ReviewsFlap Discs Coarse

PRETEC Grinding & Cutting Wheels 4 1/2 inch Set,Angle Grinder Wheel Set,Cut Off Wheels 20pcs,Grinding Wheel 3pcs,4.5” Flap Discs 3pcs for Angle Grinder for Cutting Grinding

  • 【Grinding Wheel Set】4-1/2 inch angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel,3 pcs grinding wheel,3 pcs 80 Grid flap disc.Also with a sturdy carrying case for holding 4.5”cut off wheel for metal..
  • 【Cutting Wheel】20PCS cut off wheels 4 1/2 inch has passed the CE&ISO certification, built for a more robust and safety cut off wheels.Fast burr free cutting with minimal material loss, Will not splash and cause injury..
  • 【Grinding Wheel:】3 pcs premium 4-1/2 “* 1/4 “* 7/8 “Grinding Disc for metal and stainless steel, T27 bevel type, A24T Aluminum Oxide Grains for Aggressive Grinding and High Stock Removal. Operating up to 13,000 RPM and 80M/S. Meet almost all your general polishing requirements..
  • 【Flap Disc: 】3 pcs flap discs, Constructed of industrial grade premium zirconia. Durable,good abrasion resistance,and anti-clogging.4.5″ * 7/8 inch arbor size flap disc is compatible with most air and electric angle grinders..
  • 【Long Lasting Discs】Our disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
Check Stock

Weston Stainless Steel Food Mill , 2 Quart Capacity, 3 Milling Discs, Dishwasher Safe

  • Three Stainless Steel milling discs: fine (2 mm), medium (3 mm) and coarse (8 mm).
  • included components: Weston 61-0101-W Stainless Steel Food Mill.
  • Includes 3 stainless steel milling discs that prevent pulp and skins from slipping through: 2mm fine milling disc.
  • Approximate 2-quart (1.9-Litre) capacity.
Check Stock

LotFancy Flap Disc 4 1/2 Inch 20PCS 40 60 80 120 Grit Grinding Sanding Wheels Aluminum Oxide Abrasive Type #27 for Angle Grinder

  • VALUE PACK: 40 60 80 120 grit Assorted, 4-1/2 Inch Diameter, 7/8 Inch Arbor, Type #27, 13300RPM maximum speed.
  • HIGH PERFORMANCE: Premium resin-bonded aluminum oxide abrasive produces high performance: durable, good abrasion resistance, anti-static and anti-clogging.
  • Fiberglass backing providing durability and reinforcement.
  • Assorted grit flap discs satisfying all your blending, sanding and finishing requirements from coarse to fine.
  • Widely used for rust, paint, ferrous metals, stainless steel, non-ferrous metals, wood and plastics.
  • Fits most 4.5” Angle Grinders, such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more.
Check Stock

PEGATEC 40 Grit Flap Discs 4 1/2 inch Flap Wheel Type 29 Flap Sanding Disc with 7/8 Arbor Aluminum Oxide Abrasives for Grinding, Blending, Sanding and Finishing - 10 Packs

  • High Grinding Efficiency - the surface of the sanding discs is equipped with a heat-resistant and anti-stick coating, and the high-strength aluminum oxide raw material which improve the grinding efficiency by 55% while ensuring the smooth surface of the material.
  • T29 15°Design, widely used - Our flap disc adopts T29 15° design, which is suitable for fine grinding of flat, curved, chamfered and concave-convex surfaces. The thick cloth base and high-tenacity cotton lining make the sanding discs more flexible, can be reached an excellent polishing effect.
  • Thickened Glass Fiber Mesh Cover - The glass fiber mesh cover design of our grinding wheels is combined BASF (resin adhesive),it is more wear-resistant than an ordinary plastic mesh cover so that the service life is increased by 2 times. The blade knob is made of PE which will not break even at 13500RPM.
  • Prevent Thermal Burns - In the grinding process, the temperature of general flap discs is too high, it is easy to burn the metal and make the metal discolor, which will reduce the hardness and toughness of the metal. The patented ratio of PEGATEC flap disc enhances heat dissipation and avoids thermal burns.
  • Multi-Purpose Sanding Discs - Angle grinder flap disc is designed to grind various materials,can b....
Check Stock

Disney Little Einsteins The Incredible Shrinking Adventure

  • ▶️ LONGEST LASTING: Quick change discs have long life.Wide selection of grits and grains.Easy to use.Our product are made of premium grain and....
  • ▶️ Upgraded ALuminum: Roll lock discs are made for high-quality proffessional aluminum oxide.We have done a lot of testing to give you the most....
  • ▶️ BEST MATCH SIZE: Sanding discs roloc 2” surface conditioning discs-Coarse/Medium/Fine total 46pcs incloud 1/4 inch shank roll lock disc....
  • ▶️ MAX PERFORMANCE: Surface conditioning discs are uitable for stainless steel, alloys, non-ferrous materials, plastics, and fiberglass.
  • ▶️ QUICK CHANGE FOR SAVING TIME: Abrasive sanding discs are ideal for deburring, finishing, and cleaning on flat or contoured surface of metals to....
Check Stock

SI FANG 4 1/2in x 7/8in Premium Zirconia Flap Sanding Disc Abrasive Grinding Wheel Mix Set Include Grit 60 80 120 240 320 Stearate Coated Perfect for Polishing Copper Aluminum Soft Metals and Paint

