ReviewsFinishing End Mill

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

... Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
Attain excellent production rates thanks to the strong tooth with double relief angles..
Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..

⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..

(1) Processing range: finishing, roughing, plane processing, step surface processing for steel..
(2) Using high-quality 42CrMo steel, HRC48. Hardened treatment, sturdy and durable, low resistance..
(3) Large chip space, smooth chip evacuation, stable and good performance even in bad processing conditions.
(4) Off-position fastening design of screws make the inserts and milling cutter more fit.Suitable for powerful cutting, large rotation and large feed..
(5) Package includes: 1× 300R C15-16-150-2T (15mm*150mm) End mill cutter + T8 wrench ( INSERTS NOT INCLUDED).

4 in 1 Wood Rasp: Flat Mill, Half-round Second-cut, Flat Wood Rasp, Half-round Wood Rasp..
Flat Mill File fits for Smoothing Edges and Sharpens Blades..
Flat Wood Rasp fits for Finishing the Wood, Leather, Soft Metals & Plastic Roughly..
Half-round Second-cut File fits for Smoothing the Inside Surfaces of Contoured Openings and Holes..
Half-round Wood Rasp fits for Shapes Interior Contours Roughly..

SIZE: Ball Radius: 0.5mm (Cutting Diameter: 1.0mm), 1/8” shank, Flute Length: 15mm, Overall Length: 1-1/2".
TIALCN coating is a nano coating, which means it’s extremely hard, and can be used at high temperatures and still yield low friction. Package include: 5 pcs Tapered Ball Nose Carving End Mill.
Package include: 5 pcs Tapered Ball Nose Carving End Mill.
Fit for CNC, Engraving machine. Ideal for Plywood, hardwood, acrylic, 3D carving.

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.