ReviewsFerrous Metal

Stud Finder Wall Scanner, ENGiNDOT 5 in 1 Electronic Stud Sensor Detect Center and Edge of Stud with Wire Alarm, Depth Tracker, Unit Change, 3 Signal Lights, for Wood Beam Joist Metal Stud Detection

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This wall scanner has 2 wood scan modes with the upgraded smart chip that can precisely locate the center and edge of the wood stud. The exact wood scan is up to 0.75 in.(20mm) deep, the deep wood scan can through 2 layers of drywall up to1.5 in.(38mm) thick..
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live wire scan always working on. The ferrous metal scan is up to 3.15 in.(80mm) deep, the non-ferrous metal scan is up to 4 in.(100mm) deeper than normal, so you won't worry about drilling or hammering into a live wire, metal pipes, and cables..
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the time. Signal Lights show green when the detector calibration is ready and changes from yellow to red as you approach the center of the detected object. Easy to read and use with a large LCD screen..
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wa....
Check Stock

Katzco Magnetic Mini Tray Holders - 4 Pack Multi Color - Use in Garage, Home, Construction - for Nuts, Bolts, Washers, Iron, Nails, Screws, Sockets, Bits, Etc. - 4 Inch Diameter x 1-1/4 Inch Depth

  • HIGH QUALITY CONSTRUCTION- Heavy-gauge polished Aluminum construction Base bowl with strong magnetic built into the base- Includes 4 trays for more organizational flexibility, This bench top accessory keeps small parts accessible and all in one place..
  • HOLDS SMALL PARTS- The magnet parts bowl will hold any small steel or ferrous metal object. Keeps nuts and bolts, parts, and small tools within reach of work area..
  • RUBBER COATED BOTTOM -Base has a rubber bottom coated magnets to prevent marring of painted to finished surfaces , You can Mount The tray horizontal or even vertically or up-side-down..
  • IDEAL FOR STORAGE- Keeps small metal parts and tools from getting lost Great addition to any workshop Holds Small Parts securely, Helps prevent lost or misplaced parts, fasteners, and tools Screws for nuts, bolts, screws, nails, needles & thimbles..
  • EXTRA MAGANATIC- 4 1/4″ diameter Aluminum steel tray Hold Adheres to any ferrous metal surface Attach the bowl to any metal machine in your shop to hoods, fenders, or other ferrous metal surfaces Even works sideways and upside down..
Check Stock

Evolution Power Tools RAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw

  • No coolant required and produces virtually no sparks.
  • Cuts Wood, Ferrous Metal, Non-Ferrous Metal & Plastic.
  • Not Recommended: Hardened high carbon, coated and stainless steel. Note: Cutting galvanised steel may reduce blade life.
Check Stock

Imachinist S601314 Bi-Metal Metal Cutting Band Saw Blades 60-inch X 1/2-inch X 14 TPI

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi.
  • Perfect for cutting soft ferrous metal only.
  • 14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S52121214 Bi-Metal Band Saw Blades 52-1/2-inch X 1/2-inch X 14 TPI for Soft Ferrous Metal

  • Bi-metal type, HSS M42 grade, 52-1/2" long, 1/2" wide, 0.025" thick, 14TPI.
  • Perfect for cutting soft ferrous metal only.
  • 14TPI is suitable for cutting ferrous metal solid bar and tube.
  • Suits all bandsaws which use 52-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Makita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank

  • Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
  • 135 degree split point geometry for faster starts and reduced walking.
  • Impact rated: For use in 1/4 inches Hex impact drivers.
  • For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check Stock

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker

  • Zircon’s MS 740 is a multi-surface scanner with 4 modes that allow you to detect and mark the location of studs, metal and live AC wiring.
  • ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results.
  • Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists.
  • Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster.
  • AC Scan finds and traces live, unshielded electrical AC wires.
  • WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes.
  • Integrated erasable wall marker enables users to mark targets with the simple push of a button.
Check Stock

Zircon MetalliScanner m40 Handheld Electronic Metal Detector For Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More

  • Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep.
  • Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.
  • Works as a great stud finder for plaster walls, as well as finding rebar in concrete.
  • Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings.
Check Stock

Fisher Labs CZ-21 Quick Silver Underwater Metal Detector with 10-inch Coil, Black (CZ21-10)

  • Choice of Audio Alarm or Silent Vibrate Alarm.
  • Easy to Use, 3 Position Switch for Power, Audio and Vibrate.
  • Sensitivity Setting at Optimum Level – No Tuning Required.
  • Balanced and Lightweight – Under 12 oz.
  • Specially manufactured to work with the Fisher MScope Portable Walkthrough Metal Detector.
Check Stock

Ferrous Wheel Chemistry Ferris Fe+2 Nerd Science Lover Funny T-Shirt

  • Perfect for boys & girls who love funny science designs. It has a ferrous wheel, not a ferris wheel. It's a pun. Ferrous is a type of metal containing iron. Ferrous can be written Fe2+. Add this to your Christmas and birthday gift ideas..
  • Wear it proudly to the science fair, chemistry class or around smart people. Makes a great present for geeks and nerds who find science puns funny. This graphic is chemistry humor at it's best. Sizes available for men, women and children..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

NATOTINORCH Handheld Metal Detector Wand,High-Sensitivity Security Detector Wand, for Security Inspection, Detection of Various Electronic Products, Metal Products, Weapons, Knives Scanner

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • . LED alarm light on column, displaying the area of metal detected accurately..
Check Stock