  • ▲【Package Include】 10Pcs 4.5in x 7/8in Flap discs , Grit 60/80/120/240/320 each 2Pcs ,satisfying your requirements from removal to fine polishing ,Made of hard zirconia alumina material, each flap disc contains 80 flaps, compared with 70 flap discs, the service life is longer and the polishing effect is better..
  • ▲【Size】 Outer Diameter: 4.5'' ,Inner Diameter: 7/8'' ( 115mm x 22mm) , Bevel Type, Mix RPM : 13300 ,Fit for most makes of 4.5'' angle grinders. Such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more.
  • ▲【Feature 1 】 The stearate coating makes the flap disc green, it will liquefy when heated and provide a protective coating on the flap to prevent load/gelation on soft metals, prevent adhesion of soft metals, paint, etc. Suitable for polishing car paint, softer metals such as copper, aluminum and bronze.
  • ▲【FLAP DISCS WITH Turbine BACKING PLATE】 Our Flap Sanding Disc use ORANGE SWIRL BACKING PLAT with better quality than FIBERGLASS BACKING PLATE. In addition to greatly improving durability and service life, we have also added new features such as dust resistance, anti-blocking, and heat dissipation, which make it more effective in absorbing vib....
Check Stock

5 Pack 2\ Quick Change Roloc Easy Strip & Clean Discs for Paint Rust

  • 2" Easy Strip Premium Blue (Extra Coarse) Non-Woven, Nylon Webbing.
  • Cleans Welds, Remove Rust, Paint, Scaling and Oxidation Effortlessly.
  • Blue Clean and Strip Discs has a longer life than Black Clean and Strip Discs.
Check Stock

Man of La Mancha

  • ✅ Meet All You Need – This premium flap disc set includes 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit and 2 pieces of 120 grit,....
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built....
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications.....
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set....
Check Stock

WORKPRO 5 Pack Zirconia Flap Disc, 40 Grit, Angle Grinder Sanding Disc, 4-1/2 inch Grinding Wheels, Flap Wheel Type#27 for Metal Grinding, Blending and Smooth Finishing

  • WHAT YOU GET- The 5 pieces zirconia flap disc of 40 Grit is included in this valuable set. The quantity can meet your every need. Flap discs are versatile and provide the ideal choice for multiple stages and processes within metal fabrication, from stock removal to smoothing out surface imperfections and deburring. This is a very good choice on carbon/mild steel applications, for less vibration and resulting fatigue, as well as reduced noise..
  • QUICK CHANGE AND SAFETY- From a product performance standpoint, this flap discs with ALUMINUM BACKING plates offer fast stock removal and provide grinding, blending and finishing with one product at a lower cost. They are also lightweight, easy to maneuver, and require less change over time..
  • HIGH-QUALITY ZIRCONIA ALUMINA FIBER MATERIAL-ZIRCONIA ALUMINA Comes with higher efficiency and double abrasion resistance, the excellent blend of zirconia and aluminium oxide grain which provides a very good cut rate to cost ratio. Angle grinder sanding disc made of zirconia alumina has a self-sharpening characteristic, which gives it a long product life and is great for aggressive heavy grinding of metals such as carbon steel and stainless steel..
  • BEST MATCH SIZE FOR ANY TYPE 27- Flat flap discs of T27 are used primarily on....
Check Stock

Benchmark Abrasives 3\ Quick Change Zirconia Flap Discs - 10 Pack (40 Grit)

  • QUANTITY: This is a pack of 10 premium zirconia quick change flap discs..
  • DIMENSIONS: 3" Diameter with a Male R-Type backing pad.
  • APPLICATIONS: Zirconia discs provide a very good cut rate to cost ratio. They are the go-to choice on carbon/mild steel applications. You can also use them on stainless steel, aluminum and other alloys..
  • USE: Our QC discs are made for use on a die grinder and should be only be used with the proper mandrel. 3" discs should be used with a 3 inch mandrel..
  • INFO: Our discs are made with a special, self-sharpening zirconia grain that are designed for aggressive stock removal, enhanced surface quality and long life..
Check Stock

AUSTOR 103 Pcs Sanding Discs Set 2 Inches Quick Change Disc with 1/4 inch Tray Holder for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal

  • Value and practical set - come with 103 pcs sanding discs set, including 48 pcs Aluminium Oxide discs, 15 pcs nylon SiC sanding discs, 32 pcs Zirconium Oxide discs, 3 pcs Ceramics discs, 2 pcs black strip discs, 2 pcs compressed wool discs and 1 pc 1/4" shank tray holder.
  • Nylon SiC sanding discs - open-mesh 3D structure in 3 sizes, coarse, medium and fine.
  • the superior hardness particle provide strong and fast cutting force, enable it can work well on various of shapes surface, even the rugged one.
  • Ceramics sanding discs - 3 grits (36/80/120), strong cutting force and long service life, apply for polishing hard metal, such as titanium alloy.
  • perfect for rust removal, works well on hard surface.
  • Aluminium Oxide discs - premium aluminium oxide sandpaper with strong R-lock shank base, 6 kinds of common grit (36/60/ 80/ 120/ 180/ 240) to meet your various polishing requirements.
  • Unique torque spiral - AUSTOR sanding discs with torque spiral design, easy for you to replace the sanding disc only twisting it to remove or connect, the torque spiral can connect the sanding disc with the tray holder tightly, which keep the sanding disc work steady even at high speed.
Check Stock