ReviewsFilament Spool

Inland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools

  • PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
  • USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....
Check Stock

TPU Filament 1.75mm, SUNLU TPU 3D Printer Filament, Flexible Filament 1.75, Dimensional Accuracy +/- 0.03mm, 0.5kg Spool, 1.75 TPU Grey

  • ①【TPU 3D Printing Filament】TPU filament is made of flexible thermoplastic polyurethane, like rubber. Very suitable for printing keyrings, insoles, mobile phone cases, etc.!.
  • ②【Excellent Printed Results】SUNLU TPU filament has excellent layer adhesion, very easy to print. TPU filament is wear-resistant, oil-resistant, good elasticity, anti-aging, color, no bobble..
  • ③【TPU Recommend Settings】We recommend printing at a Nozzle temperature of 205°C - 230°C (401°F - 446°F) and Bed temperature of 0°C - 60°C (0°F - 140°F), printing speed is 0 - 40mm/s..
  • ④【TPU 1.75mm Diameter】Dimensional Accuracy +/- 0.03mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ⑤【SUNLU Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
Check Stock

Gizmo Dorks ABS Filament for 3D Printers 1.75mm 200g 4 Color Pack - Blue Green Orange Red

  • ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant.
  • Extrusion nozzle temperature: 225 - 250 C.
  • Recommended to use a heated build platform.
  • Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
  • ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
  • Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Orange, Red.
Check Stock

Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, 4 Color Pack - Blue, Green, Orange, Red

  • PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
  • Recommended Nozzle Temperature: 190 - 225 C.
  • Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
  • PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
  • Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Orange, Red.
Check Stock

Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Black

  • Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
  • Extrusion nozzle temperature: 255 - 300 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check Stock

Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Blue

  • Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
  • Extrusion nozzle temperature: 255 - 300 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Black

  • 1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Natural ABS 3D Printer Filament 1kg Spool (2.2lbs), Natural

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C - 260C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Gray ABS 3D Printer Filament 1kg Spool (2.2lbs), Gray

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C - 260C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Gray ABS+ 3D Printer Filament 1kg Spool (2.2lbs), Gray

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C - 260C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Black ABS+ 3D Printer Filament 1kg Spool (2.2lbs), Black

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C – 260C.
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″.
Check Stock