ReviewsFilament Hollow

SUNLU 250g PETG Filament 1.75mm Bundle, 3D Printer Filament, Toughness PETG Filaments, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange

  • ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use..
  • ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use..
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers..
  • ④【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
  • ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s..
Check Stock

KingOrigin 8 inch Deck Stain Brush Work with Stain,Paint and Sealers

  • Brush Specs: 5” wide x 1” thick, soft synthetic filament blended with natural bristle. Hold more stain/sealer and paint smoothly, making your home improvement job a breeze..
  • Selected Premium Large Stain Brush: for all paints and stain/ sealant. No loss of bristle. This stain brush can also be used for dusting, waterproofing, masonry and heavy-duty painting projects. A soft Utility Attachable Paint Brush..
  • Wide and Thick Deck Brush: easily apply stain/ sealer in between planks, cracks and back-brushing, simplify your painting tasks, either on rough or on smooth surface, for exterior or indoor, thick or thin coat..
  • Brush with a Threaded Grip: The hollow handle can add a universal screwed broom/mop handle or a painter’s extension pole when staining decks, floors, logs, porch, shed and fence, etc., no painful knees or backache..
  • Easy to Clean in proper way. Resistant to all solvent..
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

Solar Lantern Outdoor Waterproof White Metal Hollow Out Solar Powered Hanging Lantern Decorative Farmhouse Warm Yellow Light for Garden Patio Courtyard Lawn (Edison Bulb)

  • ...where you want, perfect for garden, yard, patio, porch, wall, pathway, driveway, lawn, camping, trees, pergolas, etc. outdoor solar landscape lighting and decoration..
  • 【Modern & Vintage Design】 Dimension: Dia 6'' x 8.75'' H Vintage lantern body, hollow out flower pattern design with in-built warm yellow LED filament bulb increase a warming glow and decorate your gorgeous life with more romantic ambiance and show your exquisite taste to your visitors..
  • 【Portable Hanging & Table Lanterns】 Easy to use! Easily hangs from a hook as a hanging light at anywhere you want, or you can placed it on the flat surfaces, such as lawn, ground, tables as a ground lantern. Waterproof, Easy to installation, no wire needed. It’s the best gift for your friend..
  • 【Energy Saving & Brighter】 Solar powered, automatically charging in the sunlight. Built-in (1) long lasting 1.2V AAA 600MAH Ni-MH rechargeable battery. When fully charged, the battery can run for 6-8 hours. Lumen: 6-8 lumen, automatically turn on at dusk and turn off at dawn..
  • 【All Weather Resistant】 IP44 certified design, waterproof and dust-proof for long-term outdoor environment. Classic and pop matte white coated finish to prevent the lamp from rust. Farmhouse and elegant style looks ve....
Check Stock

SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red

  • ① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
  • ②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • ④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
  • ⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Black

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Purple

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Green

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Blue

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock