ReviewsFlange Type Elevator Motor

iPower GLFANXEXPSET4CHUMD 4 Inch 118 CFM Inline Filter with Fan Speed Controller and Temperature Humidity Monitor Grow Tent Ventilation, 4\ Kits, Black

4 Inch 150 CFM Duct Inline Fan Blower: Composite fan blades and center hub which reduces noise and vibration.
4 Inch Filter: Dimensions, 4 inches Flange Ducting x 12 inches Length, Reversible flange. Free Pre-Filter included. We recommend replace the Pre-Filter every 6 months to protect your filter.
Fan Speed Controller: Variable Speed, OFF, HIGH, medium, low. To avoid the risk of burning out the fan motor, controller does NOT adjust below 50%.
Free High Reliability and Accuracy Humidity Monitor: Fast response that measures every 10 seconds, wide measuring range that measures temperature from 14℉ to 122℉（-10℃~50℃). Humidity sensor measures humidity from 10% to 99%. Powered by 3V CR2032 button battery (included).
Multi Functional: This ventilation combo removes heat and eliminate the undesirable ill-smelling odors in the grow tent to solves air delivery problems without major system rework or expense.

Check Stock

Elevator Buttons Mechanic Technician T-Shirt

The Elevator Design is for Elevator Lovers or Elevator Mechanics who love to ride an elevator instead of walking up stairs. The Elevator Engineer or Technician will repair the buttons panel if the elevator is broken. Then You'll have to Use The Steps..
Lightweight, Classic fit, Double-needle sleeve and bottom hem.

Check Stock

Chain Coupling Sprocket, Bore 3/4 in

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Martin 9HS Quadraflex Sleeve, Hytrel, Inch, 6\ OD, 3\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Martin 9JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 6\ OD, 3\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Tanstic 80Pcs 3/16'' x 9/16'' / 3/4'' / 13/16'' / 1\ 4 Sizes Flange Aluminum Blind Rivets Large Head Tri-Fold Exploding Pop Rivets Assortment Kit (Black)

Material: Made of high quality aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
Rivet Head Size: Diameter 3/16"(4.8mm), Length: 1"(25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm).
The flange is larger than common type, with larger contact area, can increase torque strength and withstand higher radial tension..
Package: 60pcs 4.8x25mm Large Flange Aluminum Blind Rivets.

Check Stock

Kraus KGTW2-33MB-100-75MB Bellucci Drop-in Granite Composite Single Bowl Kitchen Sink in Metallic Black with Accessories with WasteGuard Continuous Feed Garbage Disposal

...sinks with standard round 3 1/2" drain opening and 1 1/2" standard kitchen plumbing connections – KIT INCLUDES: Kitchen sink, heavy-duty cutting board, roll-up dish drying rack, drain assembly with strainer, 3/4 HP garbage disposal, drain and dishwasher connectors, power cord, sink drain stopper/plunger, mounting flange with stainless steel rim.
WORKSTATION SINK with integrated ledge that allows you to slide custom accessories across the sink to streamline meal prep and cleanup – HIGH-QUALITY Granite Composite made from 80% natural quartz and high-performance acrylic resin for exceptional durability with the look and feel of real stone.
DROP-IN DESIGN with extra-thick mounting deck installs with any type of kitchen counter, perfect for use as a replacement sink – All mounting hardware included – POWERFUL PERFORMANCE: KRAUS WasteGuard Garbage Disposal offers fast and reliable grinding of the toughest food scraps – SUPERIOR 3800 RPM TO 3/4 HORSEPOWER ratio eliminates waste in seconds.
EASY-INSTALL: EZLock 2-step mounting assembly locks into place with ease – Mounting flange drops into drain opening with no need for plumber’s putty for most sinks – CONTINUOUS FEED DISPOSAL: Activated via wall switch or air switch (sold separately), the garb....

Check Stock

Martin 8JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 5.063\ OD, 2.5\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Martin 6EM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 1.875\ OD, 1.875\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

Check Stock