ReviewsFitting Tool

SharkBite UC256LFA10 3/4

ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

Check Stock

Dixon Valve & Coupling 270AT Tool for Push-On Fitting, 13-1/2\ Length x 2-3/8\ Width x 7\ Height

Cuts push-on style hose and inserts the fitting.
Built-in cutter slices through 1/4" - 3/4" ID reinforced push-on hose without fraying.
Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
Tool has four 7/16" diameter mounting holes for bench mounting.
Measures 13-1/2" length by 2-3/8" width by 7" height.

Check Stock

RecPro RV Plumbing Fittings Wrench | Flair-It 16391 Plastic Wrench, 0.5\ Size

The Flair-it fittings create a connection that beats all other plumbing fittings on the market. They do not require a tool to install them, however, if you are applying them in a hard to reach area or if you would like some help in getting a grip on the screw cap, this plastic wrench is specifically designed to help..
With two ends for two different sizes of screw cap, this wrench can be used on all of the flair-it fittings. When you install the fitting with the wrench, it makes the process a bit easier, especially if you are placing the fitting in a low area or in an area that's hard to reach..
The wrench is made of the same high-quality white plastic and is durable and strong. There are identification marks above each of the two sides so that you can know the sizes of the screw caps for the two wrench sides. Helping you get a grip on the cap, this wrench is a handy tool when installing a flair-it fitting..

Check Stock

ATPEAM Pneumatic CV Joint Boot Spreader Expander | Universal CV Joint Boot Install Installation Tool Install Removal Air Tool Driveshaft Pneumatic Outer Cage Expander CV Axle Removal Tool CV Boot Tool

√ Universal stretch CV boot tool is made by plastic material, durable and practical to use. The fitting Cone Tool can be used reusable..
√ Smooth surface, It can protect the CV Boot Kit from he damage while it installation process..
√ Cars CV Boots, which is helpful to improve the work efficiency, save time and take it easily..
√ Widely applies to install the stretch CV dust cover CV joint drive shaft, which is very convenient..
√ The fitting Cone Tool can be used reusable..

Check Stock

Cen-Tec Systems 94225 Shop Vacuum 20 Ft Whip Hose and Power Tool Adapter Set for Dust Collection, Black

... The 1. 0” interior diameter adaptor press fits on the end of the 1” whip hose end and can fit over male power tool or shrouds with a 1. 0” male connection. The 1. 0” adaptor has four concentric rings to press fit firmly tonto the tool and hold during use. Some tools and shrouds accept this same fitting as a 1. 40” tapered male connection where to soft TPE material holds firm.
The second soft 1. 50” TPE adaptor for mating with major power tools and shrouds equipped for a 1. 50” hose connection. The 1. 50” adaptor will press fit onto either the shop vacuum hose swivel adaptor or onto the 1” whip hose end fitting as deemed appropriate for the application.

Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

...to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application.
DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64”| ABS vacuum dust hose adapter nominal 2-1/4"....

Check Stock

Cen-Tec Systems 95259 10 Ft. Home and Shop Vacuum Hose with Expanded Multi-Brand Power Tool Dust Collection Adapter Set and Full Attachment Kit, Black

The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
To change from the standard vacuum attachments into the power tool dust collection adapters, simply thread off the swivel adapter and thread on the extra-durable acetal clip ring, which then snaps into the corresponding adapter.
Designed to fit most major brands of p....

Check Stock

Alucy 3pcs Watch Hand Pressers, Wristwatch Repair Tool Pusher Fitting Set, Watch Repairing Tool Kit for Watchmakers Watch Worker

Applicable Occasions - This watch repairing tool kit with good 3 hand pressure tools, 5 different size holes, can be used for all watches. Set the hands and the tools are carefully polished to not scratch the dial..
Ideal Tool - These watch hand pressers are used when fitting watch hands to watch. This set of tools is suitable for repairing watches and is a good helper for watch repairers..
High Quality - Our watch repair tools are made of high quality stainless steel material, which is sturdy and durable for long time use.These are used when fitting watch hands to watch..
Easy to Control - The size you choose is slightly larger than the hole in your hand, which means you can press your hand without hitting the actual watch part, giving you a good control of your hand..
100% Satisfaction - Our watch repairing tool kit are designed and tested with great care.If you have any questions about our products, do not hesitate to contact us..

Check Stock

2-in-One Drip Irrigation Tubing Hole Punch Fitting Insertion Tools Drip Tube Hole Punch for Easier 1/4' Inch Fitting & Emitter Insertion (Pro Punch Tool Sets)

Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Irrigation pipe puncher can be used to perforate polyethylene pipes for installation of drippers and micro nozzles.
suitable for PE pipes with a diameter of 16/20 mm..
2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use..
About size: Punches Holes measuring 3 mm (0.118 Inches) for a snug fit to eliminate waste loss and maintain appropriate pressure in your drip system..
The package includes: 1 professional punch tool, 1 2 in 1 punch and accessory inserts. One-stop shop to meet your needs, this is a good tool for gardening and irrigation.

Check Stock

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

: This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
- : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
: The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
: With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
: TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..

Check Stock