ReviewsFiber Power Meter

Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester

【Electricity Usage Monitor, Extension Cord】you can virtually monitor standby or working power dissipation of all your electronics. Monitor which appliances are the high cost of energy. save energy, money, Reduce CO₂emissions, environmental friendly,etc.electrical usage monitor.
【Upgrade Blue Backlit LCD Display】The digital large backlit LCD display screen is 180° full wide view clear visible, make you easy to read and record the data, especially in the darkness.power consumption meter.
【Overload Protection】 When the whole power exceeds the rated power 1650W of monitor, LCD will display.watt plug meter.
【Various Parameters Measurement】CO₂ Emissions(CO₂/KG), Power(W), Energy (KWh), Voltage/Hertz, Amps/Hertz, Power Factor, Minimum power and Maximum power, 8 modes for your choice.kilowatt meter.
【Data Hold Function】Electricity Usage Monitor will save the last datas when you remove the appliance from power meter or remove the power meter from the socket.
If you're not satisfied with it, please feel free to contact, We take full responsibility for product quality.plug in amp meter.

Check Stock

1M-8G RF Power Meter Power Attenuation Set Digital Display Signal Strength Module Radio Frequency Power Meter

Large Range: The measuring power range of this RF power meter is -60～-5 dBm (External RF attenuator can be extended to 100dBm), and the frequency range is up to 8000MHz..
Specific Feature: The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
Clear Display: This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
Standard Structure: The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
Quality Assurance: The RF power meter has been inspected many times before it leaves the factory to confirm the quality..

Check Stock

FiberCablesDirect - 3M OM2 LC LC Fiber Patch Cable | 1Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lcupc sfp 1gbase mmd dx PVC ofnr lc-lc

Fiber Cable Description: OM2 LC to LC Fiber Patch Cable 3 Meter | 1Gig Duplex LC LC Multimode Fiber (MMF) Patch Cable, Corning 50/125um core/cladding, 1.25 ceramic ferrule LC connectors for reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 – Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm ....

Check Stock

FiberCablesDirect - 3M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb lc-lc mmf lc-upc sfp 1gbase mmd dx pvc ofnr

Fiber Cable Description: OM1 LC to LC Fiber Patch Cable 3 Meter | 1Gig Duplex LC LC Multimode Fiber (MMF) Patch Cable, Corning 62.5/125um core/cladding, 1.25mm ceramic ferrule LC connectors. Reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300....

Check Stock

Rsrteng A86 CCTV Tester IP Camera Tester 8MP CVI TVI AHD Camera Tester 7inch TFT Touch Screen IPC Tester Support POE RS485 PTZ Digital Multi-Meter Optical Power-Meter

...aud 150-19200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc..Support Coaxial PTZ control and call OSD menu,Digital zoom,Full screen display..
【Multi-function tester】OPM --- Used to measure absolute optical power or relative loss of optical power through a section of optical fiber.TDR --- Testing the length of network cable (4 pairs),The maximum length of the measured cable is 130-200 meter.DMM- you can detect current and voltage data through a digital multimeter..
【Power & Quality Assurance】12V/2A output Interface,equipped with two battery compartments.Each battery compartment can hold a dedicated lithium battery pack with capacity of 18.5Wh.(can operate with single battery)After charging 3~4 hours,normal working time about 10 hours. We offer 24h technical support and 1 year warranty. If there are any issues, pls feel free to contact us..

Check Stock

RF Power Meter, 1-600MHz -60～-5 dBm Settable Power Attenuation Digital Display Of Signal Strength, RF Logarithmic Detector Amplifiers

The measuring power range of this RF power meter is ‑60～‑5 dBm, and the frequency range is up to 600MHz.
The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
The RF power meter has been inspected many times before it leaves the factory to confirm the quality..

Check Stock

Upgraded Watt Meter Power Meter Plug Home Electricity Usage Monitor, Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Meter Tester with Backlight, Overload Protection, 7 Modes Display

【Various Monitoring Parameters】: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time..
【Upgraded LCD display】: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers. Backlight time: 10 minutes..
【Overload protection】: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function"....

Check Stock

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657).
NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter：100-1000μm, Cladding Diameter：80-150μm..
【5” TFT DISPLAY】- It adopts 5-inch 800x480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine.
【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railwa....

Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..

Check Stock

Training and Racing with a Power Meter

【Make Every Ride Count】The AROFLY Link A1 includes Power Meter + Cadence Sensor to pair with your current bike computer to offer ride insights to optimize your performance for competition or training. Connected to your bike computer via ANT+ / Bluetooth, LINK Transmitter allows you to focus on your speed, power output, or any ride data when it matters the most..
【Lightest Wheel-Based Power Meter】AROFLY Power Meter is capable of measuring your accurate output while only being the size of a bottle cap, weighing less than 0.3 ounce. AROFLY Power Meter is directly installed to cycle rear valve (Only for CLINCHER tires) to monitor how the output from either of your legs change along the ride and keep you focused on your performance..
【Patented Dynamic Pressure Variation Sensing Technology】The AROFLY Power Meter measures your ride power output by monitoring the variating tire pressure and other measurements combined. This is the first ever wheel-based power measurement system for accurate output recording..
【Simple installation】Complete installation in under 10 minutes with no tools required, no modification to your drivetrain. Package contains LINK A1 Transmitter, Cadence Sensor and Power Meter, suitable for most types of bike tires, includin....

Check Stock

3 Phase Power Meter DTM024 Digital LCD Display Energy Meter Electric Kilowatt Hour Meter, 220/380V 5-80A

WITH TRANSPARENT SHELL-- This power meter adopts transparent shell, which is convenient to observe the operation status of electronic components inside the meter..
LCD DISPLAY WITH BACKLIGHT-- This energy meter is equipped with LCD backlight display is used to read data clearly, convenient to operate..
LOW POWER CONSUMPTION-- The power consumption of the product is very low, saving money. The theoretical power consumption is less than or equal to 2 W..
HIGH STABILITY-- The kilowatt hour meter has stable performance and can run steadily in the range of -20-55 degrees Celsius..
APPLICATION-- 3 phase electric power meter can be widely used in power metering systems, standard: IEC62052-11 IEC62053-21..

Check Stock