Janlynn Cross Stitch Kit 8.125-Inch by 7-1/2-Inch Guardian Angel
- Guardian Angel cross stitch kit contains 14-count steel grey 100% cotton Aida fabric.
- Instructions in English, French and Spanish.
ReviewsFilament 7dark Grey
SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black
- ①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
- ②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
- ③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
- ④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
- ⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....
Talens Opaque Watercolors Metal Tin Set of 12 Round Pans
- The Art Creation watercolour paint is brilliant, intense and very transparent as all the colours have the highest degree of lightfastness even when....
- Due to the purity of the paint, the colours are easy to mix and wash to create the minutest of difference shades..
- Each pan has easy colour transfer and uniform viscosity of the various colours providing lively colours as a result..
- Perfect for beginners, students, professionals or for painting al fresco and comes in a robust, lightweight case..
- This set contains 1 Filament brush and 15 pans with the colours: Payne's Grey (708), Burnt Umber (409), Yellow Ochre (227), Dark Green (602), Burnt....
Stuff Sack Set of 3 Lightweight Nylon Mesh Drawstring Storage Bag for Travelling Hiking
- Ultralight Ditty Sacks Stuff Sack Set of 3 Lightweight Nylon Mesh Travel Drawhstring Bags for Travel & Outdoor Activity.
- Multi-filament nylon mesh for high strength, color:grey..
- High quality mesh for better visibility and round base design,weight is very light.
- Double stitched and reinforced seams for greater durability.
- Suitable for survival, hiking, camping, fishing, traveling, and gift idea, recreational,diving.
- Material: Nylon Mesh Color: Sky Blue (S), Orange (M), Light green (L) Size S: Approx 12 x 7 inch, Size M: Approx 13 x 8 inch Size L: Approx 16 x 12....
3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO
- 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
- 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
- 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
- 【3D Petg Filament ACCURACY & CONSISTENCY】....
ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Green
- 1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations..
- 2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface..
- 3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens..
- 4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger..
- 5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface..
Inland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools
- PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
- INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
- USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
- EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....
Filament Dryer Box,Upgrade FilaDryer S2 Dry Box,SUNLU Dry Box for 3D Printer Filament,Keep 3D Filament No More Brittle/String/Poor Adhesion,Large-Size Touch Screen,Real-time Humidity Display,Black
- 【Dryer box keep filament dry, 360° even heating】SUNLU S2 filament dryer box, say goodbye to poor 3D printing by damp filament.Dust-free, moisture-free, 360° heating. SUNLU S2 filament dryer has two heat-sinks on top and bottom to provide even heating. Keep the 3D printer filament dry,no more brittle/string/poor adhesion,print smoothly..
- 【Adjustable temperature up to 70℃, Adjustable time】Users can adjust the temperature of the dryer box according to different 3D filament types, ambient temperature, humidity and other factors. Adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
- 【Large LCD touch screen, easy to operate dryer box】S2 dryer box has a 3.42*2.87-inch LCD touch screen, touch reaction time less than 0.1 seconds. Dryer box with sensitive response, provide the tablet-like smooth experience. One-Click operation, provide suggested parameters for different 3D filament. Easy operation, make the filament keep drying during 3D printing..
- 【Real-time humidity display, visualization of filament drying】S2 dryer box has a high-precision humidity detection sensor, displaying real-time humidity ins....
SUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75
- ① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
- ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
- ③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
- ④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
- ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
- ⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..
PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent
- ①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
- ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
- ③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
- ④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
- ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
AMOLEN 3D Printer Filament Glow in The Dark Multicolor PLA Filament, 3D Printing Filament Color Change in 10 Meters, 1KG
- GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
- UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
- HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
- GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
- VACUUM & REUSABLE BAG - Vacuum packaging with desiccant....