ReviewsFiber Optical Patch Panel

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..

Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

...Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected....

Check Stock

FiberCablesDirect - 2.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 2.5 Meter (8.20ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

Fiber Cable Description: OM4 LC LC Fiber Patch Cable 2.5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 2.5 Meter (8.20 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR....

Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

Fiber Cable Description: OM4 LC LC Bend Insensitive Plenum Fiber Patch Cable 3M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Bend Insensitive, Plenum, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | ....

Check Stock

FiberCablesDirect - 3M OM2 LC LC Fiber Patch Cable | 1Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lcupc sfp 1gbase mmd dx PVC ofnr lc-lc

...inforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 – Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
OM2 Fiber Network Bandwidth: 1500MHz-km @ 850nm / 2000MHz-km @ 1300nm. Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for saf....

Check Stock

CableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)

Premium quality LC to LC single mode fiber patch cable for connecting singlemode optical networking devices in datacenter applications. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects..
Only Corning glass is used in CableRack brand singlemode fiber LC to LC fiber jumpers. You’ll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. OS2 is reserved for loose tube applications over bridges and between buildings. OS1 is for shorter lengths between network devices. The glass fiber insde OS1 and OS2, however is identical..
All CableRack fiber optic patch cable LC to LC are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. We carry LC single mode patch cables in a varienty of lengths and connector options in our Amazon store. Simply click on our brand name above to view all available products..
Single mode LC to LC fiber patch cable solutions are critical to high speed network solutions in the datacenter. These ....

Check Stock

LC/UPC Fiber Optic Attenuator 5dB, in-Line Attenuator, Male/Female, Single-mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB, 10 Pack

Connector/Connection Polish: LC/UPC Male to LC/UPC Female, 10 Pack.
Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable..
Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
Feature: Light weight, small volume, high accuracy, good stability and convenient operation..

Check Stock

FiberCablesDirect - 3M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb lc-lc mmf lc-upc sfp 1gbase mmd dx pvc ofnr

...inance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and ....

Check Stock

Patch Panel 24 Port Cat6 with Inline Keystone 10G Support, Rapink Pass-Thru Coupler Patch Panel UTP 19-Inch with Removable Back Bar, 1U Network Patch Panel for Cat6, Cat5e, Cat5 Cabling

...wn keystones patch panel 24 port and 110 punch blocks..
【Easy expansion and repaire】Its patch panel holder allows easy input and output cat6 coupler. Therfore, convenient to repaire when 1 port network broken. Meanwhile, if need expand in the future, you can easliy replace cat6 coupler with other coupler such as fiber adaptor, coax coupler, HDMI, VGA and so on..
【10G speed via Gold plated pins】 All 8P8C of rj45 jack panel keystone are golden plated to support better network connection up to 10G speed Ethernet network. This is a well made keystone panel and can be used as cat6 patch panel to upgrade cat6 network..
【Detachable back bar included】This patch panel wall mount contains thick steel detachable back bar. With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid keystone loose and the occurrence of network failures caused by the loosening and deformation of the cable. What you get?24 pcs sturdy cat6 coupler keystone loaded patch panel wall mount, removable cable back bar, screws, tie wraps..

Check Stock

PacSatSales - Fiber Optic Patch Cable - Single Mode - SIMPLEX - OS1-9/125um (1M, LC to SC)

COMMERCIAL GRADE CABLES – Our Industry proven Single mode Fiber patch cable range are perfect for the demands of Fiber Professionals..
QUALITY RATED – This Singlemode fiber meets all UL, cUL, IEC & RoHS standards. Our SM SX fiber patch cables are OS1 9/125 – ideal for all Single-mode fiber networks including CATV type FTTH, FTTB & FTTP systems..
RELIABLY TESTED – Every Optical fiber cable is tested for insertion loss to ensure a high quality end product. We rely on these network patch cables for use within our clients fiber networks across the USA..
PRODUCT DETAILS – Connector range includes – SC/APC, UPC, LC, FC, SC, ST FC/APC ends. Mode: 9/125μm. Wavelength: 1310nm to 1550nm. Jacket Material: PVC (default)/LSZH/OFNP. Jacket Color: Yellow. OD: standards 2.0/3.0 (default)/0.9/3.0mm.
TRUSTED SUPPLIER – Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems..

Check Stock

SpeedyFiberTX – 6-Pack 1 Meter LC to LC Fiber Patch Cable, Corning SMF-28 Singlemode 9/125um Ultra Optical Fiber(OS1/OS2 Compatible), Duplex, Yellow Riser OFNR Cable Jacket

Cable manufactured with industry-leading Corning SMF-28 Ultra Optical Fiber, durable high-quality LC duplex fiber optic connectors and industry standard flammability rating Riser OFNR PVC 2.0mm zipcord cable jacket.
Corning SMF-28 Ultra Optical Fiber is an ITU-T Recommendation G.652D compliant optical fiber with Corning’s enhanced low-loss and bend fiber technologies | This full-spectrum fiber has bend performance that exceeds the ITU-T Recommendation G.657.A1 standard and still splices the same as the installed base of standard single-mode fibers such as SMF-28e+ fiber.
SMF-28 Ultra Optical Fiber combines the benefit of industry-leading attenuation and improved macrobend performance, all in one fiber | This premium single-mode fiber is designed for regional, long-haul, metro, access, mobile, and fiber to the home (FTTH) applications, along with being fully backward compatible with the installed base of legacy single-mode fibers.
High Quality Fiber Patch Cable for Storage Area Network and Data Networks and Connects to SFP Transceivers, Ethernet Switches and Media Converters.
High Quality Guarantee: 100% Inspection and Test on Insertion Loss and Return Loss.

Check Stock