ReviewsFiberglass Reinforced Polymer Rebar

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

MYCS Mushroom Rebar Cap (25 Pack) - Rebar Size: #3-#7, 10M - 25M

  • ✅USA's #1 Premium Concrete & Rebar Manufacturer, Distributor & Supplier.
  • ✅Rebar Mushroom Cap - Orange plastic caps to prevent abrasion and small injuries, from protruding steel rebar pieces.
  • ✅Construction Safety Rebar End Cap - For Workplace Protection NOT for Impalement Protection.
Check Stock

KEILEOHO 100 PCS Rebar Safety Caps,Yellow Plastic Mushroom Rebar Cap End Identification Bar Mushroom Building Construction Site Supplies Rebar Size: #3-#7, 10M - 25M

  • 100PCS MUSHROOM REBAR CAP - Widely used safety product that is used inside the construction industry to cover exposed rebar poles to prevent injuries..
  • REBAR SAFETY CAPS - Easily fits over exposed rebar poles to prevent rebar wear and damage..
  • YELLOW MUSHROOM CAPS - Yellow is a prominent color with high visibility..
  • HIGH QUALITY & WIDE APPLICABILITY - Made from durable plastic, Durable and suitable for construction sites. The rebar caps suitable for size:#3-#7, 10M - 25M steel bars..
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our Rebar Safety Caps, you can return the product and get a refund within 30 days from receiving. Just remember that your satisfaction is our first priority..
Check Stock

Spyderco Ladybug 3 Salt Lightweight Folding Knife with 1.93

  • LADYBUG 3 - Spyderco Ladybugs come in a diverse collection of handle and blade materials. Our Ladybugs have a common denominator: they're small, innocuous, cut like the devil, carry well on a keychain and become a tool for everyday life..
  • FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • PLAINEDGE - A sharpened knife blade with no serrations or teeth sometimes referred to as a smooth blade..
  • SPECIFICATIONS - Closed Length (Inches): 2.48, Overall Length (Inches): 4.41, Blade Length (Inches):1.93, Blade Steel: H-1, Grind: Hollow.
Check Stock

BAK BAKFlip F1 Hard Folding Truck Bed Tonneau Cover | 772108 | Fits 2002 - 2013 Chevy/Cadillac Avalanche/Escalade EXT

  • Fits 2002 - 2013 Chevy/Cadillac Avalanche/Escalade EXT.
  • When you need to load furniture or other large items in your bed, simply fold the F1 toward your cab and fasten the support struts.
  • A water drainage system incorporated into the tonneau cover channels liquids off the F1 and into drainage tubes that exit through your bed, keeping your cargo safe and dry.
  • You can install the F1 with a wrench and socket. No drilling is necessary.
  • The panels on the F1 are made of fiberglass reinforced polymer (FRP), a lightweight and heat-resistant material that is virtually dent proof.
Check Stock

BAK BAKFlip F1 Hard Folding Truck Bed Tonneau Cover | 772329 | Fits 2015 - 2020 Ford F-150 5' 7' Bed (67.1')

  • Fits 2015 – 2020 Ford F-150 5′ 7″ Bed (67.1″).
  • When you need to load furniture or other large items in your bed, simply fold the F1 toward your cab and fasten the support struts.
  • A water drainage system incorporated into the tonneau cover channels liquids off the F1 and into drainage tubes that exit through your bed, keeping your cargo safe and dry.
  • You can install the F1 with a wrench and socket. No drilling is necessary.
  • The panels on the F1 are made of fiberglass reinforced polymer (FRP), a lightweight and heat-resistant material that is virtually dent proof.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

BAK BAKFlip FiberMax Hard Folding Truck Bed Tonneau Cover | 1126601 | Fits 2005 - 2015 Honda Ridgeline 5' Bed (60\)

  • Fits 2005 - 2015 Honda Ridgeline 5' Bed (60").
  • The panels are held in place by an automatic latching system. When you need to open the cover, use the strings located on either side to release the latches and fold the cover up.
  • The FiberMax is built using FRP (fiberglass reinforced polymer) panels. This material is highly resistant to dents and scratches.
  • The FiberMax can be installed with a wrench and socket. Leave the drill in your toolbox.
  • The cover can be opened up to your truck's bulkhead when you need to carry oversize cargo. Struts hold the cover in place so you can drive safely with the cover open.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock