ReviewsFittings For Valve Core

Lichamp 3 Pieces 5FT AC HVAC Manifold Gauge Hose Kit with Ball Valve and 4 Pieces Hose Adapters Fits R134A R410A R404A R12 R22 R502 R1234YF Refrigerants

Professional ac hose kit for workig with ac hvac air conditioner manifold gauge, fits R134A R410A R404A R12 R22 R502 R1234YF type refrigerants..
5FT long hose kit with ball valve end feature a 4000 psi burst pressure and 800 psi max working pressure, Suit for most of ac hvac check and charge....
Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end ball valve for convenient and safe access to the system,....
Long lasting and rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability..
Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening, hose ends feature a strong six-sided crimp that provides....

Check Stock

Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool

All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool..
Valve Stem Puller - For installation or removal of snap in type tubeless tire valves.
Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves).
Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool.

Check Stock

34pcs Tire Valve Stem Tool Installer Kit- 20 Pcs Valve Cores with 8 pcs Alloy dust caps and 5 Pcs Valve Adaptersand a 4-Way Valve Tool

Advantages of the project: The perfect combination of valve core and valve core tools and valve dust caps,is very practical and has good compatibility. Includes 1 pcs 4-ways valve tool, 5 Pcs Valve Adapters，8 alloy dust caps and 20 valve cores..
Tools: valve tools make it easy to remove and install the valve core. The 4-in-1 tool also removes debris inside and outside the valve to assist in repairing the valve threads..
Tire valve dust cap and Valve Adapter： 8 alloy dust caps (2 color options),all of the Presta valve adapters and the valve caps are made of premium anodized aluminum. Constructed with standard screw threads and rubber o-ring seal design, prevent air leakage and makes it much easier to pump your bikes.Install the Presta to Schrader adapter, simply loosen the tip of the Presta valve and then screw on the valve adaptor, now your Presta valve is a Schrader valve. No need any complex installation..
Valve core: The nickel plating enhances the corrosion resistance of the valve core and valve stem, especially when robust steel shaft with a corrosion resistant plating these valve cores is copper nickel-plated valve coresinstalling the valve core into an aluminum valve stem.More durable, safe and reliable..
Portable storage box packaging: This t....

Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..

Check Stock

OTAUPRS 100Pcs Brass Tire Valve Stems Core Universal for Schrader Valve Stem of Cars Trailers Trucks RV Moped Motorcycles and Bicycles

Durable - Nickel plating valve stem core can effectively prevent rust and corrosion, so it is more durable. This is a process upgrade to the traditional copper valve core that is easy to rust..
Essential Tool: Whether in your journey or in your garage, the car spare valve stem core can play a huge role. Similarly, it can be used in the car repair shop for the customers..
Widely Application: Valve core for ATV tire, truck, car, RV, lawn mower, motorcycle, jeep, bicycle, electric cars, etc. In fact, it is suitable for most vehicle tires, and Schrader valve cores are also used in many refrigeration and air conditioning systems..
High Quality - 100% leakage tested, Maximum working pressure is 300PSI, Schrader valve core giving you a safe tire system, a worry-free journey..
What You Get: 100Pcs Schrader valve core (also called US/American valve)..

Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 30 Gallon RV Waste Black Water Holding Tank WT-3000

30 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock