ReviewsFlare To Npt

AC PERFORMANCE Aluminum Straight 1/8 NPT Male to 1/4 Hose Barb Fitting Adapter Fit for AN4 Push on Hose Black

Size: 0.27'' (6.86MM) hose barb to 1/8" npt male pipe connector, Degree: straight.
Made of high performance lightweight 6061-T6 cnc machined aluminum.
Surface treatment: black anodized finish for durability and strength.
AN adapter side seals on the flare (cone) not the threads and the NPT side seals on the threads.
Precision machined to exacting tolerances for trouble-free performance.

【3/8" Quick Connect Kit】For use with natural gas or propane systems.
【Quick Connector】Add a convenient connect/disconnect method, automatically shuts off flow when you disconnect the hose.
【Application】It can be assembled in different ways to meet your varied needs. Perfect for heating, cooking, camping, etc..
【NPT Thread】The threads are 3/8" NPT, but NOT 3/8" flare. Please make sure these fittings meet your needs before ordering..
【High Quality】100% Heavy duty solid brass construction, makes it strong and corrosion-resistant.

PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
2 x AN-6 flared to 1/4 In NPT billet adaptors.
4 x AN-6 flared to 3/8 In NPT billet adaptors.
4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..

Size: 3/8" (9.52MM) hose barb to 1/4" npt male pipe / tube connector, Degree: 90 degree elbow.
Made of high performance lightweight 6061-T6 cnc machined aluminum.
Surface treatment: black anodized finish for durability and strength.
AN adapter side seals on the flare (cone) not the threads and the NPT side seals on the threads.
Precision machined to exacting tolerances for trouble-free performance.

21 Inch QCC1 Hose and regulator with 1/8" NPT Male Thread fits Spirit 500 & 700, Genesis 1000-5000, and Platinum I & II gas grills.
Fits Weber models Spirit 500 and 700, Genesis 1000 through 5000 and Platinum I & II gas grills.
SAFETY &CORROSION RESISTANT- Long lasting 100% Solid Brass Construction fittings,Provides secure, airtight connection between grill or fire pit and....
Please Note: The end is 1/8" NPT Male Thread NOT female. Does not fit current weber grills requiring a 3/8" female flare connection.
Includes 21-Inch QCC1 hose, regulator. Suggest using PTFE Tape or adhesive to avoid fuel leaks.

Premium Quality: The kit is made of high-quality rubber and brass, more durable, gives you new flexibility..
Propane Brass Tee: 1/2” NPT Female Thread x Excess Flow Soft Nose POL x 1"-20 Male Throwaway Cylinder Thread x 1/4” female inverted flare..
5' auxiliary tank hose: Soft-nose male POL x 1/4" inverted male flare..
12' additional appliance hose: 1" male x 1" female swivel -20 throwaway cylinder thread..
Widely Used: Easy to install, Very safe and convenient. Great for camping, having an outdoor cook, grills, heater, A must have if you are a RVer..

CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
MADE IN USA with high quality components and assembly.

[COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
[SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
[PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
[NOTE]--The propane stove orifice is not fit for potable water appliances..
[SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..

Allows removal of empty cylinder for refill without interrupting propane supply.
Inlets are 1/4" SAE inverted flare and outlet is 3/8" NPT female pipe thread.
For RVs with dual propane tanks. Automatically switches from primary to reserve tank when primary is empty.
Primary cylinder 210,000 BTU/hr capacity.
Double stage design maintains constant gas pressure under changing demand and conditions.

Bulkhead pipe and tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting pipes to tubes through a container wall in hydraulic applications.
Male 3/8-18 NPT threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes.
Zinc-plated steel for strength, durability, and resistance to corrosion.
Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.