ReviewsFiberglass Pipes

Epoxy Putty Stick XUDOAI 100g Hard and Fast Repair Epoxy Glue Metal Plastic Glass Ceramic Multi-Purpose Cracks Repair Fills for Quick Fixes

  • ✔ After kneading evenly, it is used to seal the leakage of pipes, drainage pipes, flowerpots, faucets, etc..
  • ✔ Can bond a variety of materials, including metal, wood, glass, ceramics, fiberglass, stone and many hard plastics. Used for filling and repairing..
  • ✔ Easy to use: Simply cut, hand knead until color become uniform and apply to damaged area then all you do is let It dry..
  • ✔ 3-5 minutes: mixing time, mixing evenly. 5 minutes to 24 hours: long curing time and rapid increase of hardness. After 24 hours: completely....
  • ✔ The working temperature of the product is between - 50 ℃ and 120 ℃, and the rest is kept in a dry and cool place..
Check Stock

YEZIZ Sewer Camera Auto Self Leveling 512hz Locator Sonde Camera Pipe Inspection Camera Drain Sewer Meter Counter Camera 10 Inch Monitor Long (Cable Length : 50m, Color : Black)

  • The Drain Sewer Pipeline Industrial Endoscope System with HD 1000TVL high-definition waterproof IP68 #304 stainless steel camera+tipped probe+145°wide viewing angle what make it clear when you inspect some places hard to watch.12 pcs adjustable LEDs to illuminate the hard-to-reach inspection area.Inspections will be seen more clearly in the dark environment..
  • MONITOR&CABLE：Professional Drain PipeSewer Pipeline Inspection Camera is designed with a 10 inch color TFT LCD monitor with a sun-visor for outdoor inspections.The material of wire is fiberglass rod(diameter: 4.9MM),anti-corrosion/cold/tensile..
  • METER COUNTER:Simultaneous display/cleared Metric and Feet..
  • 512HZ TRANSMITTER:This transmitter is suitable for locating the damage place of underground pipes, air-conditioning pipes and other pipes, Video Auto balance Auto Self Leveling 512HZ Transmitter Pipe Locator ,will work with any 512Hz receiver.
  • PORTABLE CARRY CASE&LONG BATTERY：Pipe Wall Sewer Inspection Snake Camera Kit with heavy duty padded aluminum case stores all contents convenient to carry around. 12V 4500mAh Li-battery included supports approximate 8 hours of continuous use..
Check Stock

Dicor 501LSW-1, RV Rubber Roof Sealant Self Leveling Caulk, White, 4 Pack

  • Creates a secure, secondary seal along the roof’s edges, air vents, vent pipes and screw heads.
  • Adheres firmly to aluminum, mortar, wood, vinyl, galvanized metal, fiberglass and concrete.
Check Stock

lanlanmaoyimg Endoscope Auto Self Leveling 512hz Locator Sonde Camera Pipe Inspection Camera Drain Sewer Meter Counter Camera 10 Inch Monitor Long Carrying Case, Detachable Snake Camera, Black, 30m

  • The Drain Sewer Pipeline Industrial Endoscope System with HD 1000TVL high-definition waterproof IP68 #304 stainless steel camera+tipped probe+145°wide viewing angle what make it clear when you inspect some places hard to watch.12 pcs adjustable LEDs to illuminate the hard-to-reach inspection area.Inspections will be seen more clearly in the dark environment..
  • MONITOR&CABLE：Professional Drain PipeSewer Pipeline Inspection Camera is designed with a 10 inch color TFT LCD monitor with a sun-visor for outdoor inspections.The material of wire is fiberglass rod(diameter: 4.9MM),anti-corrosion/cold/tensile..
  • METER COUNTER:Simultaneous display/cleared Metric and Feet..
  • 512HZ TRANSMITTER:This transmitter is suitable for locating the damage place of underground pipes, air-conditioning pipes and other pipes, Video Auto balance Auto Self Leveling 512HZ Transmitter Pipe Locator ,will work with any 512Hz receiver.
  • PORTABLE CARRY CASE&LONG BATTERY：Pipe Wall Sewer Inspection Snake Camera Kit with heavy duty padded aluminum case stores all contents convenient to carry around. 12V 4500mAh Li-battery included supports approximate 8 hours of continuous use..
Check Stock

Midwest Hearth Poly Chimney Cleaning Brush (8-Inch Round)

  • POLYPROPYLENE BRUSH - Stiff poly bristles clean coal and soot from metal stove pipes, flue, and chimneys.
  • GALVANIZED STEEL STEM - Heavy duty double-spiral stem for long-lasting durability.
  • 1/4 INCH NPT FITTINGS - Features 1/4" male pipe threads for use with our fiberglass rod kits (sold separately).
  • PROFESSIONAL QUALITY - Superior components provide excellent performance.
  • MADE IN USA - Quality manufactured in the Midwest!Description Chimneys should be cleaned at least once a year, and more often if you use your fireplace frequently. Midwest Hearth Poly Chimney Brushes are designed to be used with metal chimney flue to help prevent scratching and marring of the steel pipe. Measure the inner diameter of your flue and order the same size brush: 6" Round or 8" Round. Our chimney brushes are professional quality and feature stiff polypropylene bristles and a heavy duty galvanized steel stem. The brush will have 1/4-Inch male pipe threads at the end that may be attached to extension rods. Midwest Hearth offers an 18-Foot fiberglass rod extension kit that is compatible with these brushes (sold separately)..
Check Stock

HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat

  • ...thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • ...thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

  • J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
  • Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • ...off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • ...off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

CJGQ Greenhouse Hoops, Garden Hoops for Raised Beds, Garden Grow Tunnel Up to 8 Set of 7Ft Long Rust-Free Garden Hoop for Row Cover Plant Cover, 40Pcs Plant Support Growing Frame for Netting

  • 【PREMIUM QUALITY & GOOD TOUGHNESS】Made of upgrade solid fiberglass, Our greenhouse hoops are durable and flexible, which would not easy to be broken after multiple bending. The connectors are made of superior steel and will not rust easily. Both of them could be used season after season. Both film clamps and the twist tie could hold the plant and grow tunnel sturdy to resist the bad weather condition..
  • 【PROTECT YOUR PLANT】Garden Hoop would be perfect for plant cover, row cover, provides an ideal safety environment for rapid germination and growth of plants. They could protect plants from being attacked by bad weather like heavy rain, snowstorm and insects, birds. Our plant twist ties could makes a great support for vines, shrubs, flowers or other plants, help them grow in the right direction and secure them. Garden hoops for raise beds could be used in yard, garden, indoors or outdoor..
  • ☘️【EASY TO ASSEMBLE】1.Insert the one side of detachable garden hoops for netting into the soil. 2.Connect fiberglass pipes with connectors, you can DIY a suitable growing tunnel for your plants according to your needs. 3.Bend the house hoop then insert another si....
Check Stock