Camco 39857 RhinoFLEX Clear 90 Degree Sewer Hose Swivel Fitting
- Clear fitting to see if holding tank is empty.
- Swivel lug and bayonet fitting for secure connection.
- Connect sewer hose to your RV’s waste valve fitting.
ReviewsFitting Valve
OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine
- Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
- Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
- Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers
- 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
- 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
- Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
- 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
- 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
mistcooling 250 PSI Misting Pump
- Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
- 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..
TOCHUN IBC Tote Butterfly Valve DN50 -Heavy Duty 75mm Taps Drain Connector for Water RainWater Tank-IBC Fittings Garden Irrigation Valve
- ...QUALITY IBC TOTE ADAPTER】The IBC tote valve introduces foreign technology, made of high-density polyethylene and other engineering plastics. It is assembled with novel structure and beautiful appearance. It has been used safely for 3,000 times and passed the drop test..
- 【SAVE TIME AND ENERGY】This IBC tote fitting is easy to install,just connect to the Water tank and you can Use it. The water tank adapter supplied with superior quality silicone gasket, which can effectively to prevent liquid from splashing around. Super durable and can be used repeatedly that perfectly save you time and money!.
- 【REPLACEMENT TOTE WATER TANK ADAPTER】This IBC tote valve is mostly used for chemical process and acid, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage. This IBC tote fitting has the advantages of anti-corrosion, acid and alkali resistance, durable, high mechanical strength, easy opening and so on..
- 【PACKAGE INCLUDED】2.95’’ IBC Adapter Ball Valve + IBC Tote Valve Cover + Spout Cap + Silicone Gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing)..
STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools
- ... their valuable time to search for such a water spigot because here it is..
- ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
- PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
- TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels whi....
Vobor Inflatable Boat SUP Pump Adaptor Standard Conventional Black Air Valve Adapter Attachment Air Pump Converter for Inflatable Rowing Boat Stand Up Kayak Paddle Board
- Leightweigh DesignThe Inflatable Boat SUP Pump Adaptor adopts fine workmanship and delicate design, convenient to use..
- Sturdy and DurableThis Boat SUP Air Valve Adapter is made of high quality of Copper and rubber, resistant high pressure, durable to use..
- Widely UseOur Air Pump Converter fits most paddleboards, canoes, rubber boats, assault boats, flushing pools, floating rows, inflatable beds, dinghy, kayak, etc..
- Quick InflationInflatable SUP valve adaptor, easy conversion, quick inflation.Use your compressor or tire pump to easily reach suggested PSI within 5-10min..
- Instructions With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure..
6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine
- Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
- 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
- High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
- Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
- IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
- It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
- 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)
- Material: 6061 anodized Aluminum for the manifold.
- Brass material with Nickel plating for fitting and drain valve.
- Working Pressure: 200 psi maximum working pressure.
- Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
- Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
- Installation: Easy installation and the tubing also can be removed if needed.
A664 Ground Plug Valve 1/8 in 30 Psi
- Connects Fractional Tube (Interchangable with all major brands i.e..
- STAINLESS STEEL PLUG VALVE/3K PSI - ONE PIECE - SUPERLOK PLUG VALVE.
GROW1 Collapsible Reservoir Water Tank 265 Gallon Water Storage Barrel Container Portable for Garden Plants Gardening Greenhouse
- COLLAPSIBLE WATER TANK – GROW1 Collapsible Water Reservoir Tank is a compact and flexible water tank. The perfect water storage tank for gardening to store water..
- LIGHTWEIGHT AND DURABLE – Made of long-lasting, durable PVC material, this lightweight water holding tank is able to withstand bad weather damage easily..
- EASY STORAGE AND TRANSPORTATION – Thanks to a flexible design, the portable water tank folds flat for easy transportation and compact storage..
- QUICK AND EASY SET-UP – No tools are required to assemble the water storage barrel. Assemble the water storage container in a couple of minutes. Store and move the water drum anywhere..
- FEATURES A TAP AND VALVE FITTING – An ideal water tank for garden, water tank for greenhouse, also ideal for daily use. Water holder tank features a 3/4'' tap, valve fitting, and 3/4'' fill fitting..