ReviewsFireplace Fan

ZHENGXOO Wood Stove Fan Heat Powered, 4-blade Fireplace Fan with 46° Oscillation Mode, Energy Saving and Power Saving, for Wood/Gas/Pellet Stove

...ir around the fireplace wider and faster in the same amount of time. It also has powerful horsepower with wind speeds up to 180 CFM. no more fear of harsh winter days..
【Eco-friendly】- Reduce wood consumption and live more environmentally friendly. The heat-driven fireplace fan pushes the hot air flowing upward around the stove horizontally into the air. As a result, it speeds up the circulation of hot air through the room, reducing the fuel consumption of the stove by 25%..
【No electricity required】- Save your electricity consumption. This eco-friendly furnace fan does not require batteries or external power. It uses the heat from the surface of the stove to rotate and will automatically rotate when it reaches a certain temperature. Still need to worry about the high electricity bill?.
【Quiet operation】The only moving part in the fireplace fan is the blade assembly, which operates at less than 25db, so you don't even know where the heat-driven woodstove fan is, but you still feel warm. You can enjoy the warm air in a quiet and comfortable environment..

Check Stock

Hongso Replacement Fireplace Fan Blower & Heating Element for Heat Surge Electric Fireplace

Hongso Electric Fireplace Blower / Squirrel Fan & Heating Element.
➤Fits Heat Surge brand electric fireplace.
Total Width (Does not include Heating Element) = 10″, Depth = 3 1/2″, Height = 3″ Blower fan Size: Diameter 48mm x L:190mm.
Standard Setting Heats a 12′ x 13′ room. Motor UL Approved, Durable, Quiet and Efficient, Easy to install.
Note: Please measure the space for installing this blower in your Stove or Fireplace, and compared with the dimension of this blower. If you have any questions or concerns, please email us before ordering.

Check Stock

Yiming Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Circuit On At 120°F and Off At 90°F.

★ Universal Fit - The magnetic thermostat on/off switch with high temperature resistant wire, used in universal wood stoves, fireplace blower kits, gas log firplaces. Such as Heat N Glo, Heatilator, Majestic, Desa Tech, Regency fireplace..
★ Very Easy to Install - The fireplace thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox..
★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops..
★ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance)..
★ What You Get: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower fan kit. The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket to ensure extra protection and durability..

Check Stock

Criditpid Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan kit /Fireplace Stove Fan Magnetic Temperature Switch ON at 120F Off at 90F Approx

【Designed for Fireplace Stove Blower Fan】: Magnetic Thermostat Switch with High Temperature Resistant Wire, ideal to use for Fireplace Blower Fan,....
【Automatic Magnetic Temp Switch】: "ON" at 120℉, "OFF" at 90℉. This temperature switch activate (turn on) at approximately 120°F and shut off....
【Compact Size】: The Magnetic Temp Sensor measures 2 1/2-inches in length by 1-3/4-inches in width. 【Extra Strong Magnet】: Magnetic base with....
【Premium High Temperature Resistant Wire】: The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket....
【What You Get】: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower and fan kit applications, Welcome Guide and friendly....

Check Stock

DALSUC Electric Space Heater for Indoor Use - 1500W/1000W Quiet PTC Ceramic Portable Heater for Office, Small Electric Fireplace Heater Fan with Overheat Tip Over Protection,Fast Safety Heating Black

...echnology, safe and energy efficient, save your money and friendly to the environment. Our small space heaters for indoor use will keep your room warmer and save your energy bills in the coming winter. The small space heater will bring you a warmer winter..
【 A Memory of Fireplace 】 Dalsuc fireplace space heater designed with realistic 3D flame effect. Our electric fireplace space heater can create an enchanting fireside environment without the mess and smoke of the actual fire. The fireplace heater bring you back to the happy fireplace time, reminiscent of the the warmth of the past that the family sitting around the fireplace when you were a child. It's a portable mini fireplace heater which can use on your desk. Realistic flames of indoor space heater is a beautiful decoration in your home..
【 Double Safe and Worry-Free】 Designed with a sensitive electronic tip-over switch, our small portable heater will stop work immediately when tipped over. The room heater carries a sensor and automatically shuts off when the temperature of the internal heater reaches 165°F in accident. Tip-over and overheating protection, no matter how long the small indoor spac....

Check Stock

Wood Stove Fan Heat Powered Fireplace Fan, Thermoelectric Fan Eco Fans for Wood Burning/Pellet/Log Burner, Enhanced Dual Motor (Include Accessories Magnetic Stove Thermometer)

【12 Blades WoodStove Fan】The Cocoon fan for wood stove is equipped with 12 Blades, Double Fans and dual motors, has faster Speed and Larger Air Volume. The fireplace fan is designed to circulate the warm air created by a logwood/coal/pellet burning. Efficiently circulates warm air throughout the room.
【Heated Powered Stove Fan Non electric】Our Eco fan for wood stove is an Environment-friendly Thermal fan. The thermoelectric module acts as a small generator to power the fan's motor. Improved warm air circulation results in greater warm and reduces wood consumption..
【Quiet Operation】 This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves.
【Safety and Long Life】Stove operating with normal surface temperatures between 212°F(100°C) and 662°F(350°C). Built-in overheating protection, when the temperature exceeds 662°F(350°C), the metal strip at the bottom will expand and lift the fan to protect the motor.
【Quality Warranty & Free Thermometer】The Package comes with a stove top fan and a free Fireplace accessory -thermometer. please put the fan on the side of the chimney, (leave a space of 15cm behind the fan) so that the fan can....

