ReviewsFilling Machine For Viscosity

Octopus Glue - Liquid Optically Clear Adhesive (LOCA) - The Original Premium LOCA UV Glue (3 ml Single)

  • SUPER LOW VISCOSITY: 1400 (MPA.S). Super low viscosity means that Octopus Glue is not very thick and flows very easily. Not only are air bubbles less likely to occur with Octopus Glue, but they are also easier to remove. Octopus Glue's super low viscosity also means that you can get the job done with less glue than with generic LOCA formulas. Using a thinner layer of glue also results in increased optical performance of the repaired device. Ask about other generic LOCA's viscosity values, they will be most likely over 2,000 to 5,000..
  • HIGH LIGHT TRANSMITTANCE: 99% @175 um. Octopus Glue improves the viewing experience by increasing contrast ratio and minimizing quality loss due to reflection. Its unique formula results in a clear, haze-free and yellowing-free finish like a brand-new phone. EXCELLENT GAP FILLING: Octopus Glue fills small scratches on the digitizer surface that may occur when removing old adhesive..
  • HARDNESS: 25A. Octopus Glue's 25A hardness increases the display's overall strength and extends the screen assembly's life by making the display more resistant to heat, moisture, and temperature changes..
  • 3ml GRADUATED SYRINGE: Octopus Glue takes the guess-work out of a repair by coming in a UV resistant amber graduated syringe that measures in....
Check Stock

Xfactor Professional Grade UV LOCA Glue Clear Adhesive (50ml Xfactor Low Viscosity UV LOCA)

  • ...R: Xfactor UV GLUE Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer in a smart phone or tablet display assembly. Compatible with all touchscreen devices and other phones and tablets needing LOCA to attach glass and/or digitizer to LCD.
  • PROFESSIONAL GRADE, LOW VISCOSITY adhesive dries clear! - 2000mPa*s viscosity (general LOCAs average 5000mPa*s). Thanks to such LOW VISCOSITY, bubbles/voids can be easily removed, smaller amounts of glue can be used, easier to clean, flows well, & cures with NO YELLOWING EFFECT, GUARANTEED!.
  • EXCELLENT GAP FILLING & HIGH LIGHT TRANSMITTANCE: Xfactor UV GLUE LOCA fills fine scratches that may occur upon removing the old adhesive. Xfactor UV GLUE eliminates mirror effect, rainbow effect, poor contrast, and low brightness, while improving touch sensitivity for that OEM look and feel you so desire!.
  • BLACK LIGHTPROOF TUBE ensures adhesive will remain in a liquid state, rather than harden like transparent tubes. Note: LOCA is sensitive to UV. Exposure to sunlight will cure adhesive, which is why all our tubes are black.
Check Stock

Multifunctional A03 Manual Paste Liquid Filling Machine, Wine Bottle Filler 5-50ml, Stainless Steel lip gloss base Filling Machine for liquid cosmetic,Cream, Shampoo, Cosmetic, Honey

  • ①【Filling Capacity】5-50ml (liquid,paste or other liquid substance). Our A03 filling machine named lip gloss dispenser machine, cream filling machine, lotion filling machine, oil dispenser machine, wine bottle filler. Our A03 filling machine does not require electricity and gas, which is suitable for laboratory and small batch production..
  • ②【Corrosion resistant】The machine is suitable for acidic liquids, good wear resistance and high temperature resistance, and can be filled with paste liquids up to 200°C..
  • ③【Update filling machine】High-quality steel cylinder, water separator, stainless steel filling nozzle and anti-drip design can ensure accurate filling and product purity..
  • ④【Easy to clean】This machine is made of high-quality stainless steel, which runs stably and has a long service life. And the hopper is easier to disassemble and clean..
  • ⑤【Application】The manual filling machine is mainly used for the filling of liquid paste in the pharmaceutical, daily chemical, food processing and other industries. It can also be used for quantitative filling of sealed hoses. It is an ideal paste liquid filling equipment..
Check Stock

