced Male to dual 3.5mm Connector Jack Male, Length: 2.1meters(6.8ft), Package include:1*replacement audio cable,.
  • This replacement cable is only compatible with Hifiman Sundara, Arya, Ananda, HE400SE Headphones, please must confirm that your headphone is the model comes with the dual 3.5mm male jacks.
  • The 4.4mm Balanced Male is compatible with SONY WM1A, NW-WM1Z, PHA-2A and other Audio player that with 4.4mm Balanced port..
  • This cable is made of 6N OCC copper Single Crystal Silver Plated wires, the cable total include 4 strands*0.08mm*37 cores 6N OCC copper Silver plated wires , and the sheath is made of FEP, which has excellent temperature resistance range: -65℃~300℃.
Check Stock

Selizo 10 Pack PTFE Teflon Sheet for Heat Press 16" x 24" Non Stick Heat Resistant Craft Mat

  • PACKAGE CONTENT: The Teflon heat press sheet comes with 10 pack Teflon sheets that are ideal for heat presses.
  • HIGH TEMPERATURE RESISTANCE & WATER REPELLENT: These Teflon heat press sheets are made of glass fiber that are temperature resistant and water repellent. Insulation effect can reach 600 ° F and they also can be reused up to 1000 times.
  • EASY TO CLEAN: The non-stick Teflon heat press mats can be utilized many times on both sides, the non-stick attribute made them easy to clean. You can just wipe paint, glue, wax, baking clay etc. when finished.
  • TRIM FOR CONVENIENT USE: The craft sheets are approx. 16” x 20” in size. You can cut them into any shapes and any size to use.
  • MULTIFUNCTIONAL FOR CRAFTS: These PTFE craft mat sheets can serve as barbecue grill mats, non-stick oven liners, ironing protectors, heat press transfers, and also can be used in painting and other crafting projects..
Check Stock

Heat Tape 6 Pack Hight Temp Tape and Teflon Sheet for Vinyl Heat Press, Sublimation Heat Resistant

  • HEAT RESISTANT TAPE: Wide temperature range from -73℃ (99℉) to 280℃(536℉). Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board.
  • HIGH TEMPERATURE RESISTANCE & WATER REPELLENT: The teflon sheet is made of glass fiber that are temperature resistant and water repellent. The insulation effect of these teflon pressing sheet can reach 600 ° F, they are a must have to protect your working surface.
  • REUSABLE AND CONVENIENT FOR USE: The teflon sheet for heat press are approx. 12” x 16” in size. They can be utilized on both sides and can be cut into proper size for convenient use..
  • MULTIFUNCTIONAL FOR CRAFTS: These teflon heat press sheets can serve as barbecue grill mats, non-stick oven liners, ironing protectors, heat press transfers, ironing board, they are perfect for baking, grilling, cooking, BBQ, roasting, pressing, ironing, painting and other crafting projects.
  • PRODUCT WARRANTY AND CUSTOMER SERVICE: We provide 36-day money-back and 24-month warranty. So feel free to contact us if you have any question.
Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

Pangea Audio Interconnect Cable RCA to RCA - 1.0 Meter - Pair

  • Conductors use US-Made Cardas Grade One copper.
  • Solid signal conductors, stranded returns.
  • Premium black chrome plated Prime 400 RCAs with Teflon insulation.
Check Stock

Sovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer

  • Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono Se , QIDI TECH....
  • Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing.....
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage..
  • 2021 New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP....
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience..
Check Stock

Calorbot 5 PCS FEP Film 200x260x0.15mm for Anycubic Photon Mono x 6k 4k/Elegoo Saturn MSLA Mono/QIDI Tech S Box/ 8.9 9.25 inch LCD UV 3D Printers

  • Fep Film Size & Wide Compatibility: (200x260mm.
  • Quantity: 5 PCS) FEP Release Film for Elegoo Saturn, Anycubic Photon Mono x 6k 4k, 8.9 inch UV 3D Printers, MSLA Mono, qidi tech s-box, Anucubic Photon..
  • Peeling Force: good peeling performance, meet the release requirement of various products, can be reused..
  • High transparency: UV transmittance is over 95%, which is perfect for printing and provides product quality..
  • Corrosion resistance: not affected by almost any strong acid, strong alkali, oxidant, and other solvents, Non-tacky, high cleanliness product surface provides product release and durability..
  • Easy to install and use: it is very easy to install according to the installation instructions. If you are not satisfied with our Fep Film Or service, we guarantee a full refund. Please Feb assured to buy..
Check Stock