ReviewsFibre Braided Rubber Hose

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

6AN 3/8 Fuel Line Hose Nylon Stainless Steel Braided CPE Oil Gas Automotive Replacement Fuel Hoses 10FT(3m) Shineyoo

  • Safety performance: Excellent flame retardant, Outer braided has long service life, excellent inflaming and safer to use, to Ensure reduce the possibility of hose burst..
  • Upgrade Material: Using high-quality nylon fiber and stainless steel wire materials to replace the ordinary, More Flexible and More Wear-resistant..
  • Universal Application: Can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel..
  • Product Specification: inner hose: CPE synthetic rubber.
  • The middle layer: 304 stainless steel wire mesh sleeve.
  • The outer layer: High quality braided nylon,Working Temperature: -40 ℃ to +148.9 ℃.
  • Warming Notes: AN6, Length: 3m/ 10ft, Outside Diameter:0.55inch (14.22mm), Inner Diameter: 0.34inch (8.71mm). Please double check the hose size before bidding, and Professional installation is highly recommended..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

SAGUD Airbrush Hose 10 Foot Nylon Braided Air Hose with 1/8” Size On Both End and Adapter 1/8” male - 1/4” female for Most Airbrush Kit…

  • SAGUD Air brush hose is nylon braided outside and rubber inner with blue, black color, on both end is G/8”- G1/8”. The airbrush hose adapter is G1/8 male – G1/4 female..
  • This air hose has Standard 1/8" BSP male and 1/8" BSP female fitting. No more leak performance, 1/8" BSP for airbrush, 1/8" BSP for air compressor..
  • The rubber nylon airbrush hose is not affected by the season, It does not harden in winter or summer..
  • The length of this air hose is 10 foot (3m)..
  • GUARANTEE AND PROBLEM: Each item is test by inspection department to keep the goods is good working condition in your hand. Any problem we will provide the quickly reply..
Check Stock

NQN Upgraded 12 FT 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, QCC1 x 3/8" Female Flare Fitting with 3/8 Flare x 1/8 MNPT, Stainless Braided Propane Hose

  • 【NQN Upgraded QCC1 Adjustable Propane Regulator】NQN 12FT Stainless Braided Propane Hose Adapter use the pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA). This Pressure Gauge help you read and control the heat with a precise level of accuracy. Come with a brass orifice connector 3/8 Flare MNPT x 1/8 MNPT. This orifice can be for pipe fitting, grill, propane burner, propane heaters and all propane appliances that share the fittings..
  • 【Premium Material】NQN 12FT Stainless Braided Propane Hose Adapter is made of durable stainless steel braided, with weather resistance, anti-corrosion, anti-aging, air tightness, heat-resistance, flexibility features, which defeat ordinary rubber that ages in the sun. Durable solid brass provides secured connections between grill and turkey fryer or burner and tank. This Propane Hose ensures secure, air tightness and stability..
  • 【Standard Fitting & Wide Application】12 Feet 0-30 PSI High Pressure Stainless Steel Hose with 3/8” female flare fitting, fit for gas grills, gas stoves, burners, turkey fryers, cooker, smokers, fire pit and heater, hot water heater, as lon....
Check Stock

POHIR Power Washer Hose 125FT, High Pressure Washer Hose with 3/8'' Quick Connector, High Tensile Wire Braided Hose with 2 Quick Connect Kits Compatible M22 14 mm, Hose for Pressure Washer 4200 PSI

  • Pressure Washer Hose125 FT - The pressure washer hose 125 feet is high tensile wire braided, it's durable and able to support quite high working pressure. Inner tube is reinforced with synthetic rubber. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use..
  • Pressure Washer Hose 4200 psi - MAX working pressure of this high pressure washer hose can reach 4200 PSI. The burst pressure is up to 16000 PSI. Max working temperature is 140℉/60℃. Flow rate is 2.5 GPM to 5 GPM. It's designed to be compatible with most brands of power washers..
  • 3/8 Quick Connect Pressure Washer Hose - The pressure hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked. Warm tips: it's a pressure hose, not a garden hose. Suitable for pressuer washer only..
  • Kink Resistant Pressure Washer Hose - The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance. It's easy to carry, drag and roll up. Warm Tips: For ease of movement and storage, please lay the hose flat to its full length when using it for the fir....
Check Stock

SAGUD Airbrush Hose 6 Foot Nylon Braided Air Hose with 1/8” Size On Both End and Adapter 1/8” Male - 1/4” Female for Most Airbrush Kit…

