ReviewsFlaring Tool An Fittings

Cal-Van Tools 165 Master Inline Flaring Kit - Double and Single Flares Brake Flaring Tools Professional Tool Kit

  • Specifications: this flaring set includes 3/16 in., 1/4 in., 5/16 in. and 3/8 in. double and single flares which are designed to reduce the chance of....
  • Equipment Design: with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double....
  • Flaring Tool Adapters: in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line....
  • Tubing Tool Kit: with the clamp and screws laying pressure directly over the tube, there is a great chance of the tube slipping from the clamp.....
  • Durable Material: flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel materials — perfect for tough job sites.
Check Stock

Double Flaring Tool Kit 7 Dies with Tubing Bender (Flare Tool) and Pipe Cutter (1/8” to 1-1/8” Inch / 3-30mm) For Automotive Brake Line Copper Brass Aluminum

  • Complete kit: the flaring kit is all that is included, complete with dual flaring capabilities, allowing the mechanic to focus on the job rather than looking for parts..
  • Extensive torch adapter: double flaring toolset features 7 adapter sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" to help artisan complete the entire range of brake line flaring tool projects..
  • Precision and durability: this twin torch kit is made of the strongest steel material and chrome-plated for easy handling and precision..
  • Double flaring tool: this multi-purpose flaring tool has double flaring function, providing users with a wide range of applications and versatility..
  • Self-centering yoke: the brake line reamer tool consists of two rods covering seven diameters, with self-centering, slideable forged steel yoke to help form a professional and high quality yoke..
Check Stock

Anderson Metals-50066-0604 Brass Tube Fitting Coupling 3/8 Compression x 1/4 Female Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminium, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals 50062-06 50062 Brass Compression Tube Fitting Union 3/8 x 3/8 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/4 x 1/4 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/2 x 1/2 Tube OD

  • Three piece construction - nut, sleeve and body..
  • USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe..
  • Easy to disassemble no flaring tool required - See chart for Assembly instructions..
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals - 50069-0606 50069 Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 3/8 NPT Male Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 1/2 NPT Male Pipe 50069-0608 Copper

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock