ReviewsFlange Ball Bearing

White Ceiling Mount Curtain Track System with Ball Bearing Carriers and Hooks 22 - in 3 Sections

Heavy duty white aluminum drapery or curtain track sets. Track size is 3/4" High x 1 3/16" Deep (including small flange with holes).
This simple hand draw set can be used with pleated draperies or grommet curtains. The small flange on the back with holes punched every 16", make it an installer's favorite.
3) ball bearing carriers and 3) 1 1/4" hooks PER FOOT are included. Ie., an 8' set will include 24 of each.
Each set also includes, 2 end caps, standard screws and instructions. Can easily be trimmed with a hack saw.
Longer sets come in 2 or 3 equal sections for shipping purposes..

Kit includes ball bearing blower, 3-prong power cord, rheostat, thermostat, galvanized mounting bracket, noise reduction padding and installation....
Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI....
Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CW Rotation, 120° /....
High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model....

Material:The ball screw is made of high-quality bearing steel material, high service life time due to low friction.
low operation noise, Compact design for easy installation and removal.
Dimensions:Ball screw nut inner diameter:16mm, Lead: 5mm,outer diameter:28mm,flange diameter:48mm,Height: 42mm, ball screw nut pitch:5mm.
Function:The main function of this ball screw is to convert rotational motion into linear motion with high accuracy, reversibility and high efficiency,No stick-slip effect.
Package Content:1PCS Ball Screw Nut SFU1605, 1PCS Black Rod.
Widely used:Applicable to SFU1605 ball screw, easy to install.

Kit includes ball bearing blower, 3-prong power cord, noise reduction padding and installation instructions.
Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI....
Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CW Rotation, 120° /....
High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model....

Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Set screw locking for secure attachment to shaft.
Contact seals on both sides of the bearing keep lubricant in and contaminants out.

Kit includes 100% ball bearing blower, 3-prong power cord, rheostat variable speed controller and thermostat. Also includes galvanized mounting bracket, noise reduction padding and installation instructions.
Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA.
Total Length = 13.63″ x 4.63″ x 4.5″ | Blower Length = 12.5″ Width = 3.73″ Height = 3.23″ Flange Opening = 9 1/2″ | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CCW Rotation, Magnetic 120° / 90° Thermostat, Class H Motor Insulation (rated to 392°F / 200°C).
High Quality Sealed Ball Bearing Motor – Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
Does it fit your fireplace? See our compatibility chart in description. If you don’t see your model listed or have installation questions, please contact us directly..

Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Set screw locking for secure attachment to shaft.
Contact seals on both sides of the bearing keep lubricant in and contaminants out.

SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Flange.
FEATURES:This Bearing is a self-aligning, pillow block bearing.
MATERIAL: Zinc Alloy Flanged Base, rust-proof, durable, have long Life.
APPLICATION:Pillow Block Bearing Flange Block Bearing is widely used in various of machinery.
NOTE:Can be used in transportation, transmission system, feeding systems, processing system, processing machinery.

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
Kit Includes: 2x Front Wheel Bearing & Hub Assemblies + 2x Front Upper Control Arms w/ Ball Joints + 2x Front Lower Ball Joints + 4x Front Inner &....
Hub Specifications: Position: Front| Lugs: 6 Bolt| ABS Type: Sensor Wire| Flange Type: 3-Bolt Triangular.

Includes ball bearing blower, 3-prong power cord, rheostat variable speed control, and thermostat.
Velcro mounting strips, noise reduction padding, and installation instructions are included.
Total Length = 12.5″ Width = 3.23″ Height = 3.73″ Flange Opening = 9 1/2″.
Designated wall switch for blower NOT REQUIRED.