ReviewsFlanges Series

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Martin 6EM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 1.875\ OD, 1.875\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Willow Pump Breast Pump Flanges 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags Clear 27mm

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective....
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast....
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm,....
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re....
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally....
Check Stock

Maymom Flange Inserts 17 mm for Medela Spectra 24 mm Shields/Flanges Momcozy/Willow Wearable Cup Compatible with Medela Freestyle Harmony to Reduce 24mm Nipple Tunnel Down to 17 mm 2pc/Each

  • 17 mm inserts to use with Medela/spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 17 mm. Also suitable for Ameda Mya Pro,....
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm....
  • Can be compatible with Spectra 24mm flanges, Motif Luna 24mm flanges, Ameda Mya 24mm flanges, Ameda Mya Pro 24mm flanges, Ameda Purely Yours 25mm....
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Maymom Flange Insert 21 mm Compatible with Medela and Spectra 24 mm Shields/Flanges Use with Medela Freestyle and Sonata to Reduce Nipple Tunnel Down to 21 mm Also Fit Momcozy 24 mm Cups 2pc

  • Maymom 21 mm inserts to use with Medela 24 mm shields and more. It will reduce the 24-mm shield nipple tunnel down to 21 mm. Great solution for....
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm....
  • Can be compatible with Spectra 24mm flanges, Motif Luna 24mm flanges, Ameda Mya 24mm flanges, Ameda Mya Pro 24mm flanges, Ameda Purely Yours 25mm....
  • Also fits freemie 25 mm cup to reduce it down to 21 mm..
Check Stock

Vinyl Works Deluxe Adjustable in Step Above Ground Pool Ladder, White

  • Step-in pool ladder with double handrails for easy, safe entry and exit into an above-ground pool.
  • Designed and intended for use with an above ground pool with up to 4.5- to 5-foot side walls and a flat bottom.
  • 2 deck mount flanges for greater stability offering a 300-pound load capacity for one user at a time.
  • Top-step platform adjusts from 44 to 60 inches tall to pass over pool walls and the ladder is 24 inches wide.
  • Includes both deck mount flanges and front mount flanges (with hardware) that can be used to mount directly to a pool deck.
Check Stock

Lovejoy 68514436414 36414 Size 7E 2-Piece Design S-Flex Coupling Sleeve, EPDM Rubber, 4.34\ OD, 2.19\ Length, 725 in-lbs Nominal Torque

  • For use with Lovejoy E type S-Flex series flexible coupling assembly (sold separately).
  • EPDM synthetic rubber for transferring and absorbing shock load.
  • Two halves with a metal retaining ring for applications where the coupled shafts are difficult to separate.
  • Teeth help to distribute torsional load across the sleeve and flanges, reducing wear and extending service life.
Check Stock

Toilet Quality Controller (Background Score)

  • ✔ PRODUCT DESCRIPTION: Universal Toilet paper holder with 1/2" npt (.8" O.D.) pipes. All pieces powder coated a glossy black. No oil and no rusting. Mounting screws (4) and anchors (4) included!.
  • ✔ ADVANTAGES: This product uses quality 1/2” npt fittings, UNLIKE most of the other smaller (3/8” npt) products on the market. Use this product for any DIY Decorative or Design project-Have fun!.
  • ✔ QUALITY FLANGES (3.4") are designed to mount completely Flat to the wall unlike many of the smaller diameter (2.7”) flanges. The larger flanges improve strength of your tp holder mount, because of the larger surface area of the flange mount..
  • ✔ PREMIUM FINISH: The product is E-Coated Black, so there is no need to clean or degrease these parts. This coating also prevents corrosion- NO RUSTING!.
  • ✔ WHATS INCLUDED: 1- Flange (3.4"), 1- Straight 1/2 npt pipe ( 6” long), 1- Elbows, 1-straight 1/2 npt pipes (2.25” long), 4- Black wood screws, 4- Drywall Anchors..
Check Stock