ReviewsFilling Valve

CLICIC 2 Gallon Pressure Sprayer with 7 Spray Modes, Camping Shower with Removable Hose and Shower Head for Camping Outdoor Traveling Hiking and Pet Bath, 8L

After camping, hiking, or playing on the beach, you can take a shower easily.
EASY FILLING: Funnel top opening allows for easy no-mess filling. Simply unscrew, fill up the bottle, and close the lid. Pump up the pressure and you are ready to go!.
Equipped: With pressure relief protection valve, can be in the case of too much air will automatically vent pressure relief, can avoid the risk of pot burst due to the pressure is too large. At the same time, the exhaust valve can also be after the work, pull up the exhaust valve to release the excess pressure in the bucket, can effectively the longer the service life..
WATER GUN DESIGN: The nozzle can be rotated 360 degrees, there are 7 kinds of watering mode, you can choose these watering modes. The pump handle is ergonomic..
MULTI-PURPOSE: It can be used for showering, washing fruits, watering flowers, etc. Sprayers for indoor and outdoor use are limited to your imagination.

Check Stock

The Enchanted Files: Cursed

【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..

Check Stock

Promare [Blu-ray]

【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..

Check Stock

Clscea 1.3 L CO2 Cylinder Generator Kit with Solenoid Valve for Aquarium Plants (Mini)

【mini Body】Designed for small tank. Does not take up too much space! Quick plug design, makes the filling of ingredients SO convenient!.
【High Quality Accessories】Acrylic co2 diffuser(the disk can be replaced and the refining effect is much better than glass one).
Check valve(prevent thetank water backflow).
【SUS 304 Filter Element】Minimize the failure of solenoid valve.
【SUS 304 Stainlees Steel Material 】The Cylinder, Filter Element and the Neddle valve., etc are all using real SUS 304, Durable and long lasting.
【Low Temperature Silent Solenoid Valve】12V DC, working temperature is lower than body temperature, no sound and no noise!.

Check Stock

Small 150 Psi Air Compressor Line

【Packing Accessories】Gasket,Intake Valve,O-Rings,Respirator,Cushion,8mm High Pressure Hose,Water Pipe,Water-Pump,Operational Video.
【Cooling system】Charging rate: 60-85L/min.
2.0-3.0cfm, Filling Time: About 10 minutes to full filling of 1 liter tank, Working pressure: Max 30MPa/300bar/4500psi, Electric power: 1.8kw / 2.5hp, Voltage: 110v /60hz / 16a, Cooling Type: Water coller with fan.
【Advantage】Coolant ON/OFF button: to make cool water cycle and cool down temperature, when water temperature indicate high, you can make compressor temporary stop but keep cool system working, then restart compressor until temperature drop down..
【PCP Air Compressor】Directly to personal PCP air gun、paintball or paintball co2 tanks for filling, not for greater volume scuba diving tanks. Paintball bottle, Max Filling Volume: Less than 1L. (cannot be used directly for breathing).
【Standard Warranty】One year warranty.HPDAVV guarantees the best quality of our products..

Check Stock

DIN Valve Scuba Adapter, Paintball Scuba Fill Station, HPA Tank Filling Adapter Charging System with 4500 psi PCP Paintball Filling Air Hose,Compatible with Standard K-Valve, J-Valve and H-Valve.

❦ USE IT SAFELY---The paintball Fill Station adapter is compatible with standard K valve, J valve and H valve. You can safely fill the compressed air in the diving tank with PCP air guns into paintball, HPA co2 tanks..
❦ EASY OPERATION---The DIN Valve Scuba Adapter is convenient and reliable design allow us to connect each fill adapter to the male air tool fittings simply, then your tank will be filled up quickly. Very suitable for outdoor use..
❦ PERFECT CONFIGURATION--The Yoke Fill Station is equipped with a 36-inch stainless steel braided fuel filler pipe for longer service life and 8mm standard female quick-disconnect coupling plug..
❦ STRONG PRESSURE RESISTANCE---HPA Tank Filling Adapter's working pressure up to 4500 psi, Max up to 6000 psi. You can use it for PCP rifle, fire-fighting, snorkeling dive system, scuba shop, and Paintball tanks filling, etc. The latest double O-ring design can extend the service life..
❦ QUALITY SERVICE---we wholeheartedly provide you with a one-year warranty period. During the maintenance period, if you have any questions or are not satisfied, you can contact me at any time. We will provide you with a 100% refund service. Happy shopping!!!.

Check Stock

Butane Refillable Torch Lighter - All Metal Adjustable Blue Jet Flame Windproof Portable Unique Design Lighter with Press Button for Candle Grill Kitchen Cooking Camping (Gas Excluded) (Black)

MULTIPURPOSE USE - This jet torch lighter is also suitable for occasions like hiking, camping trip, BBQ on the beach, parks, etc. Come in an elegant box, it is a perfect gift for birthday, friends, boyfriend, Father’s Day, Anniversary, Thanksgiving, Christmas..
WINDPROOF & FLAME ADJUSTABLE - The jet design can easily against wind, you can use it outdoor. Also you can adjust the flame strong or weak..
HIGH END &REFILLIABLE - This Cigar lighter is made by zinc alloy. Powerful blue jet flame lighter with copper outlet valve. Universal refill valve for easy butane refill..
REFILLABLE STEPS - Please press the bottom inflation port to release the air/remaining gas before you filling. We will also send you the detail filling steps via email. ⚠️Note: Excessive filling will cause butane leakage..
SHOP WITH CONFIDENCE - We provide 30 days' money back and a 1-Year Warranty against manufacturing defects. Our products have been improved in quality aftermarket research, and we are confident that our products can meet our customer needs. Any questions can contact us through Amazon..

Check Stock

Alomejor CGA347 Paintball Fill Station Kit PCP SCBA Fill Station Charging Adapter with Hand Tight Paintball Refill Adapter

SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time..
45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank..
APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..

Check Stock

Microlit Bottletop Dispenser Premium Series (30ml)

Certificates - ISO 9001, ISO 13485, ISO 17025, CE.
Fully autoclavable at 121° C, 15psi. for 10 - 15 mins.
Allows Dispensing/Filling sample bottles accurately up to 30ml.
Highest chemical compatibility due to springless valve and PTFE piston.
Recirculation Valve for removing bubbles before dispensing.

Check Stock

10 CF Acetylene MC and 20 CF Oxygen Cylinder Set

10 cu ft Steel Acetylene Cylinder Size MC CGA520 Valve Installed.
20 cu ft Steel Oxygen Cylinder CGA200 Valve Installed.
Professional Safety and Performance Features.
All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..

Check Stock

Sandia 40-1000 Solution Tank with Super-Drain Valve, 4 gal, Standard White

Quick change Valve seal, No tools needed.

Check Stock