KUNHEWUHUA Digital Viscometer 15~100,000 mPa.s Rotary Viscosity Meter Tester NDJ-5S Newton Liquid Fluidimeter Tester 100-240v

  • ❤ 【APPLICATION】Digital rotary viscometers are widely used in the measurement of viscosity of non-Newtonian fluids such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
  • ❤ 【FEATURES】The screen can directly display the viscosity, rotation speed, rotor number, percentage torque and other information. The full scale of the viscometer is automatically corrected according to the standard silicone oil standard value. The measurement result is accurate and reliable, and the repeatability is good..
  • ❤ 【ROTORS】Equipped with a No. 1-4 viscometer rotors. Different rotors can be selected according to the viscosity range of different test liquids, and different speeds can be set..
  • ❤ 【NDJ-8S】The NDJ-8S has a larger viscosity measurement range. The NDJ-5S can be selected for liquids with a small viscosity change range. The NDJ-9S is equipped with a temperature sensor for experimental projects where liquid temperature needs to be monitored at any time. The additional No. 0 rotor is suitable for liquids with a viscosity range of 0-15 mPa.s..
  • ❤ We are the original factory of the viscometer machine, we are confident with our products. If you have any qu....
Check Stock

10 Pcs Thermal Binding Folder Thermal Binding Covers for Classrooms File Cover and Tax Folders Holds 25 Sheets (Blue)

  • Why Use Thermal Binding Folders? Use thermal binding folder to create a low-cost and very professional look for your documents. This thermal binding way provides flexibility to add or delete bound pages..
  • Quantity And Size: 10 pcs thermal binding cover ,each thermal binding cover size 11.7*8 inches, suitable for A4 file size, can hold 25 reports or job forms..
  • How To Use: Put the document you want to bind into the thermal binding folder, put it into the hot-melting machine for hot-melting, and then make the document and glue stick firmly, and finally the document of the cost appears..
  • High Quality: This thermal binding cover has low melting point and high viscosity, and adopts advanced glue filling process to make the paper bond stronger..
  • Multipurpose: Thermal binding folders are versatile and can be used to bind contract tenders, for school, office, home paper binding..
Check Stock

FastCap 2P-10 MED 10 oz/283g Two Part Instant Wood Adhesive Medium Adhesive 10 oz Activator Sold separetly One Bottle

  • ACTIVATOR SOLD SEPARATELY. Can be Mixed with FastCap 2P-10 Colorant. 2-year shelf life guaranteed. Viscosity in Centipoise: 100-120.
  • Dries clear. Bonds in 10 seconds and cures in 30. Excellent gap filling capacity. Great for binding joints. Ideal for filling holes.
  • Easy to sand within 60 seconds. Designed for wicking 1/8 of an inch size cracks.
  • Medium adhesive for use on smooth surfaces such as melamine and laminate.
  • Triple distilled for purity. 4000 PSI tensile shear. Non-clogging pin-cap.
Check Stock

Xfactor Hydro XFUV10BLK 10ml LOCA UV Glue - Premium Grade LOCA (Liquid Optical Clear Adhesive) - Low Viscosity !!

  • ...AIR: STICKY-iCKY 1000 Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer in a smart phone or tablet display assembly. Compatible with ALL touchscreen devices, phones and tablets needing LOCA to attach glass and/or digitizer to LCD.
  • PROFESSIONAL GRADE, ULTRA LOW VISCOSITY adhesive dries clear! - 2000mPa*s viscosity (general LOCAs average 5000mPa*s). Thanks to such LOW VISCOSITY, bubbles/voids can be easily removed, smaller amounts of glue can be used, easier to clean, flows well, & cures with NO YELLOWING EFFECT, GUARANTEED!.
  • EXCELLENT GAP FILLING & HIGH LIGHT TRANSMITTANCE: Xfactor UV GLUE LOCA fills fine scratches that may occur upon removing the old adhesive. Xfactor UV GLUE eliminates mirror effect, rainbow effect, poor contrast, and low brightness, while improving touch sensitivity for that OEM look and feel you so desire!.
  • BLACK LIGHTPROOF TUBE ensures adhesive will remain in a liquid state, rather than harden like transparent tubes. Note: LOCA is sensitive to UV. Exposure to sunlight will cure adhesive, which is why all our tubes are black.
Check Stock