Check Stock

Heat Powered Stove Fan, 4 Blade Bidirectional Heat Conduction Fireplace Fan for Home Gas, Pellet, Log, Wood Buring Stoves - Silent Eco-Friendly

【Upgraded Fireplace Fan】- The new fireplace fan has two thermal conductive sheets, which can quickly transfer heat to the motor, which can generate more warm air and improve the efficiency of the product..
【No Operating Cost】- The Fan uses the heat on the surface of the furnace to rotate. When the temperature reaches 50 ℃ (122 ℉), the fan rotates automatically. It can automatically adjust the speed according to the temperature, up to 350cbm / h..
【Low Noise】- Newly designed blades, greater air volume and lower noise. The movable part is the blade assembly, and the working noise is below 32dB. You can enjoy the warm air in a quiet and comfortable environment..
【Safety Design】- Our fan has an overheat protection device，The fan comes with a bimetallic safety device in the base of the fan.When the surface temperature rises above around 250℃, it will gently lift the front of the fan to protect the TEG and motor..
【Lifetime Technical Support】- The frequently asked questions can be found on the USER GUIDE, if still any questions or complaints during uses, just contact us directly for solutions..

Check Stock

X-cosrack 5 Blades Heat Powered Stove Fan for Wood Log Burner Fireplace Slient Eco-Frienly Fan with Magnetic Thermometer Aluminium Black

Heat Powered: X-cosrack wood stove fan is powered by the heat from your fireplace or wood log burning stove, no electricity needed.
more efficiently distribute heat and save fuel, eco-friendly.
5-Blade, Larger Air Volume: Upgraded 5 blades circulates more warm air (Max 380CFM)into your whole home, perfect for all-size room. Just put on the top of stove, the fireplace fan will work when the stove surface hotter.
Operating Temperature: The stove fan spins automatically between 50°C(122°F)-340°C（644°F). The hotter the stove is, the faster the fan spins, the more warm air your home gets. A magnetic thermometer included to monitor the temperature of your stove.
Overheating Protection: The metal sheet at the bottom of fan will protect the stove fan when the temperature is higher than 644°F. Anodized aluminum material makes the fan rustproof and corrosion-proof.
you won't even know the fan is there, but you will feel warm. 24hr friendly-customer service and 100% unconditional refund or return if any quality problem..

Check Stock

6 Blade Wood Stove Fan Heat Powered, Non Electric Fireplace Fan with Stove Top Thermal Fan Thermometer for Wood Burning Stove / Fireplace

...rands’ thermal fans can’t last for a few months because of the low quality motor. Fortunately, we can provide a 2-YEAR WARRANTY for our customers. Any problems will be resolved within 24 hours for this stove top fan..
OVERHEATING PROTECTION FOR SAFE - Our heat activated fan has an overheat protection device. The fireplace fan comes with a bimetallic safety device in the base of the thermo electric fan. When the surface temperature rises above around 250℃, it will gently lift the front of the thermal electric fan to protect the TEG and motor. The wood burning stove fan will automatically recover normally as the surface temperature decreases..
SUPER SILENT OPERATION – This new 6-blade heat powered fan comes with larger air volume but lower noise, even you will not feel its presence when the heat magic fan is working. The fireplace fan will not disturb your work, reading and other activities. But it will make your home warmer, and you can enjoy the warm air in a quiet and comfortable environment..

Check Stock

ROSOS Electric Fireplace 50\

Electric Fireplace with Realistic Flame Effect: 3 main flame colors & 10 carbon bed colors & 10 backlights are available. 6 light intensities for selection. Total 300 lighting combinations go with crystal stone and log meet all needs..
Overheat Protection & Timer: The electric fireplace inserts is fitted with an overheat protection system to avoid dangerous conditions. If the temperature is too high or there is a covering, the fireplace insert will automatically cut off the power supply. The fan of electric fireplace insert will continue to work 60 seconds without heat. The timer can be set for 1-8 hours, convenient for daily use..
Thermostatic Design: The temperature of the electric fireplace can be adjusted from 41F to 99F. When desired ambient temperature is reached, the electric fireplace wall mounted will automatically stop heating. When the ambient temperature drops below the desired temperature 2°C, the wall fireplace will resume heating, extremly energy-saving. 1500w heater quickly provides supplemental zone heating for up to 400 square feet..
3 Ways of Placement: The electric fireplace is designed for recessed, wall mounted and free standing (with 2 brackets). Easy Assembly, just choose the place way you like and install the electric fire....

Check Stock

ROSOS Electric Fireplace 40\

Electric Fireplace with Realistic Flame Effect: 3 main flame colors & 10 carbon bed colors & 10 backlights are available. 6 light intensities for selection. Total 300 lighting combinations go with crystal stone and log meet all needs..
Overheat Protection & Timer: The electric fireplace inserts is fitted with an overheat protection system to avoid dangerous conditions. If the temperature is too high or there is a covering, the fireplace insert will automatically cut off the power supply. The fan of electric fireplace insert will continue to work 60 seconds without heat. The timer can be set for 1-8 hours, convenient for daily use..
Thermostatic Design: The temperature of the electric fireplace can be adjusted from 41F to 99F. When desired ambient temperature is reached, the electric fireplace wall mounted will automatically stop heating. When the ambient temperature drops below the desired temperature 2°C, the wall fireplace will resume heating, extremly energy-saving. 1500w heater quickly provides supplemental zone heating for up to 350 square feet..
3 Ways of Placement: The electric fireplace is designed for recessed, wall mounted and free standing (with 2 brackets). Easy Assembly, just choose the place way you like and install the electric fire....

Check Stock