ReviewsFiber Module Gbic

MikroTik RB260GSP

  • MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
  • The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
  • The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
  • The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
  • If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

QWinOut DIY F450 450mm Airframe 2.4G 6CH RC Quadcopter ARF Combo Full Set Drone with GPS APM2.8 Flight Controller (All Parts Included for Ready to Fly, Unassembly)

  • ...- Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedback module,users can get plane details in real time.   Make very setting clear and exactly output result..
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Great control distance: 1.1km on the ground, 2km in the sky.   Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.  High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.   Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology..
  • Pls note: Support Max 3-4S battery (Optional, only included in ARF Version).
Check Stock

QSFPTEK 10GBASE-ER SFP+ Module, 10giga Mini GBIC SFP 1550nm, 40km, 10GE Gigabit Ethernet DDM LC Single-Mode Fiber Optic Transceiver for Cisco SFP-10G-ER, Ubiquiti, Netgear, Mikrotik

  • Wide Compatibility: Compatible for Cisco SFP-10G-ER, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • 10GBASE-ER SFP+ fiber module: 10Gb/s data rate, duplex LC connector, 1550nm wavelength, the transmission distance up to 40km, working temperature: -5℃ ~ +70℃, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): ＜ -15.8..
  • Easy to use: SFP+ 10G single-mode transceiver, plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems..
  • 100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy..
  • We offer many compatible options, if your brands are not listed here, please contact us. QSFPTEK is a manufacturer of transceiver, customized service is available..
Check Stock

Linksys WMP54G PCI Wireless Adapter Refurbished

  • QUAD SFP+ ADAPTER: 4 ports on SFP+ network card can provide redundancy, or be aggregated for demanding applications.
  • TECH SPECS: 10 Gbps per port | 4 SFP+ Ports, MSA Compliant | Intel XL710| MMF & SMF Fiber Support | PCIe 3.0 x8 | PXE Boot | 9K Jumbo Frames | Link....
  • TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits to validate performance.
  • converged network adapter is compatible w/ leading servers like Dell....
  • FLEXIBLE: Use MSA compliant SFP+ module or direct attach cable (DAC) supporting different fiber types.
  • 10 Gigabit Ethernet NIC works w/leading brands....
  • WIDE HYPEVISOR & OS COMPATIBILITY: Fiber LAN card compatible w/Windows 7, 8, 8.1, 10.
  • Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019.
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

  • Fiber Type:1.25Gb/s Dual LC OM3 Fiber Module 4Pcs.
  • with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant..
  • Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
  • Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing..
  • Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches..
  • If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality trans....
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Liftmaster/Chamberlain/Sentex 41as050-1 Receiver Logic Board Assembly

  • There are 8 lighting modes for you to choose: 1: 2-8 function cycle,2: Star flash,3: Double flash,4: One way fades in and out,5: 4 single flashes, 4 double flashes,6: All fade in and out,7: 4 single flashes,8: All on..
  • It can be connected to a 1.2V nickel-metal hydride battery and a 2V solar panel. The maximum charge current is 400mA and the discharge current is 100mA..
  • Solar light string controller circuit board with power switch and lighting mode switch, easy to operate..
  • The controller module can be used for 100LED solar string lights, solar copper wire lights, solar studs and other lamps..
  • The solar light string controller module is made of glass fiber material, with fine workmanship and durability..
Check Stock

Mini HD SDI Fiber Extender 1080P HD-SDI Over Fiber Converter Broadcast Level SDI Video Optical Transceiver Single-Mode Single Fiber 20km with RS485 Tally and Loop Output

  • HD-SDI Video: The SDI Fiber converter support HD-SDI with 8-channel audio embedded, resolution up to 1080P&30HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s..
  • Support Rs485&Tally: The HD SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast..
  • Compact Size: The SDI Fiber Extender only 1.7*0.9*2.8 inch in size, it’s so small and can install on cameras..
  • Loop output: The HD-SDI Fiber Optic transceiver support loop output, you can see the image easily in local side..
  • Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource..
Check Stock