ReviewsFirmware Backup

Master Lock Padlock, Outdoor Personal Use Bluetooth Lock, 2-7/32 in. Wide, 4401DLH

  • all-weather lock is best used for residential gates, sheds, garages, outdoor storage lockers and tool chests.
  • Use your smartphone to unlock Bluetooth padlock, or enter directional code on lock keypad for easy backup entry when your smartphone isn't present (Wi-Fi connection is not required to operate).
  • Share temporary or permanent access via Bluetooth or keypad code with invited guests , monitor activity, and receive tamper and low-battery alerts all from your free Master Lock vault elocks app for Android and iOS. Designed for personal use, supporting up to 10 locks.
  • Padlock includes a 2-piece weather cover, metal body construction, boron Carbide shackle, and anti-shim locking mechanism for improved strength, security, and weather resistance.
  • Plus military-grade Bluetooth authentication and encryption.
  • 11/32 in. diameter shackle with 2 in. length, 15/16 in. width.
  • extended length shackle for application flexibility.
  • For answers to frequently asked questions, 2018 firmware updates, troubleshooting, and technical support, see document titled User Guide in the technical specifications section of this page.
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

Compustar CS7900-AS 2-Way Car Remote Start & Alarm Bundled with +(1) ADS-Blade AL Universal Integration Cartridge + (1) ADS-USB Weblink USB Interface (Installation NOT Included)

  • CS7900-AS:2-Way Paging Remote Start/Keyless Entry 2-Way Keyless Entry/Remote Start/Vehicle Security Car Alarm System with 2-Way LCD Remote and Backup 1-Way Transmitter Installation NOT Included.
  • 4-button sidekick remote control transmitter 3000 feet range.
  • 105 dB Alarm Siren Included Supports up to 2 vehicles.
  • iDatalink ADS-BLADE AL:Universal 'all-in-one' integration cartridge.
  •  Universal 'all-in-one' integration cartridge. Web-programmable data immobilizer bypass and doorlock integration for over 4000 vehicle models from 1997 to date including exclusive KLON firmware applications. Inserts directly in Blade-compatible remote start, vehicle security and convenience products for seamless integration..
Check Stock

APC 1500VA Smart UPS with SmartConnect, SMT1500RM2UC Rack Mount UPS Battery Backup, Sinewave, AVR, 120V, Line Interactive Uninterruptible Power Supply(Not sold in Vermont)

  • 1500VA / 1000W Pure Sine Wave UPS battery backup.
  • Automatic Voltage Regulation (AVR) adjusts high and low voltages to a safe level, helping preserve the life of the battery..
  • Input: NEMA 5-15P. Output: (6) NEMA 5-15R.
  • FREE Additional 1 Year of Battery Warranty when you connect and register this APC UPS with the SmartConnect App.
  • APC SmartConnect is the first cloud-enabled UPS for Distributed IT. Through a secure portal (via any internet-connected device), you can view the status of your UPS, receive notifications, get firmware updates and more..
  • 2U Rackmount UPS. Includes rack mount support rails.
Check Stock

Brook Wingman SD Converter - Support Xbox Series X/S/One/360 PS5/PS4/PS3 Xbox Elite 1/2 Switch Pro Controllers on Dreamcast Saturn Console PC X-Input Controller Adapter Turbo and Remap

  • Support PS5/ XBOX Series X/S/ Xbox 360 / Xbox One / Xbox Elite 1/ Xbox Elite Series 2/ PS3 /PS4/ SEGA Astro City mini controllers and arcade stick use....
  • 240 blocks of Dreamcast memory capacity. You can backup all of your VMU though software on PC.
  • Support Vibration, Turbo Function and Remap Settings. Keyboard function supported on Dreamcast.
  • Support both wired and wireless controllers.
  • Lightweight and small-sized. Wingman SD do not support headset/microphone function. Please visit Brook website to check whether there is firmware....
Check Stock

Hasbro Family Game Night 4: The Game Show Edition (PS3)

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock

Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5

  • 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (.
  • 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website..
  • 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled..
  • 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process..
  • 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours..
Check Stock

Brook PC PS3 PS4 Fight Board Fighting DIY Kit Turbo Rapid Fire Function

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock

Sniper Elite III - PlayStation 3 Standard Edition

  • Fast, accurate and stable. Designed by pro FPS gamers.
  • Exquisite UI design. Super easy to use. Online storage..
  • No original controller need for revification.Please check the compatibility of the product at the brook official web site before you place the order because NOT all the brand or models of the controllers / wheel / Joystick are compatible with the brook adapter..
  • Hot swapping. Firmware upgradable. NOTE: The latest PS4 firmware update disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using. With Gam3Gear Keychain..
  • BrookSniper App: available in App Store/Google Play. Exquisite UI design. Super easy to use. Real-time applying with blue-tooth devices. Optimized config for popular games. Online storage..
Check Stock

StarTech.com 1 1 Standalone Hard Drive Duplicator with Disk Image Manager for Backup and Restore Store Several Disk Images On One 2.5/3.5 SATA Drive HDD/SSD Cloner No PC Required SATDUP11IMG

  • DISK IMAGE LIBRARY MANAGER: This standalone 1:1 SATA duplicator can create a disk images library by managing several host disk images on a single....
  • DRIVE DUPLICATION MODES: 4 Duplication Modes: System and File, All Partitions, Percentage Copy and Sector-by-Sector (Whole Drive) | 6 GB/min Copy....
  • DRIVE COMPATIBILITY: Supports 2.5/3.5" SATA HDDs/SSDs of any capacity.
  • Includes HDD rubber pads and 4" & 20" SATA cables.
  • LCD MENU DISPLAY: Built-in library manager with push button navigation menu to display drive info, configure, and manage drives.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive duplicator is backed for 2 years including free lifetime 24/5....
Check Stock

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

  • NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
  • Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
  • Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
  • Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
  • High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check Stock