  • SAGUD Air brush hose is nylon braided outside and rubber inner with blue, black color, on both end is G/8”- G1/8”. The airbrush hose adapter is G1/8 male – G1/4 female..
  • This air hose has Standard 1/8" BSP male and 1/8" BSP female fitting. No more leak performance, 1/8" BSP for airbrush, 1/8" BSP for air compressor..
  • The rubber nylon airbrush hose is not affected by the season, It does not harden in winter or summer..
  • The length of this air hose is 6 foot (1.8m)..
  • GUARANTEE AND PROBLEM: Each item is test by inspection department to keep the goods is good working condition in your hand. Any problem we will provide the quickly reply..
Check Stock

Appliance Pros Washer Inlet Hoses Reinforced PVC Pack Qty-1 6 Foot

  • MULTI-LAYER DESIGN - Each washer hose features a rubber, PVC, outer protective coating. The braided design allows for mobility when edging into....
  • ENGINEERED PRECISION - Appliance Pros flexible hose connects securely to any standard washing machine, water supply vent, and washer inserts.....
  • BURST PROOF - Made with durable materials, this washer hose is most certainly burst-proof and leak-free. Withstands up to 1500 psi pressure, it's a....
  • CONVENIENT INSTALL - Only takes simple household tools to install this water hose for the washer machine. This allows you to save costs from....
  • APPLIANCE PROS - All Appliance Pros Hose units are leak-tested to ensure consistent quality you can trust. Certified domestically and internationally....
Check Stock

POHIR Pressure Washer Hose 70 ft with 3/8 Quick Connect, High Tensile Wire Braided Kink Resistant Pressure Washer Hose 4200 PSI, with 2pcs M22 14mm Quick Connect 3/8 Multi-Scene Use

  • ♛【70 ft Pressure Washer Hose】- The pressure washer hose 70 ft is high tensile wire braided, it's durable and able to support quite high working pressure. Inner tube is reinforced with synthetic rubber. Reasonable selection of 1/4" inner diameter greatly reduces the weight and volume of the hose body, making it more convenient to use and storage. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use..
  • ♛【Pressure Washer Hose 4200 psi】- MAX working pressure of this high pressure washer hose can reach 4200 PSI. The burst pressure is up to 16000 PSI. Max working temperature is 140℉ / 60℃. Flow rate is 2.5 GPM to 5 GPM. It's designed to be compatible with most brands of power washers..
  • ♛【3/8 Quick Connect Pressure Washer Hose】The hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked. Warm tips: it's a pressure hose, not a garden hose. Suitable for pressuer washer only..
  • ♛【Kink Resistant Pressure Washer Hose】- The combination of high-quality materials and high-tech craftsmanship brings excellent kin....
Check Stock

Supplying Demand 41025 Clothes Dryer 5 Foot Braided Stainless Steel Steam Hose Installation Kit with Elbow

  • Hose measures 5 ft with the 90 degree angle to allow for closer installation to the wall 60-inch X 3/4-inch FHT x 3/4-inch FHT fill hose.
  • This braided stainless steel will ease peace of mind instead of basic rubber hoses.
  • 3 piece set - Includes 5ft Hose, 1 Ft hose, and Y connetor..
  • This steam dryer installation kit comes with all the components needed to install your new steam dryer or update your existing one with newer stronger....
Check Stock

Beaquicy Washer Stainless Steel Hoses with 90 Degree Elbow - 4 Ft Long Red and Blue (2 Pack) Burst Proof - Hot and Cold Striped Water Supply Lines for Washing Machine - 10YEAR WARRANTY

  • ✅【SAFETY AND DURABLE】:Stainless Steel Washer Supply Hose 4 Ft use true 304 stainless steel for braided outer protective cover , can effective protection against rust and leaking. 4 Ft Stainless Steel Washer Hoses has a 3/4-inch female hose thread connection, and the stainless washer hoses are equipped with 90-degree elbows on one end for an easy and smooth installation in tight spaces. Washing machine hot and cold water hoses fit for almost all washers..
  • ✅ 【PRODUCT INCLUDES】:Each package includes two water supply line, 1 x Blue colored stainless hose for cold Water, 1 x Red colored stainless hose for hot water. Washer supply hoses are color-coded to ensure easy matching of hot-to-hot and cold-to-cold from the water supply faucet to the washing machine. 4 FT Washing machine stainless hose with a 90 degree elbow will work from 15° F - 158° F can be used in both high and low temperature environments..
  • ✅【10 YEARS WARRANTY】:The 4 FT Washing Machine Hoses with 3/4" 90-Degree Elbows supports 10 years return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping,if you have any quality probl....
Check Stock