ReviewsFiberglass Tanks

1.5 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50\ Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins

  • SUPERIOR RELIABILITY AND STRENGTH: The Gator Patch protects and repairs kayaks, canoes, stand up paddleboards and small boats. Bonding to fiberglass, aluminum, wood or plastic surfaces, it shields your marine investment from everyday boating hazards..
  • EASY INSTALLATION: Simply prep, peel, stick and cure in the sun for up to one hour making your patch 500 PSI strong, permanent and ready to use! For a finished look, sand and paint to match your watercraft..
  • EXCEPTIONAL QUALITY: Combined strength of polyester resin and fiberglass with a UV light activator makes our patch kit watertight and impenetrable. Perfect in or out of the water! Great for Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more!.
  • CONVENIENTLY DESIGNED: With three sizes to choose from you can easily find the repair kit that suits your needs. Angled and curved surfaces? No problem! Moldable around curves, edges, dents or joints and perfect for any emergency repair..
  • MADE IN THE USA: With over 25 years of experience, we take customer satisfaction seriously! If our Reinforced Repair Gator Patch doesn’t meet your expectations, we proudly stand behind our product with our 100% Satisfaction Guarantee!.
Check Stock

Wayside Pond

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

PermaShine - Reusable and Helium Free Balloon Bouquet - Permanent Plastic Indoor and Outdoor Balloons

  • ...ckets are great for any indoor party, celebration, or retail event. The Vertical Screw Bracket is perfect for mounting to fences, signs or uprights, adding color and attention to your sidewalk or storefront..
  • ► FULLY CUSTOMIZED KIT INCLUDES: (4) PermaShine 13" Reusable Plastic Balloons of Your Choice, (1) 35" Long Fiberglass Stem, (3) 27" Short Fiberglass Stems, (4) Holding Cups, (1) Mounting Option of Your Choice, and (1) Inflation Needle.
Check Stock

DURALUX Marine Enamel, White, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
Check Stock

US Energy NASATECH "Non Fiberglass" Up to 80 Gallon Water Heater Insulation Jacket Kit (42sqft) (Made in the USA) Includes: Reflective Foam Core Insulation & Aluminum Foil Seam Tape

  • Save Money, Energy and Help the Environment!!! SAVE 2x MORE WITH OUR PRODUCT!!! 1/4inch THICKNESS!!!.
  • R-VALUE 7.2!!! Reduce Heat Loss by 40% !!! Recover Your Investment in a few month!!!.
  • Fits All 20 to 80 Gallon Tanks / Fits Gas or Electric Water Heater (42sqft material) = 4ft x 7ft / 2ft x 7ft.
  • Easy to Install and Easy to Clean , Contains no Fiberglass, Non toxic / Non carcinogenic.
Check Stock

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

  • J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
  • Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
Check Stock

Epoxy Putty, Repair Epoxy Putty Stick Metal Filler Pipe Repair Hard Plastic Ceramic Fibreglass Stone Glass Hole Filler, Bonding Leaks Putty Repair Waterproof Quick Fixes

  • ✔Used to repair pipes, water tanks, fuel tank leaks, industrial maintenance, tool crack repair, flooring, door seams, auto parts, swimming pool ceramic decoration, etc..
  • ✔Suitable for a variety of materials, including metal, wood, glass, ceramic, fiberglass, stone, marble and many hard plastics, temperature: -50 degrees to 120 degrees..
  • ✔Easy to use: 6 * 5g individually packaged, no need to cut, evenly according to the amount, fill the repair area, can be polished, painted, colored after curing..
  • ✔0-10 minutes: Mixing time, finish kneading and use. 10minutes-24 hours: curing time, the hardness increases rapidly. After 24 hours: completely hardened and permanently fixed..
  • ✔High-quality materials: Good insulation after curing, do not soften when exposed to water, no food contact..
Check Stock

Clscea Aquarium Auto Top Off System Water Filler Compensator Blue

  • Great for nano tanks, use with the principle of differential pressure to automatically refill water, simple and practical. You need to prepare....
  • Built-in noise reduction device can effectively reduce noise. (Note: not completely silent)..
  • Screw-free, no damage to the tanks. Made of corrosion-resistant ABS material, which is also usable in saltwater. The length of the tubing (manually....
  • Suitable for tanks with 3-10mm /0.12-0.39in wall thickness. Note: Incompatible with rimmed tanks and curved fish tanks.
  • A reliable gadget during business trips or travel. Compatible with fish tank, tortoise tank, planted aquarium, saltwater aquarium, etc. For tanks....
Check Stock

Poly Welder Pro Polyethylene Welding Strips - 5-feet (Natural)

  • These LDPE polyethylene strips are 12" long and approximately 1/16" thick and 3/8" wide.
  • The colors of these strips will match many applications like plastic water tanks, canoes and kayaks.
  • Can be used to repair most water tanks like Norwesco, Poly-Mart, Ace, Snyder, Dura-cast, etc..
  • Also used to repair windshield washer bottles, radiator overflow tanks, ATV fenders, watercraft.
  • Use to repair motor home water tanks, dirt bike fenders, gas tanks and agricultural water tanks.
Check Stock

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

  • ... And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
Check Stock