ReviewsFlanged Fitting

Old Mountain 10178 Pre Seasoned 12-Quart Dutch Oven with Flanged Lid, No Feet

  • Old mountain logo embossed on flanged lid.
  • Flanged lid to hold coals for even camp cooking.
  • Versatile flat bottom for ease of use in kitchen and oven.
Check Stock

Needenr 4 Sets (16pcs) Flanged Hex Head Bolts,M10-1.5x40mm Stainless Steel Flange Hexagon Screws Bolts & Nuts Kits for Exhaust Manifold Hardware Kit M10x40mm M10-1.5x40

  • M10x40 Flanged Hex Head Bolts and Nuts Sets Incluidng: 4PCS M10*40mm Flanged Hex Bolts , 4PCS of M10 Flange Hexagon Nuts.4Pcs of Flat Washers,4Pcs Spring Lock Washers..
  • Aftermarket Exhaust Manifold Hardware Kit.
  • Material Made with Stainless Steel 304 provide good strength and corrosion resistance.
  • M10-1.5Flanged Hex Head Bolts Screws,Thread Diameter 10 mm, Thread Size 1.5 mm .Thread Pitch:40mm.
  • Widely used in a variety of industries such as construction, manufacturing, engineering, assembling,and so on..
Check Stock

Pearl JJ1365N Joey Jordison Signature Slipknot 13'' x 6.5'' Steel Snare Drum with Black Hardware

  • 3mm triple-flanged hoops and brass snare wires.
Check Stock

SKF F4BM 207-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 2-7/16" Bore, 5-5/8" Bolt Hole Spacing, 11840lbf Dynamic Capacity

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster MFC-20 Medium Duty Piloted Flange Cartridge, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/4\ Bore, 5\ Overall Length, 2.917\ Bolt Hole Spacing Width, 3/8\ Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a pilot extension for accurate location and increased stability.
  • Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster SF-24 Standard Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/2" Bore, 5-1/8" Overall Length, 4" Bolt Hole Spacing Width, 9/16" Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster MSF-35 Medium Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 2-3/16" Bore, 6-7/8" Overall Length, 5-5/8" Bolt Hole Spacing Width, 13/16" Flange Height, ±2 Degrees Misalignment Angle

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
  • Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

1 Pcs Led Light Bulb LED28MFR-DC 0.50 Watt Midget Flanged Base Bulb | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb LED28MFR-DC 0.50 Watt Midget Flanged Base Bulb.
  • Voltage: 28V, Current: 20mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Red.
Check Stock

1 Pcs Led Light Bulb 0.50 Watt LED6MFWW-DC Midget Flanged Base Bulb | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb 0.50 Watt LED6MFWW-DC Midget Flanged Base Bulb.
  • Voltage: 6V, Current: 80mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Warm White.
Check Stock

1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC - EOV49 | #YY2R

  • You will receive 1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC.
  • Voltage: 28V, Current: 20mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Red.
Check Stock

Sintron 15 Amp Flanged Inlet 125V, NEMA 5-15P Shore Power Inlet Receptacle, Generator AC Port Electric Plug 1875W, Weatherproof Cover Recessed Male Outlet, ETL Listed, Straight Blade 2 Pole 3 Wire

  • ✅【CERTIFICATION: ETL】ETL listed. Safety and quality are highly valued at Sintron products, the Sintron 15 Amp flanged inlet receptacle is compliance to North American safety standards..
  • ✅【WIDE APPLICATION】This shore power plug widely used in RVs, campers, cars, trailers, boats, ships, marine heaters, houses, bumpers, embedded socket boxes, etc., not only as generators or battery charger plugs, but also for power your electronic devices..
  • ✅【WEATHERPROOF】Built to withstand harsh environments for the straight blade power inlet has a NEMA Type-3R enclosure rating ensuring superior protection against rain, sleet and damage from external ice formations..
  • ✅【RELIABLE & DURABLE】Sintron's commercial/industrial grade flanged wiring device with nylon dead-front construction and thermoplastic wiring module is available in 15A version and feature heavy duty construction for many years of service life..
  • ✅【EASY TO INSTALL】2" hole size, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 free Stainless Steel screws to help you more firmly fix straight blade flanged inlet receptacle on the hole or wall fast..
Check Stock