ReviewsFlange Coupling

Martin 6018 Coupling Chain, Steel, Inch

  • For use with Martin Quadra-Flex series flexible couplings (sold separately).
  • Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.
  • Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly.
  • Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life.
Check Stock

T002 58 Pc. Clamping Kit 5/8\-T, 1/2\-13 Thread Bridgeport Mill Set Up

  • Each clamping kit includes: (24) studs (6) step block pairs (6) t-nuts (6) flange nuts (4) coupling nuts and (6) end hold-downs.
  • Made of powered casting steel, heat treated.
Check Stock

Kato USA Model Train Products N Bethgon Coalporter 8 Car Set - CSX

  • Shock absorber construction and low-flange metal wheels provide smooth operation.
  • The removable coal load lets operators run full or empty between coalmine and terminal.
  • The internal bracing of the tub, close coupling between cars and detail lettering on these cars make them look just like the real equipment.
Check Stock

TEXALAN Hold Down Clamp Clamping Set Kit Bridgeport Mill (11/16\ Slot 5/8\ Stud)

  • [SIZE]: Table Slot: 11/16IN, Stud Size: 5/8IN-11.
  • 4 pieces 3, 4, 5, 6, 7, 8" Long, 4 coupling nuts, 6 flange nuts, 6 T-slot nuts , 6 serrated end clamps, 6 step blocks, Wall Holder.
  • [MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts are heat treated..
Check Stock

Martin ML095BLK 7/16 Universal Series Jaw Coupling, Sintered Steel, Inch, 0.438\ Bore A, 0.438\ Bore B, 2.125\ OD, 1\ Length, 189 in-lbs Nominal Torque

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

HFS (R) Hold Down Clamp Clamping Set Kit Bridgeport Mill (3/4\ Slot 5/8\ Stud)

  • [SIZE]: Table Slot: 3/4IN, Stud Size: 5/8IN -11.
  • 4 pieces 3, 4, 5, 6, 7, 8IN Long, 4 coupling nuts, 6 flange nuts, 6 T-slot nuts, 6 serrated end clamps, 6 step blocks, Wall Holder.
  • [MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated..
Check Stock

SHARS 3/4\ T-Slot 5/8\-11 Stud 38 PCS T-NUT & Stud Set 202-4912 1[

  • Use for clamping set-up on mills, boring machines, presses, etc.
  • 4 Flange Nuts, 4 T-Slot Nuts, 4 Coupling Nuts, 1 T-Slot Cleaner.
Check Stock

Bernkot Square Shower Drain 6

  • ...prevent hair and debris from clogging pipes..
  • One Grate,Two ChoiceBernkot 6" floor drain has 2-in 1 flat and tiles grate. With its 2 in 1 grate, it's possible to choose between a brushed stainless steel look or your own bathroom tile, which results in a completely invisible shower drain..
  • Versatility 1)Fits US No-Hub coupling. Please note 2" drain flange is not included, search "Bernkot ABS shower drain base" or "Bernkot PVC shower drain base". 2) Compatible with Schluter Kerdi Integrated Bonding Flange by "Bernkot ABS Lateral Adjustment Ring", which could offer more choice for you to choose right drains. Drain height is adjustable by thread adapter..
  • Well Packaged and Easy to CleanEasy to install according to our instructions. 6" square shower drain kit includes tile inserted square shower drain cover, hair/debris strainer, tile tray supporter, threaded adapter with O-ring rubber, and lifting hook that you can lift off the cover easily to clean..
Check Stock

HFS (R) Hold Down Clamp Clamping Set Kit Bridgeport Mill (5/8

  • Includes: 24 studs (4 pieces of each 3",4",5",6",7",8" long), 6 step block pairs.
  • 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall caseDescriptionTable T-Slot size: 5/8" Stud size: 1/2"-13 T Nut No. TN-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2pcs Each size) Setp Block: STB-1, STB-2, STB-3 (2pcs Each size).
Check Stock

New 58 Pcs Pro-Series 1/2\ T-Slot 3/8\-16 Stud Clamping Kit for Bridgeport Mill

  • Made of high quality casting steel for long life and increased durability..
  • 24 Studs: 4 each of length: 3"-4"-5"-6"-7"-8" 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps.
Check Stock

100mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine

  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing....
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω.....
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 100mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw....
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum....
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of....
Check Stock