ReviewsFiberglass Epoxy Products

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

MagicEzy 9 Second Chip Fix - Oyster White - All-in-One Fiberglass Repair Filler for Boats and Fiberglass Gelcoat - Strong Marine Epoxy Putty - Lifetime Durability

  • FIBERGLASS CHIP REPAIR MADE EASY: One-part epoxy repair filler to fix fiberglass boat damage.
  • It’s a complete fiberglass repair kit for boats in one....
  • EASY GELCOAT REPAIR KIT: Just clean, apply, level and wipe away smears.
  • Fixes chipped fiberglass and deep cracks in seconds..
  • This fiberglass repair product is available in most popular boat gelcoat colors.
  • Use it on all ‘above the waterline’ areas of boats, ceramic cracks or porcelain chips, carbon fiber, aluminum, PVC, acrylic and....
  • ULTRA TOUGH – LIFETIME DURABILITY PROTECTION.
  • Nanotechnology inside this marine epoxy repair filler penetrates deep into pores.
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

PAINT2FIX Touch Up Paint for Tesla - Pearl White PPSW | Shasta White | White Water | Scratch and Chip Repair Kit - Bronze Pack

  • FIBERGLASS CHIP REPAIR MADE EASY: One-part epoxy repair filler to fix fiberglass boat damage.
  • It’s a complete fiberglass repair kit for boats in one tube..
  • EASY GELCOAT REPAIR KIT: Just clean, apply, level and wipe away smears.
  • Fixes chipped fiberglass and deep cracks in seconds..
  • This fiberglass repair product is available in most popular boat gelcoat colors.
  • Use it on all ‘above the waterline’ areas of boats, ceramic cracks or porcelain chips, carbon fiber, aluminum, PVC, acrylic and plastic..
  • ULTRA TOUGH – LIFETIME DURABILITY PROTECTION.
  • Nanotechnology inside this marine epoxy repair filler penetrates deep into pores.
  • It’s non-toxic, water resistant, and non-hazardous..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

TotalBoat 5:1 Epoxy Resin Kit (Quart, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5 to 1 marine epoxy resin and hardener to complete a variety of boat building and epoxy repair projects For wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel and lead Not for clear-coating projects.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics Self-leveling properties ideal for coating and laminating Combine with fillers to make a high-strength, moisture-resistant fairing compound, filleting material or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 min at 75F for Fast Hardener, to 20 minutes at 75F for Slow Hardener Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.
Check Stock

9XW Fasco Epoxies - Steelflex White - Gallon Kit

  • A two-component epoxy coating designed to adhere strongly to wood, aluminum, galvanized surfaces and fiberglass materials after many months of hard use..
  • Strong Abrasion and Impact Resistant Epoxy Coating Perfect for stopping leaky rivets in aluminium boats.
  • 1 Gallon does approximately 120 square feet Dries to a white finish.
  • Epoxy Coating for pretty much any surface except plastic Protects against impact from rocks and debris..
  • Fasco Has been Manufacturing Epoxy compounds and coatings since 1957 Made in the USA.
Check Stock

Woolsey Premium Epoxy Pool Paint

  • High solids, satin finish: Woolsey Premium Epoxy Pool Paint is a superior, high solids, satin finish, epoxy coating for your pool or spa. This product cures to a hard, tough, durable finish that provides excellent protection against stains, chemicals, and abrasions..
  • Offers smoothing qualities on rough surfaces: Woolsey Premium Epoxy Pool Paint is easy to apply and builds up to 8 mils thick per coat, creating a smooth finish, even on rough surfaces. Woolsey Premium Epoxy Pool Paint can be used on concrete, plaster and fiberglass pools, spas, and slides..
  • Up to 8 years service life: Two coats of Woolsey Premium Epoxy Pool Paint can offer up to 8 years of service life, allowing you to spend more time enjoying your pool and less time doing maintenance on it..
Check Stock

1708 Fiberglass 45/45 DBM Biaxial 50\ Inch Wide - 9 FEET Long - 3 Yards

  • Boat Hull Construction And Wood Reinforcing Fiberglass.
Check Stock