BestEquip A03 Liquid Filling Machine 5-50ml Bottle Filler Manual Liquid Filling Machine for Cream Paste

  • Efficient Manual Filling: The liquid and paste filling machine are operated by manual power, providing an efficient and accurate filling with high speed. Filling speed: 20-30 times/min. Filling volume: 0.17-1.7 oz/5-50ml(adjustable). The capacity of the hopper: 22 lbs/10 kg. They are filling accuracy is +/- 1%..
  • Stainless Steel Structure: Our manual liquid filling comes with a food-grade 304 stainless steel hopper, which is easy to disassemble and clean. Besides, the thickened piston ensures the fill more smoothly without plugging. The solid base keeps the machine sturdy, making the machine work steadily..
  • Reasonable Design: Designed with a high-quality anti-drip filling nozzle made of premium steel that is able to endure wear and high temperature, this lip gloss filler machine features precise filling. Filling volume and speed can be controlled manually through two screws. Please loosen the screws A1 and A2 to adjust the output..
  • Easy to Operate: Add the filling material to the hopper, adjust the filling volume, then use the handle switch to control and finish the filling. We recommend you clean the machine before using it. Just put aside the screw and upload the hopper. It is convenient to operate and clean this liquid filler with no fatigue..
Check Stock

BestEquip A03, Manual Liquid Filling Machine Stainless Steel, Bottle Filler 5-50ml for Paste Cream Cosmetic, 281212, white

  • Efficient Manual Filling: The liquid and paste filling machine are operated by manual power, providing an efficient and accurate filling with high speed. Filling speed: 20-30 times/min. Filling volume: 0.17-1.7 oz/5-50ml(adjustable). The capacity of the hopper: 22 lbs/10 kg. They are filling accuracy is +/- 1%..
  • Stainless Steel Structure: Our manual liquid filling comes with a food-grade 304 stainless steel hopper, which is easy to disassemble and clean. Besides, the thickened piston ensures the fill more smoothly without plugging. The solid base keeps the machine sturdy, making the machine work steadily..
  • Reasonable Design: Designed with a high-quality anti-drip filling nozzle made of premium steel that is able to endure wear and high temperature, this lip gloss filler machine features precise filling. Filling volume and speed can be controlled manually through two screws. Please loosen the screws A1 and A2 to adjust the output..
  • Easy to Operate: Add the filling material to the hopper, adjust the filling volume, then use the handle switch to control and finish the filling. We recommend you clean the machine before using it. Just put aside the screw and upload the hopper. It is convenient to operate and clean this liquid filler with no fatigue..
Check Stock

Pacer Tech SGM22-12 Original Super Glue Future Glue Gel Instantly Bonds Metal, Rubber, Most Plastics, Aluminum, Ceramics, China, Wood, Leather, Pottery

  • Price For: Each Application Time: 10 to 30 sec. Functional Cure: Not Specified Chemical Type: Cyanoacrylate Item: Instant Adhesive Color: Clear Full Cure: 24 hr. Temp. Range: -65 Degrees to 180 Degrees F Viscosity: Gel Application: Aluminum, Brick, Cardboard, Ceramic, Corkboard, Fabric, Wood, Leather, Metal, Most Plastics, Rubber, and Vinyl.
  • Characteristics: For Vertical Applications And Gap Filling, Temp And Chemical Resistant, For Porous And Non-Porous Materials, Medium Viscosity, For Preassembled And Close-Fitting Parts Adheres To: Aluminum, Brick, Cardboard, Ceramic, Corkboard, Fabric, Wood, Leather, Metal, Most Plastics, Rubber, And Vinyl Size: 2g Specific Gravity: 1.05 Container Type: Tube Gap Fill: 0.020" Standards: NA Tensile Strength: 2800 psi.
  • Country of Origin (subject to change): Taiwan.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock